The HighPoint RocketRAID 2782 SAS 6 GB/s PCI-E 2.0 x16 Host Bus Adapter optimizes performance by aggregating multiple SAS controllers, thereby overcoming the performance bottlenecks faced by conventional Host Bus Adapters. The RocketRAID high port count SAS RAID HBA's 32 dedicated ports deliver a connectivity bandwidth of up to 19200 MB/s.

Host Adapter Architecture    SFF-8088 and SFF-8087 Connectors    RAID 0, 1, 5, 10, 50 & JDOB    Maintenance & Management Settings    RAID Management Utilities    Operating System Support    RAID Monitoring Tools

• PCI Express 2.0 x16
• Up to 24 Internal SAS/SATA HDD via 6 SFF-8087
• Up to 8 External SAS/SATA HDD via 2 SFF-8088
• RAID 0, 1, 5, 10, 50 and JDOB

• RAID Array Roaming
• Unplug/Remove RAID array
• Hot key (ctrl-h) boot-up RAID manager via BIOS
• Firmware update while running the operating system
• Verify RAID Array for Bad Sectors and Parity Check
• Task Scheduler
• Automatic RAID rebuild
• Automatic drive (insert / removal) detection
• Hot Spare Disk
• Staggered Drive Spinup
• Rebuild Priority (Low - Highest)
• Spin Down Idle Mode
• Hot Swap and Hot plug
• Bad sector repair and remapping to reduce dropped drives
• Multiple RAID array
• Multiple Logical Drive
• 64-bit LBA support greater than 2 TB per volume

Command Line Interface (CLI)
Web browser-base RAID management software
API

Windows Vista, 2008, 7 (32/64-bit)
Linux 1.0
FreeBSD 1.4

SMTP for Email notification
Alarm / Buzzer alerts for drive failure
SES-2 enclosure management (Failed, SMART (SHI))
Enclosure management support I2C
Hard Drive LED indicators (Activity and Failed)
SHI (Storage Health Inspector - Drive analysis from S.M.A.R.T)
Event Log

Related Questions and Answers

Q: 1. Can I download/import pictures from this reader directly to iPad?

A: it will work with camera adapter that apple used to make. but you will lose in quality most likely.

Q: 2. Does this come with the three step up rings as I have seen in online reviews?

A: No, this kit does not. It is the 1.33 standalone lens that comes with the step up rings. That is here: SLR Magic Anamorphot-50 1.33x Anamorphic Adapter B&H # SLRA50133X.

Q: 3. Can you use the Panasonic 35-100MM f 2.8 Zoom with this setup?

A: You can use this on any lens it fits and any camera the lens fits. However, since the performance of the Anamorphot is very dependent on the lens, it is suggested that for best performance you use heavy duty primes not lightweight front focus focus by wire zooms. You could fit this adapter to that lens with Sensei 67-62mm Step-Down Ring B&H # SESDR6762. However, it would be our opinion that the Panasonic Lumix G X Vario 35-100mm f/2.8 would not be truly suitable for the Anamorphot.

Q: 4. I have Canon 5D MARk IV, buying SLR Magic Anamorphot-50 2.0x with Rangefinder, which lens would be best tips with SLR Magic Anamorphot-50 2.0x with Rangefinder?

A: I a sorry, we are not currently offering any Canon lenses with a 62mm front filter thread to use with this lens accessory.You may want to acquire this product as it includes three step-down rings.SLR Magic Anamorphot-50 1.33x with Rangefinder Cine Adapter Kit B&H # SLRA50133X77 49 to 62mm Step-Up Ring52 to 62mm Step-Up Ring58 to 62mm Step-Up Ring

Q: 5. Hello there. I want to buy it for use on my Fuji xt3 camera. But the camera does not have a 4: 3 mode. There's only 16: 9. Can I use it?

A: The 2.0x anamorphic adapter used on a 16:9 sensor would result in a 3.55:1 image, which is typically too wide to use. A better choice would be the 1.33x anamorphic adapter, which when desqueezed would give you 2.35:1.

Q: 6. how would this work on a ursa mini 4.6k? what is the widest lens i could use?

A: The 2x squeeze is very wide. If the ursa mini 4.6 shoots at 16:9, you might prefer the 1.33x, which gives 2.35:1 cinemascope. The 2x with 4:3 format gives 2.66:1, which has to be cropped if you want CS.The minimum focal length depends on a lot of factors (including how close you get the lens to the adapter). Trial and error with different taking lenses is required. In general, do not expect to go too much below say 30 - 40 mm.

Q: 7. Can I use this anamorphic adapter with a Fujifilm GFX 100 and a G mount lens?

A: You cannot. The GFX 100 is a Medium Format camera, which is larger than Full Frame. You will not be able to use this kind product on a Medium Format camera.

Q: 8. Is there a way to update the firmware on this lens?

A: Yes. For your firmware update needs please review the following https://bhpho.to/30SHhPW

Q: 9. Does this lens come with the lens hood or is that separate?

A: A lens hood is not included with this lens.

Q: 10. What's the difference between the Slr magic $599 vs $299 rangefinder? The information looks the same. The only thing I see that's different is that there are number indicator on the $599.

A: The principal difference and the reason for the cost is that the SLR Magic Rangefinder Cine Adapter B&H # SLR77RFWM works with the SLR Magic Anamorphot series of adapters, currently 1.33x and 2x. The SLR Magic Rangefinder Cine Adapter with Near/Normal Calibration (72mm) B&H # SLR72RFNN, on the other hand, cannot work with the Anamorphot lenses.