You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Rdl Fp-pa18 18 Watt Audio Power Amplifier With Power Supply

Rdl Fp-pa18 18 Watt Audio Power Amplifier With Power Supply
  • Product Code: ga264097
  • Availability: In Stock

$807.18 $1,291.49

The FP-PA18 18 Watt Audio Power Amplifier with Power Supply is a rugged, energy efficient and compact audio amplifier capable of driving a single 8 ohm speaker (or multiple speakers presented at 8 ohms). Its compact size and straightforward features make the FP-PA18 a viable choice for background music applications, paging audio, television audio applications and more.

The amplifier's power output is 18 watts RMS and a single line input accepts balanced and unbalanced signal types. Its input gain dial compensates between balanced and unbalanced signals and an adjustable compressor/limiter controls dynamics that can ultimately lead to peak distortion and noise.

The FP-PA18 features an energy-efficient and eco-friendly sleep mode that deactivates the output stage in the absence of audio signal, consuming less than 1W of mains power while powered. The sleep mode is triggered with an internal digital timer that may be set to activate at 5, 15 and 25 minute settings. Of course all this is in addition to the convenience, great sound and intuitive control the RDL FP-PA18 provides.

18 Watts RMS into 8 Ohms    Single Balanced / Unbalanced Line Input    Single 8 Ohm Output    Built-in Compressor/Limiter    Audio Input Gain Dial    Energy Efficient & Eco Friendly    Energy Saving Sleep Mode    Compact All Metal Construction

Key Specs
Number of Channels1
Amplifier Power Rating8 Ohms:
18 W RMS
Amplifier
Number of Channels1
Amplifier Power Rating8 Ohms:
18 W RMS
Amplifier ClassClass-D
Performance
Frequency Response20 Hz to 20 kHz ±1 dB
Input Impedance10 Kilohms (Balanced)
5 Kilohms (Unbalanced)
SNR< -72 dB
THD+N< 0.5% (Full Range)
Common Mode Rejection Ratio (CMRR)> 45 dB
Signal Processing
CompressorYes
Power
AC Input Power100 to 240 VAC, 50 / 60 Hz
Current Consumption16 mA (Idle)
975 mA (Max)
Power Consumption1 W (Standby)
Physical
Display & IndicatorsRed LED (Compressor)
Green LED (Output/Signal)
Blue LED (Power)
Operating Conditions32 to 122°F / 0 to 50°C 
Dimensions1.1 x 3.2 x 3.0" / 2.9 x 8.3 x 7.6 cm
Packaging Info
Package Weight1 lb
Box Dimensions (LxWxH)7.1 x 5.1 x 2.3"

18 watts RMS into 8 Ω

Automatic energy‑saving sleep mode

Selectable sleep delay: off, 5, 15, 25 minutes

Input / output detachable terminal block connections

Line level balanced or unbalanced input

Compressor/limiter controls clipping

LED to indicate audio compression threshold

Compressor produces maximized average output power

Audio quality superior to standard amplifiers

Ultra‑compact all metal construction

High‑efficiency class D operation

Thermal and short-circuit protection

Related Questions and Answers

Q: 1. Is there a cable for connecting this battery pack to the TT685 speedlight?

A: This flash is not compatible with external packs.

Q: 2. can we be able to balance canon m50 in weebill s?

A: Yes, you will be able to balance a Canon M50 Mark II with the Weebill Lab S.

Q: 3. What is the recycle time ?

A: Around one second,

Q: 4. will this work with Godox VING V860IIF TTL Li-Ion Flash Kit for Fujifilm Cameras B&H # GOV860IIF MFR # V860II F/FUJIFILM KIT ?

A: Yes, use a canon CZ cord

Q: 5. What is the output spec of the charger?

A: The output of this charger is 12V, 1.5 amps.

Q: 6. Does this system have a time lapse function with a Sony camera?

A: Yes, this gimbal does offer a Time Lapse function through the ZY Play App.

Q: 7. what cable do I need to go from power pack to flash

A: Joe, there are specific cords manufactured for different flash guns. I am using mine with a Godox 360 bare bulb flash and I also have a cable for a Nikon SB910 flash. If you contact B & H by phone they should be able to direct you to the proper flash cord.

Q: 8. I have the Cheetah Lithium 4500 since December 2015. used for many, many events. I now have the new Canon 600EX 11 and at my event the cord kept coming out. Then I had sparks and smoke. I was told this battery would replace what I have. I just cannot figure out what cable or if this will work with new canon flash? Ideas?

A: This battery is compatible with the Canon 600EX II RT using the Bolt CZ2 HV Locking Flash Power Cable for Select Canon Flash Units B&H # BOCZ2.

Q: 9. will this support the canon 90d with the sigma 17-70mm and the sigma 17-50mm?

A: Yes it will

Q: 10. Is there enough adjustment range up/down to compensate for having a Sony wireless audio receiver in the camera hot shoe of the a7iii? The Ronin-S have no problem with this and it even works with some of the earlier Zhiyun gimbals. From all the pictures it seems like it is already almost at the bottom of the adjustment of this axis just with the camera som it seems like there is no room to put anything, even a shotgun mic on top of the camera. Anyone that can test this out? If it can do this it seems like the perfect gimbal.

A: This really is something that would need to be tested out to see the results. We do offer handles to attach accessories that may be a better approach. https://www.bhphotovideo.com/c/product/1484507-REG/smallrig_bss2222b_wooden_side_handle_for.html

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Qnap 250w Single Power Supply

$945.00 $1,219.05

2n Ip Audio Power Supply

$234.00 $355.68

Nila Varsa V2 Deluxe Bi-color Kit

$9,597.00 $14,299.53

Remote Audio 12v, 5 Amp Power Supply

$318.00 $445.20

Grimm Audio Mp1 Power Supply For Tube Microphone

$4,650.00 $6,417.00

Logitech Casa Pop-up Desk (classic Chic)

$539.97 $820.75

Products You May Like

Tiffen 3 X 3" 2 Sepia Solid Color Filter

$401.85 $638.94