Whether shooting in the studio or outdoors, the Vello RS-P1II Wired Remote Switch provides photographers using select Panasonic and Leica cameras with a simple way to control exposures and create more "keepers". The device has a thick, sturdy cord and is larger and more comfortable to use than many other remote devices.

The RS-P1II is compatible with autofocusing, continuous shooting, single image capture, and long exposures. It will autofocus with a half press of the button and trigger the shutter with a full press. Also, users can press the button and slide it forward to lock it for long exposures. It can be used with cameras that feature live-view mode. Since exposures can be triggered without touching the camera, sharp, blur-free images are captured. The RS-P1II does not require batteries as it operates on the camera's power, making it an extremely useful tool to keep in your studio or gear bag.

Control Autofocus and Shutter Triggering    Capture Images without Camera Shake    Optimal for Long Exposure Shooting    Use for Continuous or Single Exposures    No Battery Required    Large, Comfortable Form Factor

Panasonic: DC-S1H, DC-S1R, DC-S1, DC-S5, DC-GH6, DC-GH5 II, DMC-GH5S, DMC-GH5, DMC-GH4, DMC-GH3, DMC-GH2, DMC-GH1, DC-G95, DMC-G9, DMC-G8, DMC-G7, DMC-G6, DMC-G5, DMC-G3, DMC-G2, DMC-G85, DMC-G10, DMC-G1, DMC-GX8, DMC-GX7, DMC-GX1, DMC-L10, DMC-L1, DMC-GF1, DMC-FZ2500, DMC-FZ1000, DMC-FZ300, DMC-FZ200, DMC-FZ150, DMC-FZ100
Leica: V-Lux 4

Related Questions and Answers

Q: 1. Does this work with the Nikon D100?

A: In order to use the Vello FreeWave Plus Wireless Remote Shutter Release for Nikon (or any remote shutter release with the Nikon 10-pin connection) with the D100 you would need to have the MB-D100 Multi Function battery pack. The battery pack would have the 10-pin accessory port needed to use a remote shutter release with the D100.

Q: 2. Does this use the 2.5mm jack or micro USB to connect to a fuji camera? I want to use with X-T3 (USB-C)..so I need to use 2.5mm. Vello receiver appears to use a 2.5mm. _ So i think i need a 2.5mm to 2.5mm cable. The pictured cable is a 2.5mm/micro USB.

A: The RWII-F1K Vello FreeWave Plus kit includes the 2.5 to Micro USB cable that is not compatible with the FUJIFILM X-T3 camera. The RCC-C1-2.5 cable is compatible with your FUJIFILM X-T3 Mirrorless Digital Camera. Please check out this Vello FreeWave Plus Wireless Remote Shutter Release for Canon. Yes, you are correct, you do need a 2.5mm to 2.5mm cable The Freewave Plus for Canon includes the cable that you need for your X-T3: https://www.bhphotovideo.com/c/product/753841-REG/Vello_RWII_C_FreeWave_Plus_Wireless_Remote.html

Q: 3. Does this work with the Sony a7riii. I had the shutterboss and it only worked in 2 second timer delay and not song drive mode?

A: Yes I just bought it and the a7riii. It works in all modes and in bulb you dont have to hold it down

Q: 4. How to setup with Canon 3Ti? The Cable that came with the product only fit in the receiver, but the other point fits only in the headphone jack, I'm assuming is the wrong cable?

A: Assuming the T3i is like the T4i (looking at the pictures, it is very similar), there are two pop out sections on the left side of the camera body. The front one has to plug-in ports - one for the Microphone, the other (top) is for a remote control such as this one. Once you plug it in to that port, the wireless remote will work just fine. Also, when I got this Shutter Release, it came with 2 cables - one works w/ my T4i, the other works well with my 5D, make sure you have the correct cable.

Q: 5. can I use it to focus when taking videos by half pressing the power button remotely? Nikon D5100 Thanks in advance!

A: Yes, works like the on-camera button

Q: 6. Does it work with a D3300 ? Thank you

A: I would like to give an answer, but I don't have knowledge that applies. Sorry.

Q: 7. Is this compatible with EOS R?

A: Yes, it is compatible with the EOS R.

Q: 8. Will this work with Sony alpha A9?

A: You need to buy the Nikon specific one. They come in models for each camera. I have Canon, but they make for Nikon too. I love love it. It allows me to walk around to get children to smile and it has allowed me to be in big family portraits with up to 20 people with no interference. I like it a lot.

Q: 9. Does this work with Canon R5 ?

A: It is compatible with the Canon R5 camera.

Q: 10. What cable do you use to connect to a Canon rebel T3? My camera does not have the 3 pin connector, it has remote, micro USB and HDMI. I assume it connects to the remote connection but does that allow full functionality, single pic, multiple pic, bulb etc

A: The Vello FreeWave Plus Wireless Remote Shutter Release - 2.4GHz (for Canon) comes with both the cable for the Canon cameras with the 3-pin connection, and the cable for cameras with the sub-mini connection, such as the Canon T3. That cable would connect to the cameras remote control terminal. It would allow for full functionality.