The 16x9 Inc. Cine Base M15 Support Base is a part of the camera support setup used to balance the camera when shooting with zoom lenses and other accessories.

The dual lock knobs lock the 15 mm support rods onto the Cine Base; they can also be used to adjust the rods individually for fine tuning. A locking lever with a spring-loaded brake system securely locks the Cine Base onto the compact Dovetail or any industry-standard dovetail rails. On mounting the camera support plate to the Cine Base, a safety lock automatically falls in place and secures the plate to the base. The presence of delrin, a thermoplastic with low friction, on the bottom of the Cine Base allows it to smoothly slide over the dovetail. The Cine Base is made of solid aluminum, which makes it highly durable. The Cine Base is designed to mount onto studio base plates from ARRI or Chrosziel.

Dual Locks for the Support Rods    Secure Base Lock Lever    Safety Lock for the Camera Plate    Delrin-based Bottom for Smooth Sliding    Solid Aluminum Construction    For Use with ARRI and Chrosziel Plates

Cine Base balances cameras with zoom lenses or accessories

Dual knobs lock the support rods and adjust their lengths individually

Spring-loaded brake system secures the Cine Base onto the compact Dovetail or any industry-standard dovetail rails

A safety lock secures the plate to the Cine Base

Cine Base with delrin-based bottom smoothly slides over the dovetail

Solid aluminum construction to withstand tough working environments

Compatible with ARRI and Chrosziel studio base plates

Related Questions and Answers

Q: 1. Can i use the same base plate with Gimble head for my Canon 1Dx Mark II .....?

A: No. This base plate attaches to the bottom of your camera body and will attach your camera body to many types of tripod heads, but not a standard gimbal head. A gimbal head does not have room to attach the camera body and is made to be used with long lenses which typically have a rotating collar with tripod foot. You attach a flat base plate (not this one) to the tripod foot on your lens and that's the plate that attaches to the gimbal head.

Q: 2. Will this work on the Canon 5D IV Battery Grip?

A: No, your best off get the RRS L bracket for the 5d4 and grip, click the link below; https://bhpho.to/397sst0 or there are a variety of grip plates made by other mfrs; https://www.bhphotovideo.com/c/products/camera-plates-l-brackets/ci/38006?filters=fct_camera-compatibility_6438%3Acanon-5d-mark-iv%2Cfct_quick-release-system_7375%3Aarca&searchWithin=grip

Q: 3. Will a BlackRapid FastenR-T1 properly fit and work in place of the supplied 1/4-20 attachment screw?

A: Yes, the BlackRapid Fasten R-T1 can be used.

Q: 4. Does itr work with 5D mark 4?

A: No, this plate is specific to the Nikon D800 series cameras. The following base plate is compatible with the 5D4; https://bhpho.to/39HWZhn

Q: 5. WILL IT FIT INTO ROBUS MONOPOD ?

A: These are the tripods the Sirui P36 Adapter Kit with Tripod Base for P-306 and P-326 Monopods is compatible with: Sirui P-306, Sirui P-326.

Q: 6. Will this plate work properly with the vertical portion from the RRS 1DX Mark II?

A: No, the Really Right Stuff Base Plate for Canon EOS-1D X Mark III would not work with the vertical portion of the Really Right Stuff B1DXMkII-L Set L-Plate for Canon 1D X and 1D X Mark II. The shape of the plate has changed quite a bit, and it would not work.

Q: 7. Would this snap into a Gitzo GH1382QD?

A: Yes, The B5DMkIV Base Plate will fit into the Gitzo 1382QD. They are both "Arca Type" compatible.

Q: 8. would this thread into a leofoto monopod model mp364c ?

A: Being that the Leofoto MP364C Monopod has a removable foot that exposes a 3/8-16" thread, you can use this Sirui Tripod Base with it. However, there are no tests we're aware of that confirm the two can work. The results may vary.

Q: 9. Is this compatible with a Sigma 50-500 Canon EF lens, and what sort of QR plate would I need for such? Also, what sort of microfiber tripods would be usable to have the 500mm in front & my tiny Sony A6000 mounted behind and still be able to balance?

A: The Wimberly WH-200 handles my Nikon super-tele just fine. Don't know what adaptor plates you'll need with a Cannon rig, but I can tell you from experience you should buy the biggest, meanest, strongest tri-pod you can afford for that big lens! Buck Taylor

Q: 10. Does this fit the 1DMark 3 body ?

A: The B1DXMK II will not fit. There is the specific Really Right Stuff Base Plate for Canon EOS-1D X Mark III, BH # CAE1DX3B that can be used. https://bhpho.to/3grNgjt