The MZEF 8120 Vertical Extension Bar (120cm) from Sennheiser is a special extension piece designed for use with select Sennheiser microphones and hardware. It allows you to vertically extend the position of your microphone to achieve perfect height placement. Use this piece to meet the unique needs of your audio setup. The bar features a 3/8" thread.

Vertical Extension Bar    Adjust Microphone Height    3/8" Thread

Use this vertical extension bar to achieve perfect height placement with your microphone.

Related Questions and Answers

Q: 1. Can I use Phottix PH82591Elinchrom speedring for this?

A: Yes, the Phottix Speed Ring for Bowens Flash Heads BH #PH82590 is compatible with the Elinchrom Litemotiv 120cm Parabolic Softbox. BH #ELLM120. However it is highly recommended that the Elinchrom Speed Ring be used for this large Softbox to ensure proper control and balance of the studio strobe and Softbox. BH #ELLMBB

Q: 2. Will these work with in camera focus shift shooting?

A: Yes they will with Nikon Z mount lenses.

Q: 3. Can the flash tube be taken from the 600 Ws and inserted into this extension head?

A: Yes it can

Q: 4. I see that they stack with each other; however, if you got two sets, could you stack the two 16mm? Or stack 3 of them?

A: It really depends on the lens you are using. With a wide angle (35mm or wider) you can not do it even with the 10 and 16 stacked. The focus point would be nside the lens . With a telephoto lens you can. There is a math equation to know wich lens you can use with the stacked adaptors, , but I forgot......

Q: 5. Which bracket should I buy for my Profoto ComPact-R 600 that will fit the Elinchrom Octa?

A: The Elinchrom Litemotiv Octa Bracket for Profoto, BH # ELLMBP would be the proper mount for the Profoto Compact R 600. https://bhpho.to/3yVmmJg

Q: 6. its not clear whether the elinchrom bracket is included...?

A: Due to the size of the Litemotiv it needs the bracket. EL26537.a href= http://www.elinchromus.com/light_shapers/litemotiv.html#p-EL26537 target= _blank http://www.elinchromus.com/light_shapers/litemotiv.html#p-EL26537/aRegards,Will

Q: 7. I have the manfrotto 1005BAC light stand, will it be enough for this litemotiv 120cm softbox? Or do I need a better light stand?

A: Hi,The weight is not the issue. Ideally you want a stand with a bigger foot print so that it will not tip over. You could use your 1005BAC but you would have to weight them down with sandbags as they are rated for 22lbs or 10kg.Ideally look for a stand with a Junior mount. https://a href= http://www.bhphotovideo.com/c/product/840739-REG/Kupo_KS500112_Master_High_Cine_Stand.html target= _blank www.bhphotovideo.com/c/product/840739-REG/Kupo_KS500112_Master_High_Cine_Stand.html/aI hope this helps.Regards,Will

Q: 8. Elinchrom Litemotiv 120cm Parabolic Softbox can I hook this to my white lightning mono light by Paul c buff

A: Unfortunately, Elinchrom does not produce an adapter allowing a White Lightning Monolight to fit this modifier.

Q: 9. What's in the box?

A: According to Elinchrom, the Litemotiv 120 would include the outer fabric, 16 rods, yoke assembly, rear cover, an inner diffuser and an outer diffuser.

Q: 10. Is the bulb included with purchase?

A: The flash tube for the head is purchased separately. It is not included.