Muxlab 2 X Cctv Screw Terminal Balun
- Product Code: ga262442
-
The package of two MuxLab 2 x CCTV Screw Terminal Baluns from B&H is designed to transmit CCTV video signals via Cat 3, 5e, or 6 UTP (Unshielded Twisted Pair) cable, eliminating the need for coaxial cable. Providing a hassle-free cabling solution, the baluns connect a wide range of surveillance devices including cameras, IP camera encoders, video switchers, sequencers, multiplexers, DVRs, and camera servers. These baluns can also be used with other composite baseband video equipment such as DVD players, cable boxes, media servers, and audio/video monitors.
Includes 2 CCTV Screw Terminal Baluns Eliminates 75-Ohm Coaxial Cables Transmits Video via Cat3/5e/6 Cables Transmits Color Signals 1200' via Cat3 Transmits Color Signals 2200' via Cat5 Trassmits B&W Signals 1500' via Cat3 Transmits B&W Signals 2500' via Cat5/6 Low Return Loss for Max Power Compact Design for Neat Installation ABS Fire Retardant Plastic Enclosure
Parameters | |
---|---|
Environment | Close-Circuit TV (CCTV) equipment for security and surveillance |
Devices | CCTV cameras, monitors, switchers, sequencers, multiplexers, digital video recorders (DVRs), IP camera servers and other CCTV equipment |
Transmission | Transparent to the user |
Bandwidth | Video: DC to 8 MHz |
Maximum Input | 1.1Vp-p |
Insertion Loss | Less than 2 dB per pair over the frequency range from DC to 8 MHz |
Return Loss | Greater than 15 dB over the frequency range from DC to 8 MHz |
Common Mode Rejection | Greater than 40 dB @ 8 MHz |
Maximum Distance | Color: Cat 3 - 1200' (365m); Cat 5 or higher - 2200' (670m) Shorter distances may be achieved when used with DVRs, typical 1000' (305m) to 1500' (457m) B/W: Cat 3 -1500' (457m); Cat 5/6 - 2500' (762m) |
Cable Requirements | UTP: 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000' (305m) at 1 MHz BNC: Impedance: 75 ohms at 1 MHz (RG59/U) |
Connectors | (reverse polarity sensitive) Two (2) screw terminals |
Impedance | Input: 75 ohms (BNC) Output: 100 ohms (RJ45) |
Temperature | Operating: 32 - 131°F (0 - 55°C) Storage: -4 ~ +185°F (-20 ~ +85°C) Humidity: up to 95% |
Enclosure | ABS fire retardant plastic |
Dimensions | 2.30 x 0.62 x 0.62" (5.8 x 1.57 x 1.57cm) |
Weight | 1.5 oz (42.5g) |
Regulatory | FCC Class A, CE, RoHS |
Packaging Info | |
Package Weight | 0.15 lb |
Box Dimensions (LxWxH) | 6.35 x 4.45 x 0.9" |
Video extender used in pairs
Allows use of Cat3/5/5E cables as a cost-effective alternative to coaxial cables
Transmits color signals up to 1200' (365m) via Cat3; distance can be extended up to 2200' (670m) via Cat5
Transmits black and white signals up to 1500' (457m) via Cat3; distance can be extended up to 2500' (762m) via Cat5/6
2 screw terminals
Made of ABS fire retardant plastic
Compact design - 2.30 x 0.62 x 0.62" (5.8 x 1.57 x 1.57 cm)
Low return loss - ensures maximum power transfer with no line faults
Allows use of Cat5E/6 cables as an alternate to coaxial cables, making changes and additions easier
Meets FCC Class A, CE, and RoHS regulatory standards
Related Questions and Answers
Q: 1. Will this work with the canon c70? If so are the buttons programmable. If not, can you recommend an alternative in this range?
A: No, currently only one remote made available to drive the C70 unit. Canon RC-V100 Remote Controller BH #CARCV100 • MFR #9660B001 https://bhpho.to/42SjET0
Q: 2. Can you purchase an additional receiver with this unit?
A: No, Vello wireless shutterBoss 4.0 remote are sold in kits.
