Create high-impact displays and banners with this 60" x 150' roll of Light Fabric from HP. It is made of a wrinkle-resistant polyester fabric material and offers a basis weight of 218 gsm. Also, it is 15 mil thick and offers an opacity of >75%, a brightness of 92%, and a whiteness of 138% with the ISO 11475 test method. The matte surface is instant drying for convenience as well as flame resistant and water resistant with latex inks. Additionally, it is REACH compliant and OEKO-tex certified for health and safety standards.

This product is not compatible with inkjet printers.

Polyester Fabric Material    Basis Weight: 218 gsm    Thickness: 15 mil    Opacity: >75%    Brightness: 92%    Whiteness: 138% (ISO 11475)    Surface Finish: Matte    Instant Drying & Flame Resistant    Water Resistant with Latex Inks    REACH Compliant

Related Questions and Answers

Q: 1. CAN THIS BE USED WITH HP 8900PS ? THANKS!

A: Sorry I couldn't find this model "HP 8900PS". I you can please clarify the model # or send us a link. Thanks,

Q: 2. Can this media be used on an HP Designjet 800 ps ?

A: No it is not recommended for that printer.

Q: 3. Is this acid-free or PH neutral?

A: This paper is not acid-free. Also, pH is a measurement of the concentration of hydrogen ions in auqueous solution. If more hydrogen ions are introduced, the balance goes toward an acidic solution. If more clacium carbonate is added, the solution becomes more alkaline. Buffers, such as the bonding on this paper, is hydrogen-based and adds to the acidic value of this paper. So it is not pH-balanced, or neutral.

Q: 4. Can you use EPSON T7200D Series Printer?

A: Yes, The HP Permanent Adhesive Vinyl can be used on the Epson T7200 series printer.

Q: 5. What is the paper weight?

A: Weight: 200 g/m per ISO 536 Test MethodThickness: 228 microns/9 mil per ISO 534 Test Method

Q: 6. Can This Vinyl be used with a Canon iPF 780?

A: No! This vinyl is made for Solvent, UV, and Latex Ink Printers "only". The IPF 780 only uses Dye Based Ink & the ink will just run off the vinyl. For this printer try this vinyl. Follow the link: https://www.bhphotovideo.com/c/product/1043645-REG/hp_c2t51a_universal_adhesive_vinyl_36.html/specs

Q: 7. Does this paper have a texture to it?

A: Yes, the Photo Tex Aqueous Inkjet Fabric has a matte finish to its surface.

Q: 8. Is this the same material as the Kodak Photo Fabric Stick Ups sold in packs of 10 sheets, 8.5x11?

A: This is not the same material. To begin with the Kodak Photo Fabric Stick Up is a matte tear resistant paper, the Photo Tex is an aqueous coated Polyester/Cellulose blend.

Q: 9. Are you able to use this paper with non-latex printers?

A: i admit i haven't put a roll 200ft long in the printer yet, I always use the 100 ft rolls. but the 100 ft rolls that are universal heavyweight coated work great in my printer. the universal heavyweight is different than the heavyweight paper. The cost was too much for us, but the regular paper was too thin. So we have been using the universal heavyweight for years now and are happy with the print quality and the thickness/sturdiness of it. My printer the HP 800 wide format printer is supposed to be able to print on latex roll paper, but we don't and it would not make sense to do so because the inks don't last outside (the only permanent ink is the the black). I don't know if i can answer your question like an expert, just my experience with my printer.

Q: 10. Can I use this paper on a DesignJet z6800?

A: No, the HP Permanent Adhesive Vinyl (Matte, 60" x 150' Roll) is not compatible with the HP DesignJet Z6800.