The Bescor CLC-125 Cigarette Adapter for LED-125 Camera Light powers the Bescor Morning Star LED-125 Camera Light by connecting it to a Bescor battery pack.

One end of the CLC adapter is a 12V barrel connector that plugs into a 12V input port on the LED light. The other end is a cigarette plug that connects into one of three Bescor 12V battery packs -- the HP3, MM7, or NMH54.

The moment the CLC adapter connects the LED light to a battery pack, the LED light stops using the power of any AA batteries that may at the same time be in it. So the AA batteries don't need to be removed in order to be preserved when switching to a battery pack.

The battery packs are carry-on or waist-belt packs, and the CLC adapter is six feet long, so comfort exists when maintaining a connection between a battery pack and the LED light.

Connects LED-125 Light To Battery Pack    Six Feet Long    12V Barrel Connector/Cigarette Plug    Conserves Alt. AA Batteries When In Use

Connects Bescor Morning Star LED-125 camera light to HP3, MM7, or NMH54 Bescor battery packs.

Six feet long.

12V barrel connector on one end and a 12V cigarette plug on the other.

The LED light's alternate AA batteries don't need to be removed to be preserved upon connecting the LED light to a battery pack.

90-Day Repair & Replace Warranty.

Related Questions and Answers

Q: 1. Is this compatible with: Meade SLR (35mm OR Digital) Camera Adapter for All 7.0 , 8.0 , 10.0 & 12.0 Schmidt-Cassegrain Telescopes - Requires Camera-Specific T-Mount Adapter B&H # METALX ? Mfr # 07352Thanks,- Dave

A: Yes, this Vello T-mount Lens to Sony Alpha adapter will allow you to connect your Sony Alpha DSLR to the Meade SLR camera adapter.

Q: 2. What's the difference between this and the Nikon FTZ adapter?

A: The Viltrox adapter is not supported by Nikon so it is not guaranteed that all lenses will work as well as with a Nikon adapter and also if a firmware in the lens or camera would be updated the Viltrox adapter may not work.

Q: 3. Will this fit a Lumix G9?

A: Lumix G9 has a micro four thirds mount, not Z mount, so Viltrox Nikon F-Mount Lens to Z-Mount Camera Adapter is not compatible with the Lumix G9.

Q: 4. This adapter can use Sony a7 ii body?

A: I use this adapter on a bellows for macro work. Other than needing to realigning it to level the E Mount end of the adapter it has been flawless.

Q: 5. Besides this adapter do I need another item to attach my Sky-Watcher Evostar ED APO 72mm to a Sony emount ?

A: Along with the Vello T-Mount Lens to Sony E-Mount Camera Lens Adapter, one will need to attach the actual tube that goes into the 1.25" eyepiece slot:Celestron T-Mount Adapter https://bhpho.to/3au5qM4

Q: 6. Does it supports AF-S lenses? Like the DX NIKKOR 35mm 1.8

A: Yes, the Viltrox Nikon F-Mount Lens to Z-Mount Camera Adapter accommodates the Nikon AF-S NIKKOR 35mm f/1.8G ED Lens.

Q: 7. Which of the GVM adapters work with the SD200R? The GVM-P80SBOX or the GVM-150BOX? Any third party suggestions?

A: GVM Gvm V-Mount Battery Adapter Plate For Sd200R/Sd200D/Sd200S/Sd300S Led Lights B&H #gvmsdbox

Q: 8. Does this adapter work with Z8?

A: This adapter will work when putting a Nikon F mount lens on the new Nikon Z mount Body

Q: 9. I am confused. This is not a T-adapter but a T-ring to Sony E mount, right ? So I need to buy another T-adapter to attach my Sony A7 camera to the 1.25 focuser of the telescope ?? If this is a T-ring, why is it that long ? The ones for Canon and Nikon are indeed like a ring.

A: You don't need anything else to adapt this to your telescope - the reason why the E-mount version is longer while the Nikon/Canon versions are shorter is because the flange distance between the (Nikon/Canon) mount and sensor are greater due to the mirror.

Q: 10. Can I use a f mount teleconverter with this adapter?

A: Yes, the Viltrox Nikon F-Mount Lens to Z-Mount Camera Adapter can be connected to a Nikon AF-S Teleconverter TC-14E III and a Nikon F-mount telephoto lens.