The ZEISS Interchangeable Mount Set MFT for T2.1/50/T2.1 Lens is used to mount the Cine Prime CP.2 50/T2.1 or 85/T2.1 lenses on Micro 4/3-mount cameras.

Mounts CP.2 50 or 85mm Lenses    Mounts on Micro 4/3-mount Cameras

Related Questions and Answers

Q: 1. Will this work with a Panasonic GH5?

A: Yes, this will work on the GH5.

Q: 2. 1.- Does this have user interchangable mounts ? 2.- can you use a follow focus like the Nucleus Nano with the iris wheel? it looks very tiny and narrow

A: It does not have an interchangeable lens mount. You should be able to use a Follow Focus system on the iris ring though..

Q: 3. What are the markings 16 8 4 4 8 16 for?

A: That is the lens's hyperfocal distance scale. Normally only found on manual prime lenses like this, it can be a very useful tool. First determine your aperture and by using the image above of the lens as an example, lets say it is a f/16. The lens focus is set here to 3'6 . Note that the right hand 16 lines up with 10' and the left hand 16 lines up with 2'4 . This is your depth of field with this 10mm lens, with a aperture setting of f/16 and a focus of 3'6 . Your area in focus is 7'8 . Another example, one very good for gimbal work. Move the focus ring until the Infinity (Inf) mark lines up with the right hand aperture of whatever the aperture is be it 4 or 8 or 16. Then look to the corresponding one on the left and note the distance on the focus ring. That means everything from that point to infinity is in focus. No focus pulling needed. This knowledge was the basis of my profession as a camera assistant. Sometimes I would wish all lenses had this much dept of field.

Q: 4. The iris ring has a little bit of drag when rotating compared to others lenses, is that normal?

A: Yes, that sounds normal.

Q: 5. 25mm was NAFTA qualify this one is not NAFTA qualified?thanks

A: It is up to the manufacturer to provide the proper NAFTA paper work regarding an items eligibility.

Q: 6. What is the angle of view?

A: This lens is designed to cover an MFT sized sensors, which is typically a 2.0x crop factor. That means it will have the equivalent of a 20mm field of view.

Q: 7. Is the lens mount user-swappable?

A: This lens is not user-swappable. However, Duclos Lenses offers a professional service to swap the lens mount.

Q: 8. Does this lens come with a lens hood? Shows in photo but not in the list of included stuff.

A: It sure does.

Q: 9. What is minimum focus distance?

A: 2'3" as displayed on the lens focus scales, it goes from 14" to infinity

Q: 10. Is it exactly the slr magic 10mm t2.1 hyperprime lens with the microprime outer body or are they two completely different lenses? I am looking at which one to buy. Thank you.

A: The mechanics for the MicroPrime CINE 10mm T2.1 lens in MFT mount is superior when compared to the HyperPrime as it is designed for professional use. Further, when end users purchase a set of SLR Magic MicroPrime CINE lenses in MFT mount, the position of the gears are the same and they can switch lenses without having to waste time changing the position of the focus gear and the aperture gear on their focus puller. The glass element of SLR Magic HyperPrime CINE 10mm T2.1 lens in mFT mount is the same as the SLR Magic MicroPrime CINE 10mm T2.1 lens in mFT mount.