The Ewa-Marine D-B Underwater Housing For Mirrorless Cameras is a durable PVC case with an optically neutral flat glass port. It is designed for the compact MFT / Micro-Four-Thirds and other mirrorless SLR or CSC / Compact-System-Cameras and lenses. The housing is compatible with lenses from 0.8-2.8" (2.0-7.0cm) in length, with a maximum diameter of 2.6" (6.5cm) and a maximum filter thread of 62mm. Great for use on small boats, in the surf, and while swimming, snorkeling or diving, the case makes camera operation simple: Controls and buttons can be manipulated through the PVC. The housing even features a special finger-"glove" enabling easy access to the camera's shutter button and finger tip control. The housing has a depth rating of 98.4' (30 m).

Inside the case, the camera's auto focus and flash continue to function optimally. The specially-designed section at the top of the housing accommodates the flip-up, internal flash found on certain camera models, enabling use of the flash both above and below the water's surface.

As you descend beneath the surface, air gets pressed into the camera. As a result, the pressure inside the housing remains the same as the surrounding water pressure, making implosions virtually impossible. Be sure to start your dive with sufficient air inside the housing. The supplied foam pads are part of this air "reservoir" and extra air should also be blown into the housing, via the rear valve, in order to ensure that the maximum potential volume is used.

The housing features a pair of non-corrosive, seawater-resistant clamping rails, which fit together for an ideal seal. They are tightened via 3 screw knobs. The case is supplied inside a handy yellow carry case with a waterproof interior and a zippered side pocket.

Depth Rating: 98.4' (30 m)    Camera Controls And Buttons Accessible    Special Finger-Glove For Access    Auto Focus And Flash Function Optimally    Optically Neutral Flat Glass Port    Double Laminated PVC Construction    Seawater-Resistant Clamping Rail Closure    Carry Case With Waterproof Interior    Designed For Micro-Four-Thirds/ SLR/ CSC

Depth rating of 98.4' (30 m)

Camera controls and buttons can be manipulated through the PVC. The housing even features a special finger-"glove" enabling easy access to the camera's shutter button and finger tip control

Inside the case, auto focus and flash continue to function optimally. The specially-designed section at the top of the housing accommodates the flip-up, internal flash found on certain camera models, enabling use of the flash both above and below the water's surface

Constructed from double laminated PVC. Features an integrated, optically neutral flat glass port

Great for use on small boats, in the surf, and while swimming, snorkeling or diving

As you descend beneath the surface, air gets pressed into the camera. As a result, the pressure inside the housing remains the same as the surrounding water pressure, making implosions virtually impossible. Be sure to start your dive with sufficient air inside the housing. The supplied foam pads are part of this air "reservoir" and extra air should also be blown into the housing, via the rear valve, in order to ensure that the maximum potential volume is used

Features a pair of non-corrosive, seawater-resistant clamping rails, which fit together for an ideal seal. They are tightened via 3 screw knobs

Supplied inside a handy yellow carry case with a waterproof interior and a zippered side pocket

Designed for the compact MFT / Micro-Four-Thirds and other mirrorless SLR or CSC / Compact-System-Cameras

Compatible with lenses from 0.8-2.8" (2.0-7.0cm) in length, with a maximum diameter of 2.6" (6.5cm) and a maximum filter thread of 62mm

Related Questions and Answers

Q: 1. Can this be used with a Panasonic HC-X1500 Camcorder?

A: Yes, it can be used with the Panasonic HC-X1500.

Q: 2. Will this fit the Canon Rebel T5?

A: Yes, this cage will fit the Canon Rebel T5.

Q: 3. Will a nikon D500 fit on this one?

A: Yes, the following cage will work made for for DSLR or mirrorless cameras.

Q: 4. will this fit my gx8??

A: Following

Q: 5. Does this flash play nicely with a Z8?

A: The Nissin MG60 Professional Compact Flash for Mirrorless Cameras (Nikon) BH #NINDMG60N is compatible with a Nikon Z8.

Q: 6. What hand grip works for lumix gm1? The distance from the center of screw to edge is 2 3/8".

A: The Panasonic Hand Grip for Select Lumix Mirrorless Cameras is incompatible with the Panasonic Lumix DMC-GM1 Mirrorless Micro Four Thirds Digital Camera.

Q: 7. Will this fit a Canon Rebel T7i?

A: Yes, it will fit the Rebel T7i

Q: 8. Will this flash work with a Leica M10?

A: Unfortunately Nissin MG60 Professional Compact Flash for Mirrorless Cameras (Sony) is not compatible with the Leica M10. The Sony shoe has extra contacts in the front and it won't work with a non Sony camera.

Q: 9. Is this product compatible with a Nikon Coolpix P7100?

A: Yes. The following unit would make a great pair for the Nikon P7100 and take full advantage of its metering system.

Q: 10. The guide number seems insanely powerful. Is it really 656.2' / 200 m at ISO 100?

A: Nissin MG60 Professional Compact Flash for Mirrorless Cameras (Nikon) has a guide number of 60 at 200mm, and a guide number of 28 without zoom cover, 83 watt seconds (at ISO 100). We will be correcting the error under the specs shortly. Thanks for letting us know.