The Photogenic PL625DRC 250W/s PowerLight Monolight (UV) offers speed, power and control, a wide choice of accessories and intuitive operation backed by impressive specs at a very reasonable price.

What good is a light if it keeps you in the dark? The PL625DRC keeps you fully informed of your power levels via its large highly readable digital display. Power settings are adjustable in 1/10 or ½ stop increments across 6 stops. The modeling light can be set to Proportional to let you pre-visualize your final shot when using multiple lights. Other settings include Full On, OFF and manual control of the modeling light output.

The PL625DRC recycles to full power in a lightning-fast 1.2 seconds with short flash durations that help you stop every gesture, an attribute which is extremely valuable when working with kinetic subjects like dancers or athletes. The included UV color-corrected flash tube renders accurate skin tones and prevents blue from creeping in to the color balance.

Convenience features include a test button, optical slave and integral handle.

The PL625DRC comes with a 7.5" reflector and is compatible with a wide range of optional accessories including grids, snoots, parabolic reflectors, wireless IR triggering and control units.

6 Stop Power Range    120V    Fast Recycling: 1.25 Sec. @ Full Power    Proportional Modeling Light    Photocell Slave    Color Corrected UV Flash Tube    Flash Duration 1/2,000 Sec.@ Full Power    Fan Cooled    Digital Readout Monolight    Includes 7.5" Reflector

Power settings Power levels are diplayed in easy-to-read LED digits allowing settings from 7.8W/s to 250W/s in 1/10 or 1/2 stop increments

The PL625DRC recycles to full power in only 1.25 seconds to catch even the most fleeting gestures

The PL625DRC can take up to 250W quartz modeling lamps with independent power control that are adjustable from full to 1/32 power in 1/10 or 1/2 stop increments. It can be set to Proportional, to pre-visualize the lighting effects, to Manual adjustment or Full On or Off.

Digital cameras can be used with Photogenic PowerLights without fear of damage to the electronics

Highly sensitive, switchable optical slave for synchronization with other flashes

No tools are required to replace this "plug & play" flashtube

Dims the modeling light while charging the capacitors. When the capacitors are at 100%, the modeling lamp re-lights

When reducing the power output, excess flash power in the capacitors is released before exposure to insure consistent performance

A low noise, high performance fan keeps the flash head's electronics cool while lengthening the fash tube's and the modeling light's lives

The PL625DRC incorporates surge protection to handle power spikes and internal thermal protection which monitors heat generated during intense use

The PL625DRC is compatible with all Photogenic Quick-Change light shaping accessories

The PL625DRC's UV-coated, color-corrected flash tube renders accurate flesh tones and removes blue from the color balance. Wedding shooters will appreciate the resulting neutral rendition in the bride's gown

Related Questions and Answers

Q: 1. Will magnetic snap-on attachments (diffuser dome, Clic grids, Clic gels) for the A1 and A1x fit the A2?

A: Yes the Profoto Clic light modifiers that normally work on the A1 and the A1X can also work on the Profoto A2.

Q: 2. Can the beam angle be changed like on the A10?

A: No, The Profoto Clic Fresnel is needed in order to enable a angle beam of light to 34 degrees. Profoto Clic Fresnel BH #PR101310 • MFR #101310 https://www.bhphotovideo.com/c/product/1767393-REG/profoto_101310_clic_fresnel.html?sts=pi

Q: 3. The price is pre tax

A: The pricing for the items on our site is before any applicable taxes. For a price quote, please email us directly at sales@bhphoto.com with the item number you wish to purchase, billing and shipping information, as well as a contact phone number.

Q: 4. What is the best trigger to use with this monolight?

A: Geekoto TTL Flash Commander is available

Q: 5. I want to purchase a spare modeling light bulb (not strobe tube) for the Profoto D2 1000 AirTTL Monolight. What exact bulb does this monolight require? Perhaps someone can send me a link to purchase the bulb? Thanks friends!- Chris

A: The Eiko DRA Lamp (300W/120V), B&H # EI64514, or the Hensel Modeling Lamp for Integra Monolights - 300 Watts/120 Volts, B&H # HEMLI, would work as a modeling lamp for use in the Profoto D2 1000Ws AirTTL Monolight.

Q: 6. Can the Profoto D2 1000 Air TTL be connected to an external power pack, and if so what type?

A: The Profoto D2 1000Ws AirTTL Monolight is designed for AC power usage. If you wish to use the strobe on location, you would need to purchase a power inverter strong enough to handle the above strobe. As a recommendation, I would recommend either the Photogenic Ion Lithium-ion Pure Sine Wave Inverter System, B&H # PHION, which should give you approximately 360 flashes per charge with approximately 7.5 second recycling time, or the Hensel Power Max L Lithium Mobile Power Supply (120VAC), B&H # HEPML120, which should give you approximately 220 flashes on a single charge with the recycling time 50% longer than your current recycling time when plugged into a standard AC household outlet.

Q: 7. Can this light be controlled from the desktop App when using the Connect Pro remote?

A: The ConnectPro allows for viewing the settings on an iPad, iPhone or Android device.

Q: 8. How long does the battery last if I plan to use continuous light for video?

A: The following unit only offers a 2.1 watt modeling light which we would not suggest for video use.

Q: 9. Will the original battery from the Profoto A1work with the new Profoto A2?

A: You can use the same batteries in the A series including the A1 flash.

Q: 10. I saw the profoto d2 custom picture . Is the handle broken ?

A: No. That is the design on the unique strobe unit.