Create brilliant prints that can be mounted in a variety of locations with this 20-pack of 8.5 x 11" sheets of Adhesive Luster Paper from Inkpress Media. The paper offers a bright white polyethylene-coated paper substrate with an adhesive backing covered by a silicone release liner; this is what allows you to easily place the print on a surface. The paper also has a basis weight of 240 gsm and a thickness of 9.5 mil, when including the adhesive. Additionally, it is fast drying, has a good brightness of 95%, and has a pearl surface finish.

Polyethylene-Coated Paper Substrate    Adhesive Backing with Silicone Liner    Basis Weight: 240 gsm    Thickness: 9.5 mil    Brightness: 95%    Fast Drying    Surface Finish: Pearl

Related Questions and Answers

Q: 1. Does this lens pair with the canon c500 when using a 2/3 mount?

A: Yes, the Fujinon XA20sx8.5BERM-K3 ENG Lens will work perfectly with the following adapter. The B4 lens also has a 2x extender which is a requirement for the adapter. MTF Services Ltd B4 2/3" to Canon EF Adapter BH #MTB4CANEF Compatibility: Arri Alexa, Canon C300 PL, Canon C500 PL, PL mount, Red Epic PL, Red One PL, Red Scarlet PL, Sony F65

Q: 2. I have a bm ursa 4.6k PL. Will this lens work with the CINEURSAMTB4 adapter from blackmagic?

A: Yes, this will be compatible.

Q: 3. can this be controlled with the blackmagic Focus Demand when on an Ursa Broadcast G2 camera?

A: Unfortunately no, the Focus Demand works with Fujinon lenses with the RD suffix in the lens name. Lenses that do not have servo focus built-in will not work with the Focus Demand. However, the LA16x8BRM lens is supported for full Zoom/Focus control from Blackmagic.

Q: 4. What is the cheapest but good zoom and focus controller for this lens?

A: Here is a list of lenses that are compatible with the Fujinon XA20sx8.5BERM-K3 ENG Lens: https://www.bhphotovideo.com/c/products/Zoom-Focus-Controls/ci/1889/N/4028759352?filters=fct_lens-connectivity_3231%3Afujinon-lenses-8-pin

Q: 5. Does this lens have a Fujinon 12 pin or 8 pin port for focus control?

A: This has an 8 pin connect for the Servo Zoom control. For focus control you need a module like the one that is included with the Fujinon MS-01 Rear Zoom and Focus Lens Control Kit for ENG/EFP Lenses, BH #FUMS01. https://bhpho.to/2Ng1p3g

Q: 6. Can I use this lens on a black magic URSA Mini Pro 4.6k G2?

A: You can use 2/3" B4 lenses on the Ursa Mini Pro G2, you will just need the Blackmagic Design URSA Mini Pro B4 Mount, B&H # BLUMPB4M. https://bhpho.to/2GXa2Pa

Q: 7. Will it work a Blackmajic 6K camera?

A: No. This lens covers 2/3" sensors and will not work with the BMPCC 6K, which has a S35 sensor.

Q: 8. Will these work on older (SD) ENG cameras, like the panasonic sdx900?

A: Yes, 100 as the Panasonic sdx900 is based on a 2/3 system.

Q: 9. Is there any other servo controllers that work with this lens?

A: You can see a list of the servo controllers compatible with the Fujinon XA20sx8.5BERM-K3 ENG Lens listed at this link: https://bhpho.to/4bV7dcG.

Q: 10. Will this work on a Blackmagic studio 4k?

A: For a Blackmagic Studio 4K camera (with Micro Four Thirds Lens Mount), you would need an adapter such as a MTF Services Ltd B4 2/3" To Micro 4/3 Adapter (MTB4M43). This will not power the lens, but will work for manual controls. https://www.bhphotovideo.com/c/product/831820-REG/MTF_Services_Ltd_MTB4M43_B4_to_MICRO_4_3.html