The 220V 24855EBI Tensioned Advantage Deluxe Electrol 90 x 160" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite is designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24855EFI.

184" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Closure Door Hides Open Space    Smooth Roll Technology    Box Only (No Screen Fabric)    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum rated case
• White powder-coated closure doors and case for a clean aesthetic
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Will this mount fit an Interfit S1?

A: Yes, the Aputure Lantern 90 (3') is compatible with the Interfit S1 AC/DC HSS TTL Monolight.

Q: 2. Will this fit on a 2’ Quasar lamp?

A: Unfortunately, this Snapgrid is specific to the Cineo Lightblade Edge in the 2 ft size.

Q: 3. Will this fit the Aputure 300x? Is it a good solution for the 300x or is the other lantern better? Also what are good uses of this lantern compared to the dome modifier which I already have?

A: Yes it will fit

Q: 4. Is the interior color of the dark blue case also dark blue, or something else?

A: The interior of the Case Logic Advantage 14" Attaché (Dark Blue) is grey.

Q: 5. can a display be mounted in portrait position?

A: The Peerless-AV Modular Ceiling Mount Kit for 46 to 90" Displays (Black), BH # PEMFPS2K150B, may be oriented in a horizontal/landscape position only.

Q: 6. Will this fit on the Nanlite FS 300c?

A: The Aputure Lantern 90 (3') is compatible with the Nanlite FS-300C RGB LED Monolight.

Q: 7. How do you deal with the rods not spacing out evenly? does not look like photo.

A: When the light shaping tool is full deployed the rod supports can be shifted into place evenly.

Q: 8. Will this work with the Godox SL300III?

A: The Aputure Lantern 90 (3') BH #APAMOLANTERN can be used with a Godox SL 300III.

Q: 9. Will this work on a Novatron 240?

A: If you mean would you be able to use this product along with the Novatron 240, probably. The Novatron system does not have built-in optical slaves, but the monolights with this kit do, so you should be able to fire the Novatron system with you camera and let the optical slaves on this monolight kit fire them. You have to manually adjust the power settings on these to achieve proper exposure and the lighting effect you want.

Q: 10. How tall is the Canon ET-160B Short Lens Hood?

A: The short hood is approximately four inches tall. https://bhpho.to/3jbw7th