Dual Channel Wireless Projector

Shure P10t Full-rack Dual-channel Wireless Transmitter (g10: 470 To 542 Mhz)

Product Code: ga263558
Availability: In Stock

$9,780.00 $13,985.40

Qty

0 reviews Write a review

Description
Reviews (0)

The P10T Full-Rack Dual-Channel Wireless Transmitter from Shure is a wireless transmitter for the PSM 1000 system. It can be used to deliver pristine RF signal and audio quality for professional touring applications when paired with Shure P10R or P10R+ wireless diversity bodypack receivers (sold separately) for live stage and theater events or permanent installations.

Built with an all-metal chassis, the dual-channel P10T allows for up to 2 programs to be transmitted simultaneously on different frequency channels. The P10T features balanced 1/4" and XLR connections as well as a 3.5mm headphone jack on the front for monitoring. Its 72 MHz bandwidth offers a wide tuning range to provide stable transmission. Other features include: LCD display, RF mute switch, IR scan with P10R bodypack for RF sync, networked remote control via Wireless Workbench software, and PSM900 backwards compatibility.

For P10R Personal Listening Receivers Dual Channel for Double Program Material 72 MHz Tuning Bandwidth Networkable via Ethernet Wireless Workbench Software Control Switchable RF Output Power All-Metal Chassis Includes Antennas

Specifications
RF Carrier Frequency Range	G10: 470 to 542 MHz
Compatible Frequencies	Per Band: 39
Tuning Bandwidth	72 MHz
Operating Range	300' / 90 m (Environment Dependent)
Frequency Response	35 Hz to 15 kHz (±1 dB)
Signal to Noise Ratio	90 dB (Typical) A-Weighted
Total Harmonic Distortion (THD)	Ref. ±34 kHz Deviation at 1 kHz <0.5% (Typical)
Companding	Patented Shure Audio Reference Companding
Spurious Rejection	Ref. 12 dB SINAD: >80 dB (Typical)
Frequency Stability	±2.5 ppm
MPX Pilot Tone	19 kHz (±0.3 kHz)
Modulation	FM (±34 kHz Deviation at 1 kHz) MPX Stereo Ref.
Operating Temperature	0 to 135°F / -18 to 57°C
Transmitter
RF Output Power	Selectable: 10, 50, 100 mW (+20 dBm)
RF Output Impedance	50 Ohms (typical)
Power Requirement	Input: 100 to 240 VAC, 50/60 Hz, 0.5 A Max (5.5, with Outlet Loaded) Output: 100 to 240 VAC, 50/60 Hz, 5 A Max, Unswitched
Audio Input	Combination XLR-1/4" /6.3 mm TRS
Polarity	XLR: Non-Inverting (Pin 2 Positive with Respect to Pin 3) 1/4" / 6.3 mm: Tip Positive with Respect to Ring
Configuration	Electronically Balanced
Impedance	70.2 Kilohms (Actual)
Nominal Input Level	Switchable: +4 dBu, -10 dBV
Maximum Input Level	+4 dBu: +29.2 dBu -10 dBV: +12.2 dBu
Pin Assignments	XLR: 1=Ground, 2=Hot, 3=Cold 1/4" / 6.3 mm TRS: Tip=Hot, Ring=Cold, Sleeve=Ground
Phantom Power Protection	Up to 60 VDC
Audio Output
Connector Type	1/4" / 6.3 mm TRS
Configuration	Electronically Balanced
Impedance	Connected Directly to Inputs
Physical Characteristics
Dimensions	1.7 x 19.0 x 13.5" / 4.3 x 48.3 x 34.3 cm
Weight	10.4 lb / 4.7 kg
Packaging Info
Package Weight	16.5 lb
Box Dimensions (LxWxH)	27.6 x 17.7 x 3.74"

Full-rack dual-channel transmitter in a professional touring-grade chassis

72 MHz wide tuning range provides flexibility and performance in crowded, unpredictable RF environments

Networkable-over-Ethernet connection to provide comprehensive frequency coordination and transmitter remote control via Wireless Workbench software:
- RF mute enable/disable
- RF output power adjustments
- Aux/line level
- Audio input level
- Channel/device name edit
- Firmware updates

Backwards compatible with PSM900 receivers

RF Mute Switch allows system setup without causing RF interference

Sync RF scan information from a P10R bodypack quickly and easily over IR link

Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments

Spectrum display provides a detailed frequency plot on the menu screen with selectable zoom

Front-panel audio input gain adjustment and LED level meter with clipping indicator

Exceptional transmitter linearity vastly reduces frequency intermodulation, allowing more compatible channels per frequency range

High-contrast LCD with grouped menu items provides an intuitive user interface

Front or back mountable antennas

Compatible with PA421A and PA821A antenna combiners

Loop out connectors for multiple mix setups and easy installation

Switchable +4 dBu and -10 dBV input level

Balanced, 1/4" and XLR connectors

3.5mm headphone out on the front panel for easy monitoring

Related Questions and Answers

Q: 1. will it work with the Canon Speedlite EL-1?

A: This would be compatible with a EL-1.

Q: 2. Do you know if this unit fires other brand compatible speed light flashes that are compatible to canon such as the Photoolex M800C ?

A: This will not work with a Photoolex M800c flash.

Q: 3. This transmitter comes without any instructions. Where can I find a user manual?

A: To obtain a user manual for this item, please contact Impact directly using the following link: http://bit.ly/1g7INv4

Q: 4. Does anyone use this successfully with the Canon 5D Mark IV? I have the original version and it is very buggy with the 5D IV. Can anyone chime in about using this with the 5D Mark IV? Thanks!

A: It works very good with Canon 5D IV

Q: 5. Does the unit tilt or does it only lay flat?

A: The transmitter is in a fixed position.

Q: 6. What is the difference between this unit for $75 and the "standard" unit for $100?

A: We are not aware of another Yongnuo model for $100.

Q: 7. Would this work with a canon 430ex rtiii speedlite?

A: Yes this transmitter is compatible with the Canon 430EX III RT.

Q: 8. Will the YN-E3-RT II work with the Canon RP ?

A: To our knowledge, the Canon EOS RP has not been tested with the YN-E3-RT II. Your results may vary.

Q: 9. Does anyone use this successfully with Canon Speedlite 600EX II-RT?

A: I own these and they work well with a Canon 600 EXII-RT. The focus assist is a nice bonus.

Q: 10. Can this trigger speedlights on a light stand at the same time it is triggering Impact monolights?

A: No, it cannot. The Impact VC-500WLXMT Wireless 2.4 GHz Transmitter for VC-500WL Monolight is only designed to trigger the built-in wireless receiver inside the Impact VC-500WL 500Ws Digital Monolight, which is the only strobe unit for which the transmitter is compatible. If you have hot shoe flashes that have built-in optical slaves, they may be triggered once they see the flash output from the monolight, but the Impact wireless transmitter would not be compatible with hot shoe flashes, and Impact does not have radio receivers that are compatible with this transmitter for your needs.

There are no reviews for this product.