The DVI-to-VGA Converter from Gefen is a small box solution that converts DVI signals onto VGA monitors. This enables digital sources to be connected to analog displays. With resolutions supported up to 1920 x 1200, the DVI-to-VGA Converter detects the connected monitor and determines which extended display identification data (EDID) to use. If the connected display does not have its own EDID, the DVI-to-VGA Converter has its own internal EDID it can use to produce the best possible video output.

EDID Management    Max. 1920 x 1200 Resolution    Digital to Analog Signal Conversion

Extended display identification data (EDID) is a data structure provided by a digital display to describe its capabilities to a video source. It is what enables a modern personal computer to know what types of monitors are connected to it. The DVI-to-VGA Converter will automatically use the EDID of the connected display. If the connected monitor does not have EDID, then the DVI-to-VGA Converter will use its internal EDID to output the most compatible video signal

The DVI-to-VGA Converter supports a DVI-D signal using a DVI-I connector and converts it into a VGA Analog (PC/RGB) signal

The DVI-to-VGA Converter supports resolutions from 800x600 (min) to 1920x1200 (max)

Related Questions and Answers

Q: 1. Can i connect both cameras to a video switcher and use only the program out to connect to the BDM Camera converter?? As we want only the program out to be send to another broadcast room.

A: The Camera Converter is a single camera device used to connect via fiber to the ATEM Studio/Talkback Converter and the ATEM. It is also designed to bring Program video back to the Camera Converter for local monitoring, tally and talkback.

Q: 2. How does this connect to BMD Studio cameras and talkback converter? Can the in/out SDI of camera be connected to this then Fiber in/out of this to talkback converter?

A: Also if you are using the BMD studio cameras you can use either the blackmagic camera convertor that uses fiber or use the blackmagic camera convertor 4K that uses SDI. The BMD studio cameras has the camera convertor built in so you do not need to add this extra piece to the system. You need just the receiving end in either the fiber version or sdi version and both versions will carry signal, talkback, and tally.

Q: 3. Can I connect a BMPCC6K to this via HDMI, with the SDI Out going into the ATEM Talkback Converter 4K (and subsequently to the ATEM Television Studio Pro 4K), the SDI In coming from the converter, and the HDMI out going to a monitor without any hitches?

A: The Camera Converter only connects to the Talkback Converter using dual fiber for full functionality.

Q: 4. What is the difference between the FCON TO1 and the FCON T02. Will both lenses work on the TG-6?

A: The Olympus FCON-T01 Fisheye Converter Lens is made for the TG-1 camera and the Olympus FCON-T02 Fisheye Converter Lens is for the TG-6 model camera.

Q: 5. will it work for Sony a6000 with 16mm fixed focal length f2.8?

A: Yes it will, assuming that you are talking about the Sony SEL16F28 lens.

Q: 6. Will this lens work on the TG7? The conversion lens adapter appears to be the same?

A: Yes, the Olympus FCON-T01 Fisheye Converter Lens is compatible with the OM SYSTEM Tough TG-7 Digital Camera if you also use the Olympus CLA-T01 Conversion Lens Adapter.

Q: 7. Is it compatible with the Hasselblad version?

A: Yes, this converter would also be compatible with the Hasselblad LF 16mm f/2.8 Lens.

Q: 8. is this 4k compatible?

A: No. It is 3G signals up to 1080p60.

Q: 9. Will the Olympus FCON-T01 work with the Tough TG-5?

A: Yes, the Olympus FCON-T01 Fisheye Converter Lens can go on an OM SYSTEM Tough TG-5 Digital Camera utilizing an Olympus CLA-T01 Conversion Lens Adapter.

Q: 10. Can the lens be used by itself without the converter?

A: Yes, the Hasselblad XCD 135mm f/2.8 Lens with X Converter 1.7x can be used by itself without the converter.