The MM-BSM-8 In-Ear Binaural Stereo Microphones from Microphone Madness are binaural in-ear stereo microphones that terminate with a 1/8" stereo mini-jack connector. They can be used to capture audio that replicates human hearing with authentic, true-to-life stereo imagery for audio recorders supplying a bias voltage of between 1.5 to 10 VDC (also known as plug-in power). In addition, the microphones do not block your hearing ability.

These microphones are designed to be worn like headphones to achieve the most accurate stereo placement possible and offer a naturally crisp sound, providing deep bass, smooth mid-range, and clean high-frequencies for detailed recordings. The MM-BSM-8 In-Ear Binaural Stereo Microphones are compatible with (but not limited to) the following recorders: Edirol R9, Kodak Zi8 HD pocket video camera, Olympus DS-40, Olympus LS-10, Tascam DR-01, Tascam DR-03, Tascam DR-07, Yamaha CX, Zoom H1, Zoom H2, and Zoom H4N.

Flat Frequency Response    Totally Flexible and Form-Fitting Design    Hands-Free Microphones    Installs Quick and Easy, Over the Ear    Microphones Securely Fit into Ear    Does Not Block Hearing Ability    Gold-Plated 1/8" Stereo Plug    Requires 1.5 to 10 VDC (Plug-In Power)

The binaural design of the microphones allows both capsules to mount in-ear to recreate the stereo perspective achieved by human hearing.

Both elements feature shielded cables and terminate to a single stereo 1/8" output connector. The connector is compatible with microphone inputs that supply a bias voltage of 1.5 to 10 VDC (also known as plug-in power).

The mic is compatible with the Edirol R9, Kodak Zi8 HD pocket video camera, Olympus DS-40, Olympus LS-10, Tascam DR-01, Tascam DR-03, Tascam DR-07, Yamaha CX, Zoom H1, Zoom H2 and Zoom H4N and many more recorders with mini-jack mic inputs offering plug-in power.

Related Questions and Answers

Q: 1. What is the thread size of the center of lense cap? Is it possible to screw a nd filter in front? I'm ok with some vignetting.

A: The front push on cap available with TTArtisan 7.5mm f/2 Fisheye Lens (Canon RF) has a 60mm front thread diameter once you unthread the metal cap. If you are using a full frame camera there is vignetting regardless if the cap is connected or not. If you connect the lens to cameras with aps-c sensors it only vignettes when the cap is connected.

Q: 2. will this fit a nikon z6?

A: The TTArtisan 7.5mm f/2 Fisheye Lens with ND1000 Filter for Nikon Z will fit and work on the Nikon Z6. The lens is made for APS-C sensor so you will get a cropped image or a lot of vignette.

Q: 3. I have a Nikon Z camera will this fit?

A: Yes, this TTArtisan 7.5mm f/2 Fisheye Lens with ND1000 Filter for Nikon Z will work with your Nikon Z camera.

Q: 4. Can this lens fit on a Sony a5100 camera?

A: No. This would only be suitable for Olympus, Panasonic, and MFT-mount cine cameras.

Q: 5. Are these holders compatible also with OpticFilm 7300?

A: Yes

Q: 6. IS the aperture fixed?

A: If I understand your question correctly the answer is no . You can change the aperture (F stops) f5.6. f8, f16 etc. through the camera settings. There is no aperture ring on this design. Most of the Panasonic cameras have the marking S== shutter priority, A= aperture priority, P= Auto mode where the camera determines the correct combo of shutter speed/ f stop. ( On some of the Panasonic lens there is an aperture ring that you can manually set). The 1.7 marked on your lens indicates the amount of light gathering. Hope this was helpful.

Q: 7. Does this make the image look like a traditional fish eye lens?

A: Yes, it is a fish eye lens. On a full frame Nikon Z camera, it will be an actual round image and fisheye. And on a crop Nikon Z camera it will be fish eye but not round.

Q: 8. Is it compatible with the canon eos r10? if so does it produce a round fisheye photo or a nonround fisheye photo on this camera?

A: The manual focus TTArtisan 7.5mm f/2 Fisheye Lens (Canon RF) is compatible with the Canon EOS R10 Mirrorless Camera. Since the R10 is a cropped sensor camera, you get a rectangular image.

Q: 9. Does this lens come with a hood? If not what is a high quality one I can purchase?

A: Yes; as indicated under the In The Box section on our website, Panasonic includes a lens hood with the lens purchase. The following items are listed on our website under the In The Box tab as included with the Panasonic LUMIX G 42.5mm f/1.7 ASPH. POWER O.I.S. Lens:In the BoxPanasonic LUMIX G 42.5mm f/1.7 ASPH. POWER O.I.S. LensLens HoodFront Lens CapRear Lens CapLens Storage BagDecoration RingLimited 1-Year Warranty

Q: 10. Can this be used for DSLKR scanning against a flat surfaced light table?

A: No, the following units are made and designed for the 8100 & 8200i Ai from Plustek each hold 1 strip of six 35 mm negatives at a time.