Sightmark H840 Triple Duty Tactical Flashlight Kit
- Product Code: ga260894
-
The Sightmark H840 Triple Duty Tactical Flashlight Kit provides the powerful illumination you need for after-dark hunting, law enforcement and tactical acvitity – along with the ability to customize the color of the light to suit your needs. This 840-lumen aluminum light comes with a mount for Picatinny and Weaver rails and red, green and blue filters to help you be at your most effective in low-light situations. You can operate the light on a momentary and constant-on basis via the push-button tailcap switch, or for momentary use with the included remote pressure switch. Wet weather won't be a problem – the H840 is IP67-rated, capable of being submerged 3.3' deep with no effect on its performance.
840 Lumens Three Cree Q5 LEDs Picatinny/Weaver Mount Red, Blue & Green Filters Tailcap Push-Button & Remote Switches Momentary and Constant-On Modes IP67-Rated, Submersible to 3.3' Type-II Anodized Aluminum Housing
Flashlight | |
---|---|
Illumination Source | 3x White LEDs (Blue/Green/Red Filters Included) |
Lumen Output | 840 Lumens |
Environmental | |
Environmental Resistance | Dust/Water-Resistant (IP67) |
General | |
Battery | 4x CR123A • 1.5-Hour Runtime |
Material | Aluminum |
Dimensions | Length: 8.5" / 21.5 cm Bezel Diameter: 2.3" / 5.8 cm Body Diameter: 1" / 2.5 cm |
Weight | 12.1 oz / 343.0 g |
Packaging Info | |
Package Weight | 1.85 lb |
Box Dimensions (LxWxH) | 9.8 x 5.9 x 2.9" |
- Output: 840 lumens
- Three Cree Q5 LEDs
- Red filter for preserving night-acclimated vision
- Green filter for map-reading
- Blue filter for following blood trails
- Two-stage tailcap push-button switch for momentary & constant-on activation
- Remote pressure switch for momentary activation
- Type II anodized aluminum housing
- Corrosion and scratch resistant
- IP67-rated, submersible to 3.3'
- Mount for Picatinny & Weaver rails
- Bezel diameter: 2.3"
- Body diameter" 1"
- Length: 8.5"
- Weight: 12.1 ounces
Related Questions and Answers
Q: 1. Will this work with a Cannon 5ad Mark iii?
A: Yes, the Oben AT-3565 aluminum travel tripod has a 20lbs payload support and would make a great fit for the camera mentioned.
Q: 2. What is the size of the ball on the rth-1030?
A: Robus RTH-1030 Triple Action Ball Head base diameter is 2 inches while it's height is 3.9 inches.
Q: 3. how much does the monopad from oben at-3586 weight?
A: The monopod with the ball head weighs 2.25lbs.
Q: 4. What Nodal Rail will fit the RTH-1030. Is Nodal Rail from Really Right Stuff MPR-CL 5.7 or the Acratech Nodal Rail an ok fit?
A: Yes, both the RRS and the Acratech will fit the Robus RTH-1030 Triple Action Ball Head. Both of those rails are arca compatible and will work with the Robus that is also arca. Main thing you want to look for is how long the lens you are using. You want a rail that is similar to the length of your lens and camera. If the rail is much longer it may appear in the photo if you are using a wider angle lens. If the rail is too small you might not be able to place the center of the lens over the center of the tripod.
Q: 5. what are the differences between the be-217T and the bz-217T ball head?
A: The BZ-217T features a dedicated adjustable tension knob, the BE-217T does not. Otherwise these ballheads are very similar.
Q: 6. Does the ronin s plate fit this tripod?
A: The plate included with the DJI Ronin S will not fit the ball head of this Oben tripod.
Q: 7. Can this ball head be used on a monopod?
A: Yes, it will mount to a 3/8"-16 screw on a monopod without issue, although it's typically not recommended.
Q: 8. One of the comments mentions that the bag is a tad too small and makes it cumbersome to fit as well as take out the tripod. Is there a slightly large bag in B&H? Thank you...
A: Another bag option would be the Ruggard Padded Tripod / Light Stand Case (22"), BH #RUBP20222 https://bhpho.to/2FJw9dJ
Q: 9. Is the RTH-1050 compatible with the Robus CC-001 Center Column?
A: Yes. The Robus RTH-1050 Triple Action Ball Head is compatible with the Robus CC-001 Center Column for Vantage Series 3 and 5 Carbon Fiber Tripods.
Q: 10. Can the spike feet be removed and replaced?
A: The spike feet on the Oben AT-3565 Aluminum Travel Tripod and BZ-217T Triple-Action Ball Head are not removable.
Top Bestselling Products
Airturn Bite Switch Mouth-activated Momentary Switch
$147.00 $195.51
Pro Co Sound Short Stop - Passive Momentary Switch
$367.50 $551.25
Boss Fs-5u Momentary Footswitch
$140.97 $183.26
Boss Fs-5u Momentary Footswitch
$105.00 $163.80
Radial Engineering Jr1m - Remote Momentary Footswitch
$539.97 $712.76
Elite Screens Yard Master Plus Projector Screen Material (cine White, 145")
$1,093.50 $1,727.73
Tascam Rc-1f Unlatched Momentary Footswitch
$105.00 $165.90
Fenix Flashlight Gl19r Rechargeable Tactical Weaponlight
$267.00 $405.84
Nitecore P12 Led Tactical Pocket Flashlight
$138.00 $218.04
Heliopan 37mm Rg 830 (87c) Infrared Filter
$253.50 $324.48
Products You May Like
Tilta Clamp-on Adapter For Mb-t12 Matte Box (114mm)
$345.00 $472.65
Rycote Stereo Cyclone Ms Kit 6 Windshield System For Neumann Km 120 And Km 140
$2,865.00 $4,383.45
Swissdigital Vacallo 14" Laptop Sleeve (lotus)
$203.97 $277.40
Artisan & Artist Acam-77 Soft Leather Pouch (black)
$449.85 $620.79
Colbor Wonder W60 Bi-color Led Monolight
$387.00 $464.40
Christie Hd Projection Ils 1.1:1/1.2:1 Fixed Lens
$16,485.00 $20,771.10
Nikon Af-s Dx Micro Nikkor 40mm F/2.8g Lens
$830.85 $1,005.33
Countryman E6i Cardioid Ear Set Head-worn Microphone (tan)
$1,889.85 $2,589.09
Hp 16" Zbook Studio G11 Mobile Workstation
$9,617.85 $14,426.77
Really Right Stuff Pt-scout Pan & Tilt Head With Sc-arc Clamp
$1,155.00 $1,778.70
Science Image Rackmount Shelf For Ndi Converters (1 Ru)
$1,380.00 $1,711.20
Tiffen 72mm Uv Protector Wide Angle Mount Filter
$65.40 $96.79
Lascala Optics 4x30 Hamlet Opera Glasses (titanium & Gold)
$207.00 $264.96
2n 01263-001 Induction Loop
$768.00 $1,082.88