The DB25-XLR M+F AES/EBU DigiSnake (4-Foot) from Avid is a 4-foot AES/EBU input/output snake that is used to connect external equipment to an Avid HD peripheral (such as the 192 I/O or 96 I/O).

The snake features a DB25 connector to 4 XLR female and 4 XLR male connectors, and is color coded specifically for Pro Tools systems.

4 XLR Female Connectors    4 XLR Male Connectors    Custom Color Coding

DB25 to 4 XLR male and 4 XLR female

Below 192kHz, AES/EBU carries 2 channels per line, so this snake transmits 8 out and 8 in channels of digital audio via the 8 XLR connectors

At 192kHz sample rate, the 192 I/O is using dual wire transmission and this AES snake transmits 4 out and 4 in at 192kHz

Comprised of 110Ω "digital grade" cable

The 4 XLRF wire jackets are yellow, the 4 XLRM jackets are black, all with appropriate labeling

Related Questions and Answers

Q: 1. Does this item have a QD connector mounting point?

A: Yes, the foot has a QD connector port.

Q: 2. Does this fit the new Mzuiko 150-600?

A: The Zenelli LFN Carbon Fiber Lens Foot for Select Nikon Lenses can only be used with select Nikon lenses or Canon lenses depending on the option you select.

Q: 3. Does this fit the newest Nikon 600mm f6.3 VR S lens?

A: Unfortunately, Zenelli Carbon Fiber Lens Foot Plate for Nikon Z is not compatible with the Nikon 600mm f6.3 VR S lens. This Kirk LP-70 Lens Foot does work on the Nikon 600mm f6.3 VR S lens. https://www.bhphotovideo.com/c/product/1595112-REG

Q: 4. What is the string for?

A: The string on the Zenelli LFN Carbon Fiber Lens Foot for Select Nikon Lenses is holding a part on the bottom of the foot so if it will not tip over when not on a tripod. But it slide off. The string prevents it from getting lost.

Q: 5. how strong is the metal to CF bond in this foot? Hate for it to separate carrying 12 founds and $20+K of equipment by the CF foo

A: The Zenelli Carbon Fiber Lens Foot Plate for Nikon Z is extremely sturdy and the metal to CF bond in this foot is inseparable so you can easily carry 12 lb. and $20k worth of equipment by the CF foot.

Q: 6. does the foot you have fit the 500 f4 version 1??

A: Zenelli LFC Carbon Fiber Lens Foot for Select Canon Lenses will fit Canon EF 500mm f/4L IS USM. This item is not compatible with Canon EF 500mm f/4.5L USM.

Q: 7. Does this fit the newest MZuiko 150-600 f5.6-6.3 lens?

A: Although this particular foot was made for Nikon lenses, I went and tried it on the newest OM M.Zuiko 150-600mm lens. Only two of the screws will fit, but it was still really secure. It works fairly well.

Q: 8. How long is the foot where you can carry it where your hand goes?

A: The flat plate part of the Leofoto Lens Foot for Sigma 150-600mm f/5-6.3 S Lens is approximately 3.25" long.

Q: 9. On which Nikon lenses does this lens foot fit?

A: The Photo Clam PCF-N800 Lens Foot for Select Nikon Lenses works with the lenses listed below: NIKKOR AF-S 400mm f/2.8E FL ED VR NIKKOR AF-S 500mm f/4E FL ED VR NIKKOR AF-S 800mm f/5.6 E FL ED VR

Q: 10. Can you confirm if this foot fits the Nikkor 120-300mm f2.8E? It should, but would want to know for sure before ordering.

A: No but this Kirk foot is compatible with the 120-300mm Nikon: https://bhpho.to/3XCyzNm