The black Telefunken M80-WH Wireless Dynamic Microphone Capsule is a screw-on capsule version of the wired handheld M80 microphone. This wireless capsule is intended for use with compatible Shure wireless transmitters (Axient, UHF-R, QLXD, ULXD, ULX, PG, PGX, SLX, and UR2), Lectrosonics HH and HHa transmitters, and Sony UTX-M03 transmitters. It is revered for its exceptional frequency response, sensitivity, and control over proximity effect. Its "condenser like" sound is a result of an American-made, custom-wound transformer, making it a favorite among demanding musicians on stage and in the studio. The supercardioid polar pattern effectively controls feedback and off-axis noise.

For Select Shure Wireless Transmitters    For Lectrosonics HH/HHa Transmitters    For Sony UTX-M03 Transmitters    Supercardioid Polar Pattern    Enhanced Directionality    Wide 50 Hz to 18 kHz Frequency Response    High 135 dB Maximum SPL

Interchangeable capsule for a variety of wireless transmitters: Shure Axient, UHF-R, QLXD, ULXD, ULX, PG, PGX, SLX, and UR2, Lectrosonics HH and HHa, and Sony UTX-M03

Wide frequency response and high SPL capabilities

Condenser-like performance in a rugged dynamic design

Capsule assembly has been designed to reduce proximity effect and enhance vocals

American-made, custom-wound, impedance-matching transformer

Related Questions and Answers

Q: 1. Is the wh 200 compatible with gitzo 2545 or 2542?

A: Yes, it is compatible with any tripods 3/8 thread. It is truly a great piece of gear. I use it for wildlife all the time and even used it when photographing the total solar eclipse.

Q: 2. How much does the WH-200 weigh? My friend has the Jobu Heavy Duty Mark IV, and he loves it. Which is the better gimbal mount? The Jobu is $130 less, btw.

A: The Wimberley WH-200 Gimbal Tripod Head II with Quick Release Base weighs 3.1 lb / 1.4 kg. Both that and the Jobu Design DMG-HD4 Heavy Duty Gimbal Head MK IV are very good gimbals. Wimberley as a brand is top rated for gimbals and plates. And it can support much more weight at no more than 100 lb (45kg).

Q: 3. Has anyone put a RRS quick-release clamp on this? If so, how does it work for you?

A: Yes, the RRS clamp works well with this gimbal.

Q: 4. I'm looking for the right accessories for the Canon 800mm. It looks from the chart as though I need a P50 plate, but also specifies + BS-100 I can't find this additional product -- what's this referring to? Thanks.

A: From their chart the P-50 is the correct plate for the Canon 800mm. I noticed from their catalog and website the BS-100 is a3/8 to 1/4 Brass Reducer Bushing. Most of these lenses have 3/8 and 1/4 mounting holes on the bottom of the feet. I looked and the Plates use 1/4-20 mounting screws and the P-50 lens plate comes with a bushing to use, so all you need to purchase would be the P-50 lens plate.

Q: 5. If I use this gimbal head is there a need to have a ball head at all?

A: A gimbal head is designed to only work with long lenses that have a tripod collar. If you use shorter lenses you will need another head like a ball head.

Q: 6. Is this usable with Induro tripods?

A: Yes,If your tripod has a 3/8 stud it will work. I use my WH-200 on a Fiesol tripod with a 600mm f/4 and either a Nikon D500 or D810 with battery back.

Q: 7. what plate shood I buy for a canon 100/400

A: The Wimberley P20 Quick Release Plate, B&H # WIQRPP20, would be the correct plate for use with the Canon 100-400mm f/4.5-5.6L EF IS USM lens. http://bhpho.to/1yAXgZi

Q: 8. What's the difference between a Wimberley Quick Release Plate and a Wimberley Replacement Foot? I am considering buying a Wimberley Gimbalhead WH-200 II for use with my Nikon 70-200mm AF-S 2.8 GII ED lens and am confused about the required accessory. Thank you.

A: The Quick Release Plate is attached to your existing camera foot on the rotation collar of your lens.The foot replacement is a low-profile replacement foot that will replace the factory foot on the rotation collar of your lens and also serve as quick-release plate.You need to research to see what foot plate you need (it might be the Wimberley AP-554 but I not sure.) I recommend you contact the manufacture or B&H to see if a foot is made for your specific lens.

Q: 9. Would I be able to use the WH 200 with my Gitzo GT2531 tripod? I have a Nikon D800 and 70-200 f 2.8 and 80-400 lenses.

A: I think so- I have a Gitzo carbon 6X with a WH200 attached. I have a Nikon 810. You may need to purchase an (arca?) quick attachment plate. I suggest you call them tomorrow before you order and confirm with customer service--they have been great when I have questions

Q: 10. Will Jobu Design Replacement Foot for Sigma 150-600 Sport Super Telephoto Lens, B&H # JOLFS156S MFR # LF-S156S work with Wimberley WH-200 Gimbal Tripod Head II ?

A: All the quick plates and have the same width. That will work