The 4x20 Electro Sight M-16 Carry Handle Riflescope (Black Matte) from Barska is constructed specifically to fit the carry handle of an M-16 or AR-15 rifle. The Electro Sight's base easily mounts to the inside track of these rifles carry handle. A small see-through hole has been provided at the bottom of the sight's base so that the rifle's iron sight is still seeable and fully functional with the Electro Sight mounted. The scope offers a 20mm tube with a 30/30 reticle and multicoated optics. It is endowed with ½ MOA adjustments of the windage and elevation turrets. Backed by Barska's Limited Lifetime Warranty, it comes with a black matte finish, lens cloth and scope caps.

20mm Tube    30/30 Reticle    Multicoated Optics    Mounts to M-16 and AR-15 Carry Handle    Waterproof

Matte black finish

20 mm tube diameter

Waterproof for all weather use

Mounts to the carry handle of an M-16 or an AR-15

Windage and elevation turrets, click value of ½ MOA

Multicoated optics on at least one lens surface reduces light loss and glare

The 30/30 reticle features a familiar 4 post and cross hair configuration. Medium length and weight posts guide the eye to the center of the sight picture where lightweight stadia intersect to indicate the exact point of aim

Related Questions and Answers

Q: 1. How do you adjust the settings for peaking? Like what IRE level to trigger.

A: Please contact LILLIPUT USA for detail,thanks!

Q: 2. Is the entire body plastic or the mount only?

A: The Sony E PZ 16-50mm II lens has a metal body and only the lens mount is plastic to help reduce the weight from 116g (the first version of the lens) to 107g.

Q: 3. Will this work with the Sony A7C?

A: The Sony E PZ 16-50mm f/3.5-5.6 OSS II Lens (Sony E, Black) is compatible with the Sony a7C Mirrorless Camera. However, this lens is designed for Sony APS-C sensor cameras and will create a crop factor on full frame cameras, such as the Sony a7C. The megapixel will drop to 10MP in crop mode.

Q: 4. mp4?

A: The A7C records in XAVC S which uses a .MP4 container

Q: 5. What accessories do I need to use the WHDI wireless feature?

A: Ok, but among THIS monitor’s “features” it says “ Supports Wireless HDMI (WHDI) Technology”, what makes this monitor different from any other with regard to wireless capabilities?

Q: 6. Does this lens have any weather sealing?

A: The Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR is not weather sealed.

Q: 7. Is this lens rectilinear?

A: The Sony E PZ 16-50mm f/3.5-5.6 OSS II is not rectilinear. There is visible distortion between 16 and 24mm.

Q: 8. What's the difference between the 1st version and this second version as the specs seem to be the same?

A: Even though the optical formula of the lens is unchanged over the previous version, Sony E PZ 16-50mm f/3.5-5.6 OSS II Lens has an updated control chip which allows the lens to focus while zooming. This also means that the lens can keep up with the 1080/120p video recording mode on the new ZV-E10 II. The new version is now able to communicate gyro information from it's stabilization system to the camera body, allowing better coordination between the two. The move from a metal lens mount to a plastic one in the Sony E PZ 16-50mm f/3.5-5.6 OSS II Lens helps reduce the weight from 116g to 107g (3.8oz).

Q: 9. If I were to mount the Sony E 70-350mm f/4.5-6.3 G OSS Lens to this camera and not allow it to go down to crop sensor mode what would the actual focal length be? Also, when this camera does drop down to crop sensor mode with crop lenses, does it loose any megapixels/quality of images?

A: Hi Robert, without APSC mode the view of frame will have shadow around all 4 corners because the lens is designed to be used with crop sensor camera. When you change the camera to crop mode the viewing angle will not have any shadow in the corners but you will lose the megapixels count and thus a lower amount of resolution on the image. We recommend using an FE lens on the full frame camera body like the a7C.

Q: 10. I'd like to use this lens on my Z6. Do I need to go into the menus to set anything, or will the camera automatically go into crop mode when I attach the lens?

A: The camera will automatically crop when you put a DX lens on the Z6.