Protect your point-and-shoot large zoom camera from dirt, dust, and minor bumps with the yellow BodyBag from LensCoat. The BodyBag is constructed from tough, shock-absorbent neoprene, and features a small snap hook that may be attached to your camera. Photographers will appreciate the touch-fastening flap closure and attractive stitching that adds beauty and durability. For added versatility and functionality, the bag has holes at either end for your camera strap. BodyBags are available in a variety of colors, for matching other LensCoat gear or blending into one's surroundings.

Soft, Shock-Absorbing Neoprene    Protects from Dings, Scratches, Dust    Protects from the Elements    Snap Hook Attaches Camera to Case    Touch-Fastened Closure    Heavy Stitching Around the Edges    Suitable for Storage, Travel

• Canon PowerShot S5 IS, SX20 I, G1X, G1 X Mark II, G5X
• Nikon J1, V1, COOLPIX P80
• Point-and-shoot cameras measuring approximately 4.7 x 3.5 x 3"

Related Questions and Answers

Q: 1. With the new Studio 6k Pro announced, are there any EF mount lenses that will work with this?

A: The only EF lenses that are compatible with the Blackmagic Design Zoom Demand on the Blackmagic Design Studio Camera 6K Pro (EF Mount) are the Canon CN-E 18-80mm T4.4 COMPACT-SERVO Cinema Zoom Lens (EF Mount), B&H # CAE1880EF, and the Canon CN-E 70-200mm T4.4 Compact-Servo Cine Zoom Lens (EF Mount), B&H # CAE70200EF, at this time.

Q: 2. Can I control this lens: Fujinon LA16x8BRM with Blackmagic zoom & focus on demand?

A: The Blackmagic Design Focus and Zoom demand will only work with the BM Studio 4k Pro and Plus cameras. The Fujinon LA16x8BRM lens is compatible with the URSA Broadcast and would use the following controls. https://bhpho.to/3BtPYP7 Link to URSA Broadcast kit -https://bhpho.to/353s4hc

Q: 3. Will this work with the Panasonic Leica DG Vario-Elmarit series of lenses?

A: The following unit will work with any MFT lenses with power zoom capability.

Q: 4. Will this work on the Blackmagic Design URSA Broadcast G2 Camera or even the old blackmagic ursa broadcast camera?

A: The Blackmagic Focus Demand will work with the URSA Broadcast G2 and the Studio Camera 4K Pro and Plus models only.

Q: 5. How do you create preset zoom/focus points? I have this controller connected to my BG2 camera and can assign zoom/focus presets to the various function buttons, however I can't fine a way to actually create the preset points.

A: The Blackmagic Design Zoom Demand (B&H# BLZD) has two buttons which may be programmed to particular zoom points. A power zoom B4 or PL lens is needed. A firmware update of your camera may also be necessary. To set a preset, hold one of the side buttons down on the Zoom Demand. You can see a demonstration of that beginning at 17:55 here: https://bit.ly/3CwDsQw

Q: 6. I can't seem to get the zoom to work w BMD Studio+. I have this lens Lumix G X Vario PZ 45-175mm f/4-5.6 ASPH. POWER O.I.S. Lens Zoomplug goes from usb-c port to usb-c on Focus demand. Focus demand goes from cam port to cam port. Using cables that were supplied. Nothing in the menu settings referring to zoom demand. Focus demand seems to work fine I have ssd drive plugged into B port on cam Help?

A: Please attempt to connect the Blackmagic Design Zoom Demand directly to the Blackmagic Design Studio Camera 4K Plus to troubleshoot if the Zoom Demand is functioning. Also, try to connect the Zoom Demand to both USB-C ports on the camera without the SSD drive plugged in and test the Panasonic Lumix G X Vario PZ 45-175mm f/4-5.6 ASPH. POWER O.I.S. Lens zoom toggle on the lens itself, as well as ensure the contacts on the lens are clean.

Q: 7. I HAVE THIS CONNECTED TO MY BMD STUDIO CAMERA 4K PRO. should it at least get a light on the demand letting me know it has been recognized? or should any of the buttons be working? i'm getting nothing. how do i know if it's actually connected? is there a menu option for either of the demands? thanks for any help!

A: It is suggested that you daisy chain the focus and zoom demands with USB-C cables to the BMD Studio Camera. The controls on the Zoom Demand are mappable through the Camera settings. If nothing is happening, double check the camera power and the cables and connections. If still nothing contact B&H Sales.

Q: 8. Will this work with the blackmagic camera app on iPhone allowing start/stop and zoom controls?

A: The Blackmagic Design Zoom Demand must physically connect to the supported camera via USB-C. However, the BMD app does support zoom control as well. The dedicated Zoom demand control will be smoother and more reliable than the app.

Q: 9. Will the Fujinon MCA-7 Mounting Clamp work with this?

A: No. The following system offers its own mounting system.

Q: 10. Will this work with the URSA Broadcast G2 and the Fujinon LA16X8BRM-XB1A 2/3" 4K Pro Lens to control the zoom of the lens?

A: Yes, the Blackmagic Design Zoom Demand will be compatible with the Fujinon LA16X8BRM-XB1A 2/3" 4K Pro Lens.