The KLX-TX500 Chainable DVI/VGA KVM Transmitter from Smart-AVI transmits DVI/VGA, KVM, and IR signals up to 500' via LAN. It is designed for use with the KLX-RX500 Receiver. You can set up your own extension cabling or utilize the pre-existing LAN infrastructure you have access to.

The KLX-TX500 Transmitter compresses data to utilize Cat5e/6 cables, but you will see no degradation of signal when using one Gigabit Internet connections and up. When utilizing pre-existing LAN connections, implementing a one Gigabit switch allows for full resolution extension. If you use smaller bandwidth, you will experience compressed signals, if you choose to forgo the additional switch.

With no software or driver required, you can easily extend DVI/VGA, KVM, and IR signals. The KLX-TX500 Transmitter supports USB emulation and Full HD 1080p video at 60 Hz, and can be controlled with an IR remote control (not included). The transmitter is a compact unit that is suitable for use in pre-configured work environments.

Transmits KVM signals up to 500' feet via LAN (CAT5e/6 cables)

Chainable for thousands of feet of extension

Supports DVI and VGA monitors

Supports full USB emulation

Audio input and output

Dual control operation with both local and remote use of KVM

Supports high resolution Full HD 1080p up to 1920 x 1080 resolution at 60 Hz

Can be controlled with an IR remote control (not included)

Plug-and-play ready

No software or driver required

Related Questions and Answers

Q: 1. dimensions?

A: The Thermaltake Smart 500W 80 PLUS Power Supply is a standard ATX form-factor power supply.

Q: 2. Can these docks charge the handheld transmitter with other rechargeable batteries?

A: This Shure SBC200 Transmitter & Battery Charger is designed for SHURE products only. Works with compatible handheld and bodypack units such as the P9RA, P10R, ULXD1, and ULXD2

Q: 3. Will this charger work to charge a QLXD1 bodypack transmitter with SB900 battery and without taking the battery out of the transmitter?

A: Yes, the Shure SBC200US Transmitter & Battery Charger with Power Supply will charge a Shure QLXD1 Digital Wireless Bodypack Transmitter using an SB900 battery within, without having to remove the battery from the transmitter.

Q: 4. I'm trying to move my cable box to a closet in another room. would like to install a IR remote eye to my tv in order to have no cable wires showing. is that possible?

A: This item may or may not work with your cable box. So that we may find a solution for you, please email us. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 5. How many RU does this take up? Will it fit in a 2U space, or does it need more room?

A: CyberPower CPS1500AVR Smart App Equipped Uninterrupted Power Supply is 2 RU.

Q: 6. Can IEC to regular 3-prong female be used to power non-IEC devices?

A: No, this unit outputs 230VAC and will damage / destroy most electronics that use 110/120VAC. It uses an IEC female plug to prevent accidental use with standard 110/120VAC plugs.

Q: 7. Will this charger (Shure SBC200 Transmitter & Battery Charger) also charge the SB900A rechargeable batteries that replaced the SB900 rechargeable batteries?

A: Yes

Q: 8. DOES THIS COME WITH RAILS? IF NOT, WHICH ONES FIT? thanks! :)

A: The CyberPower CPS1500AVR Smart App Equipped Uninterrupted Power Supply BH #CYPS1500AVR comes with rack ears for rack mounting, it does not include rails. If you want rails, you can purchase the CyberPower 4POSTRAIL Rackmount Rail Kit BH #CY4POSTRAIL.

Q: 9. Can SBC200 charge two QLXD-2 transmitters at the same time?

A: Yes. It can.

Q: 10. can it work in 220v ?

A: This is dual voltage 100-240V and will work in 220V countries.