The Smart-UPS X 1500VA Rack/Tower LCD 230V from APC provides a continuous supply of battery power for connected items in the event of an AC power loss. It also safeguards devices from surges, spikes, lightning, and electrical disturbances. An Automatic Voltage Regulator (AVR) ensures clean and uninterrupted AC power by correcting low and high voltage conditions without using the battery. This UPS features a USB connection that enables configuration and control from a PC. It also features a SmartSlot for integrating it into a network for remote accessibility. Maintenance and servicing can be done from the front of the unit for easy installation and better space management.

This UPS features an intelligent battery management that prolongs battery life by using a charging method based on the battery's age, capacity, temperature, and other factors. An automatic self-test function periodically checks the efficiency of the battery and provides notification when the battery is nearing the end of its usefulness. The system will also notify you if the battery is disconnected. An LED indicator lets you see at a glance power and battery status. The UPS also features an automatic restart function which will automatically power up devices after AC is restored.

1200 Watts    230V Input/Output    RS-232 Control    USB Connectivity    SmartCard Network Integration    Rack Mount Unit (2U Height)    Automatic Voltage Regulation (AVR)    Intelligent Battery Management    Battery Failure Notification

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Enables centralized management via APC InfraStruXure Central.

Provides proactive power and environmental management via web and/or SNMP

Customize UPS capabilities with management cards.

Provides temporary battery power when the utility power is out.

Enables a quick recovery from overload events.

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Warns when a battery is not available to provide backup power.

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatically starts up the connected equipment upon the return of utility power.

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Provides notification of changing utility power and UPS conditions.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Provides management of the UPS via a USB port (not available on all models).

Provides management of the UPS via a serial port.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Gives higher application availability by correcting low and high voltage conditions without using the battery.

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Provides early-warning fault analysis ensuring proactive component replacement.

Related Questions and Answers

Q: 1. Is this compatible with the Blackmagic Micro Cinema Camera?

A: did anyone find some cheap monitor for Black Magic Pocket Camera ?

Q: 2. If I USE the HDMI input, can I send a signal through the sdi output full hd 60p???

A: No, the Viltrox DC70 EX 7" 4K LCD On-Camera Monitor does not support cross conversion. HDMI input signals would only output via HDMI.

Q: 3. There was no Brightness specification of the monitor

A: The manufacturer of the Viltrox DC70 PRO 7" 4K LCD On-Camera Monitor (B&H #VIDC70PRO) does not list a brightness rating in the specifications for it. However, we would estimate it at about 300-400 cd/m² which would make it usable in typical indoor ambient light. That's in the same range as the brightness level of similar monitors at its price level, and also that of a screen of a typical sub-$1,000 laptop PC. Moreover, it could be used for framing a shot outdoors using the included sun hood if bright light is kept from falling directly on the screen.

Q: 4. Does the power button fully power off the unit when on battery to conserve the battery?

A: Yes.

Q: 5. Is it Anti-Glare Screen ?

A: yes it is

Q: 6. What is the size of the barrel power supply plug?

A: Viltrox does not list the barrel size of the DC input of the Viltrox DC70 EX 7" 4K LCD On-Camera Monitor.

Q: 7. this monitor work for Sony FDR ax100 4k ?

A: I have Nikon D810.You have to contact manufacturer

Q: 8. Does it support HDCP?

A: Because the Viltrox DC70 II 7" LCD On-Camera Monitor has no internal recording feature, HDCP compliance is not relevant on such a device.

Q: 9. If i'm shooting 2.0x anamorhic desqueeze and i wan't the monitor to display 16:9 crop image is that possible?

A: Yes, this monitor offers Anamorphic De-Squeezing as a feature.

Q: 10. Does this monitor have a monochrome (B&W) preview mode?

A: I don't see that option in the menu anywhere. I say no it does not.