The APC Smart-UPS X 2200VA Rack/Tower with LCD (200-240V) offers efficient network power protection to your servers, point-of-sale, routers, switches, hubs, and other network devices. With Automatic Voltage Regulation, the unit offers higher application availability by correcting low and high voltage conditions without utilizing the battery.

With an intelligent battery management, the Smart-UPS X 2200VA Rack/Tower with LCD (200-240V)maximizes battery performance, life, and reliability via precision charging. The unit houses a power condition that offers protection for connected loads from surges, spikes, lightning, and other power disturbances. It boasts of temperature-compensated battery charging capability to enhance battery life by controlling the charge voltage as per battery temperature. Apart from battery failure notification, the Smart-UPS also conducts periodic battery self-test to ensure early detection of a battery that needs to be replaced.

Featuring an automatic self-test, the Smart-UPS automatically starts up the connected equipment upon the return of utility power and restarts loads after it is shutdown. With network manageability, the unit provides remote management over the network. It features audible alarms that actively inform you whether the unit is on battery, the battery is low, or if there is an overload condition.

Through LED status indicators, the Smart-UPS updates you on the unit and power status. In addition to serial connectivity for managing the UPS via a serial port, the unit has USB connectivity that enables you to manage the UPS via a USB port. Hot-swappable batteries ensure clean, uninterrupted power to protect equipment while batteries are being replaced. It comes with resettable circuit breakers for a quick recovery from overloaded events.

With adjustable voltage-transfer points, Smart-UPS widens the input voltage window or tightens the output voltage regulation for maximizing useful battery life. You can also use this equipment for optimal performance in some specific power environments or generator applications. The unit has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Output: 1980W/2200VA    Input: 230V    9x Battery Outlets, 2x Jumpers    8x IEC 320 C13, 1x IEC 320 C19    Recharge Time: 3 Hours    Audible Alarms    SmartSlot, USB    LED/LCD Status Displays    Hot-swappable Batteries    Delivers Battery Powered AC

Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatically starts up the connected equipment upon the return of utility power.

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Warns when a battery is not available to provide backup power.

Provides remote management of the UPS over the network.

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Quickly understand unit and power status with visual indicators.

Provides management of the UPS via a serial port.

Provides management of the UPS via a USB port.

Warns when a battery is not available to provide backup power.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Provides early-warning fault analysis ensuring proactive component replacement.

Enables a quick recovery from overload events.

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Related Questions and Answers

Q: 1. Does it support HDCP?

A: Because the Viltrox DC70 II 7" LCD On-Camera Monitor has no internal recording feature, HDCP compliance is not relevant on such a device.

Q: 2. Does it work on the Sony FX3?

A: Yes, the Metabones Canon EF/EF-S Lens to Sony E Mount T Smart Adapter (Fifth Generation) is compatible on the Sony FX3.

Q: 3. If I USE the HDMI input, can I send a signal through the sdi output full hd 60p???

A: No, the Viltrox DC70 EX 7" 4K LCD On-Camera Monitor does not support cross conversion. HDMI input signals would only output via HDMI.

Q: 4. Will this have autofocus on the a6600 with the sigma 24-50 for video and photo?

A: If you own the Sigma 24-50mm F/4-5.6 UC Lens For Canon EF Mount, the above lens has long been discontinued and is not available for purchase. The lens was discontinued before the Metabones Canon EF/EF-S Lens to Sony E Mount T Smart Adapter (Fifth Generation) was manufactured. The lens is not listed on the Compatibility Chart on Metabones’ website. The best we can recommend would be to purchase the lens adapter and test it on your lens; if it does not work, you would have up to 30 days from the purchase date to return the lens for an exchange or refund.

Q: 5. Does this work with the Canon 400mm f4 DO lens?

A: Yes this will work with the Canon 400 f4 DO lens if you need autofocus in both photo and video. However, if you are just looking for autofocus in photo, the Sigma MC-11 does have better autofocusing performance.

Q: 6. I was told this adaptor does. It work with older lenses. I would like to use my Canon EF 70-200mm f2.8 IS lens with the Sony a9. This is an older lens but works very well. Does anyone know if this adaptor will work with this lens?

A: This works better then all the other adapters , still not perfect as if you wore to use Sony lens , but it will do

Q: 7. Are you sure this has a vectorscope? I couldn't find a mention on the Viltrox website.

A: there is no mention of a vector-scope on this monitor. it does not include a vector-scope

Q: 8. There was no Brightness specification of the monitor

A: The manufacturer of the Viltrox DC70 PRO 7" 4K LCD On-Camera Monitor (B&H #VIDC70PRO) does not list a brightness rating in the specifications for it. However, we would estimate it at about 300-400 cd/m² which would make it usable in typical indoor ambient light. That's in the same range as the brightness level of similar monitors at its price level, and also that of a screen of a typical sub-$1,000 laptop PC. Moreover, it could be used for framing a shot outdoors using the included sun hood if bright light is kept from falling directly on the screen.

Q: 9. What is the IRIS switch on the left hand side for?

A: The switch is an IBIS (in body stabilization) switch and turns IBIS on or off.

Q: 10. Will this work with the Sony A6500?

A: Yes.