The Peerless-AV LCT620AD-G Desktop Dual Monitor Arm Mount will allow you to affix your monitors to your 0.2 to 2.2" thick desktop or countertop by a grommet mount with a number of adjustment options. It provides 22" of extension from the mount, plus 12.6" of height, -90 to 45° of tilt, 180° swivel, and 360° roll adjustments. The mount will support displays up to 29" and 17.8 lb per arm.

Supports Displays up to 29"    Supports Displays up to 17.8 lb per Arm    For Desk or Counter Tops 0.2 to 2.2"    Grommet Mounting Base    Provides 12.6" of Height Adjustment    Provides 22" Extension    Provides -90 to 45° Tilt Adjustment    Provides 180° Swivel Adjustment    Provides 360° Roll Adjustment    TAA Compliant

Articulating arms allow monitors to be adjusted to your preferred position to help reduce eye, back, and neck strain.

Ease of motion provided by bushings at all pivot points.

Compatible with VESA 75 x 75 and 100 x 100mm

Monitors can be positioned 2.0 to 20.5" above the desktop surface measured at the center of the adapter.

Integrated cable management will help keep cables looking neat.

Related Questions and Answers

Q: 1. Would this work with the 27 Dell Ultrasharp Infinity Edge?

A: Not sure I have a Samsung TV mounted on it and the holes line up

Q: 2. is this suitable for non vesa monitors? I have the asus vx279. thanks!

A: That monitor cannot be mounted using this mount.

Q: 3. Will this mount work for a small flat panel tv?

A: Yes, it will work very well, only limited to how sturdy the wall mount is (ie: studs, etc).

Q: 4. Can the monitor move up and down or just side to side?

A: Yes, It does move up and down as well.

Q: 5. Does this mount allow for mounting to a table by drilling bolts through the actual table? I've used single monitor mounts that have the table clams and/or drilling through the table.

A: I am afraid not. The LeviTouch easily attaches to most desks up to 3.5" thick, and only requires 2.5" of mounting depth on the underside. Simply tighten the clamp around the edge of your desk, no tools are required.

Q: 6. Will this mount to the 2019 Apple 32" Pro Display or do I have to order the Apple VESA adapter as well? ---Thanks

A: You do need an Apple Pro Display adapter. The Apple display uses a magnetic mount and the adapter provides the VESA mount. The adapter costs $194!

Q: 7. Will this mount to a standing desk like this one? https://www.bhphotovideo.com/c/product/1364097-REG/luxor_lvlup_pro32_bk_lvlup_pro_32_bk_desk.html

A: TheGabor LeviTouch Dual-Arm Monitor Desktop Mount BH #GADM502 will mount to most standing desks, including our Luxor Two-Tier Pneumatic Standing Desk Converter (Black) BH #LUCVTRPROBK. There is a possibility that the desk will be a bit too rear-heavy, becoming unbalanced when being moved from lower to upper positions. We are not able to physically test this combination. Please note; Load Capacity (desk): 35 lb / 15.9 kg Gabor dual monitor arm: Supports Monitors from 15 to 27" Supports up to 17.6 Pounds per Arm

Q: 8. Will it handle 2 Samsung Odyssey G9s?

A: The Peerless-AV LCT650 can handle a pair of the Samsung 49" Odyssey G9 32:9 240 Hz Curved HDR G-SYNC VA Gaming Monitors BH #SALC49G97TSS .

Q: 9. do this have a keyboard shelf attachment?

A: There is no dedicated keyboard attachment. There is a laptop shelf available though. Model number: ACC328.

Q: 10. will the arms go low enough for the bottom of 24 monitors to touch the desktop?

A: Yes. The extensions have enough articulation for most 24 monitors to touch the desktop.