Attach an offset accessory to your camera's cheeseplate with the Wooden Camera Universal Offset Bracket. This bracket secures to a cheeseplate or other surface that has an ARRI-style accessory mount, a 1/4"-20 thread, or a 3/8"-16 thread using the included screws. The bracket offsets the accessory mount by 3.9" and will accept different separately available accessories and adapters including the Wooden Camera Universal Hot Shoe and Microphone Shock Mount.

Mounts to ARRI-Style Accessory Mount    Also Compatible with 1/4"-20 and 3/8"-16    3.9" Offset

Related Questions and Answers

Q: 1. How many filter trays does it include?

A: Two

Q: 2. Will this mount to a Bolt 6 TX?

A: Yes, the Wooden Camera Offset Mounting Bracket for Teradek Bolt 4K LT TX is also fully compatible across the Bolt 6 ecosystem's TX.

Q: 3. Is there a version that can screw in the RED RF-PL adapter top/bottom brackets to secure the adapter?

A: Wooden Camera does not offer a bracket like the Wooden Camera Side NATO Bracket for RED KOMODO that would also support the RED RF-PL adapter.

Q: 4. I have a Zacuto Pro Baseplate & Amira. The Zacuto riser block doesn't go high enough is there a accessory to make swing away?

A: To convert the Wooden Camera UMB-1 Universal Matte Box (Pro) to a swing-away, you can use the Wooden Camera Swing-Away Arm for UMB-1, B&H # WO202800.

Q: 5. Hi, I plan to buy the Rokinon 16, 35, 50, 85mm Cine DS Lens Bundle for a Blackmagic Micro Cinema (with a speedbooster), for such lenses, do I need a lens support like this at all? Thank you!

A: No I wouldnt use it with those lenses..tend to only use it with 200mm upwards...good bit of gear though that lives setup on a 400mm in my case

Q: 6. Does this only work with the transmitter, or can it be fitted to the receiver as well?

A: This can technically be mounted to any 1/4" 20 thread, but is specifically designed for the Teradek Bolt 4K TX.

Q: 7. I need to replace the very small index screw that comes with this item. It's the one that prevents the microphone or other accessory from sliding out of the cold shoe. Could you provide a link to a replacement screw or at least the size & thread count?

A: The Wooden Camera Universal Hot Shoe (B&H# WO199800) comes with several screws, but the smallest ones are the Wooden Camera ARRI Locating Pin (Set of 2) (B&H# WO900120). See below: https://bhpho.to/3XmATYR

Q: 8. Would there be enough clearance to rig a Sony FX6 stripped down without the side handle?

A: Yes, if you mount the Sony FX6 on the top-most threads, there will be enough clearance for the camera without the side handle.

Q: 9. How much weight can it handle?

A: We imagine that it can easily handle up to 30 lbs, Thus is can take virtually any small camera. Think DSLR and mirrorless. The more likely limitation would be size, not weight. If you have a large camera like a RED or Canon C-series consider this. https://www.bhphotovideo.com/c/product/1464361-REG/wooden_camera_269300_vertical_camera_bracket.html

Q: 10. What is the weight of the matte box in it's different configurations?

A: As you see it, the box the UMB-1 comes in weighs 8.2 lbs / 3.7195 kg. I would say that in in full studio configuration, it would be slightly less than that. In Clamp-On configuration, once you remove the rod holder and not use the metal flags, the stripped down matte box would weigh in the neighborhood of 3-4 lbs / 1.3-1.8 kg.