The beige Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity and LEMO 3-Pin Connector for Zaxcom Transmitters is a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a 3-pin LEMO connector and is wired for use with Zaxcom transmitters. A metal windscreen, holder clip, rubber mount, and plastic case are included.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Zaxcom Transmitters with LEMO    Normal Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size Is Easy to Conceal    Requires 3 to 10 VDC    Includes Windscreen, Mount & Clip

• Zaxcom: Works with Zaxcom bodypack transmitters and recorders equipped with a LEMO 3-pin connector, including the TRX900, TRXLA2, TRXLT2, and more.
• Also works with third-party wireless transmitters and portable audio recorders that are equipped to supply 3 to 10 VDC through a 3-pin LEMO connector wired for Zaxcom compatibility.

Related Questions and Answers

Q: 1. Is this 50 mm macro lens a good lense to photograph art work?

A: Macro lenses like these are very sharp, en should be excellent for your purpose. The only question would be if the focus plane is flat enough (whether everything the same distance from the lens is sharp across the whole frame), but using a smaller aperture like f8 should solve that problem, if it indeed exists.

Q: 2. Weight of z50

A: 13.93 oz

Q: 3. Does this 50 mm macro lens work on the Pentax k-m?

A: I don't see why not. All Pentax lenses without a screw mount are compatible with Pentax bodies. I use old lenses which I used for old SLR s with my new Pentax k-3.Ruthie

Q: 4. Do each of the two lenses come with a front and rear lens cap? Nikon LC-46B 46mm Nikon LC-62B 62mm Nikon LF-N1

A: Yes the Nikon Z50 Mirrorless Camera with 16-50mm and 50-250mm Lenses comes with front and back lens caps for both lenses.

Q: 5. Does he Z50 have infra red mode and monochrome?

A: While this camera does not have infrared modes, you can put it in Monochrome through it's Picture control options.

Q: 6. Does the Z50 allow for bbf?

A: Hi--the Z50 has back button focus capability.

Q: 7. What is the depth of the camera with the 16-50mm lens installed?

A: The dimension of the Nikon Z50 Mirrorless Camera with 16-50mm Lens from the back of the camera to the front of the lens is approxemelty, 3.62 inches. The full dimensions are 4.98 inches wide x 3.68 inches tall x 3.62 inches deep.

Q: 8. Can I clean the sensor with any cleaning kit, or needs to be done with some special nikon kit?

A: Nikon does not produce a sensor cleaning kit. You need to get a kit designed to clean APS-C size sensors.The VisibleDust EZ Sensor Cleaning Kit PLUS with Sensor Clean, 5 Green 1.6x Vswabs and Sensor Brush is a good option. Here is the link: https://bhpho.to/31okQme

Q: 9. Is there a bracket available for the Z50 to use on a tripod without interfering with the FTZ adaptor?

A: The SmallRig Vlogging Mounting Plate for Nikon Z 50 Camera, BH # SMLCN2525 would be a bracket you can use along with the FTZ adapter. https://bhpho.to/37fFghG

Q: 10. Does this come with a battery and a charger?

A: Yes, all Nikon Mirrorless cameras are provided with original charger (Nikon MH-32 Battery Charger), and the original battery (Nikon EN-EL25 Rechargeable Lithium-Ion Battery (7.6V, 1120mAh) in the camera box.