Q: 3. Can you set the bracketing mode EV steps? I read somewhere it's fixed to increasing steps of 1EV, so double the time of the previous trigger? Is there a fixed time between the bracketing triggers, or can you set the delay between brackets?
A: When using the Exposure Time Bracketing Mode found in the Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras, the Wireless ShutterBoss will trigger up to seven (7) photos while doubling the exposure time for each shot in the image. Unfortunately, it does not appear you can set the exposure bracketing interval; it will always double the previous exposure time.
Q: 4. Is it compatible with Nikon Z8?
A: The Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras is compatible with the Nikon Z8 Mirrorless camera. You must use the included 2.5mm Sub-Mini Phono to Nikon 10-Pin Shutter Release Cable.
Q: 5. Will this work with a Canon EOS R6?
A: Yes it is compatible!
Q: 6. Can this be used to trigger video on a Panasonic G9 or GX85?
A: The shutter button on the Panasonic GX85 and G9 does start and stop recording if the camera mode dial is set to video mode. So the Vello Shutterboss 4.0 Remote Timer and Trigger for Select Panasonic Cameras can be used to start and stop video recording.
Q: 7. With this work for the Canon 1D X mark IV?
A: The Vello wireless ShutterBoss 4.0 comes with the Canon 3-pin cable which works on Canon DSLRs such as the 1D Mk IV, 5d Mk IV, and 1Dx Mk III.
Q: 8. will this work with a Nikon Z F?
A: No, the Nikon Zf Mirrorless Camera (B&H # NIZF) is not compatible with the Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras.
Q: 9. will this work with a nikon z7?
A: The Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Nikon Cameras is compatible with the Nikon Z7.
Q: 10. Can this trigger flash
A: The Vello Wireless ShutterBoss 4.0 Remote Timer and Trigger for Select Sony Multi-Terminal Cameras is a shutter release only--he can't trigger a flash.
Top Bestselling Products
Canare Male To Right Angle Male Hd-sdi Video Cable (red, 6")
$68.85 $110.16
Panavise 6" Pass Thru Standard Mount (black)
$63.30 $79.12
2n Ip Force 1-button Intercom System With Camera And Keypad
$4,713.00 $6,786.72
Hanwha Vision Wisenet X Series Xnz-6320a 2mp Indoor Network Box Camera
$2,699.85 $3,266.82
Muxlab Longreach Cctv Ip Poe Extender Kit For 15.4w Camera
$1,121.85 $1,548.15
Manfrotto Ezybounce Bounce Card
$104.64 $147.54
Muxlab 500009 Cctv Screw Terminal Balun
$47.85 $76.08
Muxlab 500024 Cctv Power-thru Balun
$44.85 $53.82
Axis Communications Tu1002-ve Microphone Kit
$477.00 $615.33
Genaray Light Seeker Remote
$104.85 $150.98
Avmatrix Shark S6 6-channel Hdmi/sdi Video Switcher
$2,997.00 $3,776.22
Lumens 4k Ip Ptz Video Camera With 30x Optical Zoom (black)
$7,347.00 $10,947.03
Products You May Like
Lensless Pinhole Body Cap For Nikon F
$87.00 $121.80
Epson Elpsp02 Active Speakers
$567.00 $680.40
Aten Dvi Hdbaset-lite Extender Kit
$626.85 $839.98
Samsonite Freeform Large Spinner (amethyst Purple)
$839.97 $1,343.95
Akg Cgn321 Sts Tabletop Cardioid Gooseneck Microphone With Base (11.8")
$954.00 $1,173.42
Gendome 36w Portable Solar Panel Usb-c Charger
$209.97 $327.55
Wandrd Premium Accessory Straps (pair, Dallol Yellow)
$132.00 $209.88
Coast Hp3r Universal Focusing Rechargeable Led Penlight (red)
$159.66 $215.54
Hp 745 Designjet High-capacity Photo Black Ink Cartridge (300ml)
$558.00 $781.20
Astrhori 12mm F/2.8 Fisheye Lens (nikon Z)
$768.00 $1,182.72
Benq Ex2710q 27" 165 Hz Freesync Ips Gaming Monitor (metallic Gray)
$899.97 $1,367.95