The CA744INLTA3 Dual TA3F to Dual TA3F Channel 3/4 Input Cable for 744T (48") from Remote Audio is an audio input cable designed to be used with line level signals for input channels 3 and 4 on the Sound Devices 744T digital field recorder. The cable is 48" long and has a pair of TA3F connectors at each end. The connectors are color-coded for easy management.

Designed for the Sound Devices 744T Recorder

Allows you to send line level audio signals to input channels 3 and 4 on the Sound Devices 744T digital field recorder

Overall length of 48"

Has a pair of TA3F connectors at each end. The connectors are color-coded for easy management

Related Questions and Answers

Q: 1. Can I mount a Speedlight flash and a Canon GPS receiver at the same time? Struggling to find solution to use GPS receiver and flash on my new R5.

A: You can add a TTL flash one side and a GPS. But the GPS also needs to be attached to the camera via a usb cord. One of the shoes cannot be used to send information to the camera.

Q: 2. Will this be compatible with a Canon EVF-DC2?

A: That is a good question and its perfectly feasible. I believe it would work but we are unable to verify it. You can try it and see, if not we do have a 30 day return.

Q: 3. Does the Canon WL-D89 Wireless Controller work with the Canon XA70?

A: Unfortunately, the Canon XA70 does not support wireless remote controllers. However, there are wired controllers for controlling camera functions like Zoom/Focus and camera start and stop recording. Two supported wired remotes are - Canon RC-V100 Remote Controller BH #CARCV100 https://bhpho.to/3DhRHJo Libec ZFC-L LANC Zoom and Focus Control for Select Sony/Canon Cameras BH #LIZFCL https://bhpho.to/3JmAlPk Extension cable - VariZoom LANC Zoom Lens Control Extension Cable https://bhpho.to/3WBfgnb

Q: 4. Can this camera output from the HDMI and SDI connections simultaneously?

A: The Canon XA75 will not output signals to the SDI OUT terminal and HDMI OUT terminal simultaneously.

Q: 5. Will this work with a Camranger 2 and a Godox Flash trigger?

A: This would work with both a flash trigger and the CamRanger 2.

Q: 6. Is the mic holder independently detachable, leaving the handle and xlr assembly intact?

A: Yes, the cameras top handle, and also the mic holder can be removed from the Canon XA70 camcorder. The mic holder can be removed alone from the XLR unit without removing the top handle as well.

Q: 7. I see that you can record 4:2:2 10 bit externally. Do you just plug in a powered and formatted external HD to do this?

A: To record 10-bit 4:2:2 on the Canon XA70 UHD 4K30 Camcorder with Dual-Pixel Autofocus, you must connect the camera via HDMI to a external recording monitor that can ingest a 10-bit 4:2:2 signal.

Q: 8. I've heard that the two oghts have to be set to the same power output. is that true? Can one of the lights be at 500 ws and the other dialed down to 200ws?

A: The light has full asymmetry, so you can adjust either side to what ever power you would like.

Q: 9. Is it going to have a Sony version?

A: Currently only Canon and Nikon

Q: 10. How long does a battery last?

A: The Jupio BP-828 Lithium-Ion Battery pack will give a end-user a 2.5 to 3 hr runtime.