The RMv2 Remote Meter for Battery Distribution Systems from Remote Audio provides convenient volt and amp metering for the BDSv3, MEONv2, Hot Strip, and Shunt Box. The RMv2 also acts as an On/Off controller. Unlike its predecessor, which required a separate cable, the RMv2 has an integral 2' cable with a 6-pin Lemo style circular push-pull locking connector that is keyed to be inserted in one way. This provides quick and easy connection to your primary device.

The RMv2 has a clear LCD readout display, and also provides a low battery warning. It includes mounting strips and a removable steel clip so you can mount it for convenient monitoring and on/off control. The unit is easy to use. Simply connect it to your device and flip the toggle switch to "on". Voltage is displayed by default, and you can press and hold the "AMPS" button to display the current draw in Amps.

Compact Design    Volt and Amp Metering    Integral Cable    Low Battery Warning    Mounting Strips and Steel Clip Included

Provides convenient volt and amp metering, plus On/Off control for the BDSv3, MEONv2, Hot Strip, and Shunt Box

The integral 2' cable has a 6-pin Lemo style circular push-pull locking connector that is keyed to be inserted in one way. This provides quick and easy connection to your primary device

The unit has a clear LCD readout display, and also provides a low battery warning

The small size and included mounting strips and removable steel clip allow you to mount the RMv2 for convenient monitoring and on/off control

Voltage is displayed by default, and you can press and hold the "AMPS" button to display the current draw in Amps

Related Questions and Answers

Q: 1. I was wondering if this will work on a Sony HXR-MC2000? This video camera only says remote but does not indicate if it's a LANC connection.

A: I have used the Remote Commander successfully on a Sony HXRNX5U HD camcorder and also on a Canon XA20 HD Camcorder.

Q: 2. Hello will this work with the Sony PXW-X70? If extra cables are needed what are the product codes please. Thanks very much for your time...

A: To use that controller with the PXW-X70 you will need 2 adapters. First you will need a LANC to A/V R Adapter and then an A/V R to Multi Terminal adapter.

Q: 3. Will this fit the R10 camera?

A: No, the Neewer BG-R10 Battery Grip for Canon R5/R6 (Remote Control Kit) will not fit the Canon R10 Mirrorless Camera.

Q: 4. does it support 2nd curtain and high speed sync?

A: While the remote supports high speed sync with Canon DSLR cameras that offer this function, it does not offer 2nd Curtain sync.

Q: 5. Is it compatible with the a7sII and a6300?

A: Yes, it is compatible with both the A7SII and the a6300. Please note that your S1 light may need a firmware update in order to communicate with the Sony remote. You can download the update for free at the Interfit website.

Q: 6. Can I use the the TTL-C remote on a Nikon body (or Sony for that matter) and have it function as a manual remote trigger (giving me the same functionality as if I were using the Interfit S1 Manual Remote)?

A: Interfit makes a manual for use on any camera https://bhpho.to/2YVoUmY. You can try the Canon version on other cameras, but your results may vary as sometimes the pins can get confused via the conflicting pin arrangements and signals even when in manual mode.

Q: 7. Does this controller allow soft start/stop

A: yes. by applying little or great pressure on the level (left or right) you can vary the speed of the zoom.there is a speed switch on the side that determines the maximum speed the zoom goes.

Q: 8. Will this work with a Sony PXW-X200? If yes, do I need to buy a cable adaptor? Which one? Thanks

A: No, unfortunately it will not. The PXW-X200 does not have a LANC connection it has an 8-pin remote connection.

Q: 9. How do I sync this remote to the Interfit s1? I purchased an Interfit s1 several years ago with this remote, and I recently purchased a second Interfit s1. However, I forgot how to sync the Interfit TTL-N Remote for Nikon. I need intructions.

A: You need to match the channel on the transmitter and all of the flash. The flash can bet set to groups as you like.

Q: 10. Will this work for SonyDSR P150?

A: I would not know the answer.