The black Countryman B2D Directional Lavalier with Fixed SR Connector for Sennheiser Wireless Transmitters features a lightweight 0.18-ounce body that was designed to be discreetly mounted. It is set to Countryman's Gray Band sensitivity for chest miking. The B2D can be used for miking news anchors, actors in a film or theater setting, or lecturers in a school setting or house of worship.

Featuring a hypercardioid pattern, the B2D rejects surrounding noise with a six to ten greater decibel reduction than an omnidirectional pattern. This results in decreased feedback, ambient noise and phase cancellation when using multiple microphones.

This B2D has a 3.5mm locking plug termination and is designed to work with Sennheiser Evolution Series, EW100, EW300, EW500, G2, G3, and SK 1093 wireless transmitters.

Hypercardioid Pattern    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    3.5mm Locking Plug    Includes Windscreen    5' Cable    Sennheiser Transmitter Compatibility

Hypercardioid pattern rejects surrounding noise 6-10 dB better on average than an omnidirectional lavalier

Aramid-reinforced cable withstands greater than 45 lb break strength

Hides in plain sight by swapping colored caps to match buttonhole, sweater weave or skin tone. You can use a felt-tip marker to color the white caps to get an exceptional mat

Built to withstand perspiration and makeup, for use in hair or on the body

Protective cap is easily removed for cleaning or replacement when clogged with makeup

Can be worn on the chest, forehead, or taped in front of your ear

Included isolation clip minimizes clothing and vibration noise, while allowing 360 degree rotation of the mic for easy positioning

Can be used for redundant miking with a second mic and optional double tie clip

Fixed connector

Related Questions and Answers

Q: 1. Will this trigger (S) fire my Nikon Flashes using a Sony A9 camera? or I need a N trigger?

A: If its a Nikon brand flash then you will need one of these receivers https://bhpho.to/2Xj9N7M. It will give you basic sync control. If the Nikon flash is a Godox like the TT685 or V860 then no receiver needed and It can communicate with a XPro of any type for full TTL HSS and power control.

Q: 2. can this control QS2 series studio ligts?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras may be used to wirelessly control the flash output power of the Godox QS400II, QS600II, QS800II, and the QS1200II studio monolight strobes.

Q: 3. Hello. Can I use the Godox XProF TTL with my Elinchrome D-Lite 4 head lights?

A: The built-in Elinchrom Skyport radio inside the Elinchrom D-Lite 4 monolights are only directly compatible with an Elinchrom-brand Skyport transmitter. If you wish to purchase the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras to wirelessly trigger your Elinchrom D-Lite 4 monolight, you would have to purchase a Godox X-system receiver for use on your monolight.As Godox does not have a X-series receiver for Fujifilm, but they do have cross-brand compatibility within their own 2.4 GHz X-series radio system, you may purchase the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN, to work as a receiver connected to your Elinchrom monolight to be triggered by the Godox XProF TTL Wireless Flash Trigger for Fujifilm.You will have to set the flash output manually, and there will be no TTL automatic flash exposure using studio strobes, but this setup will wirelessly trigger the Elinchrom D-Lite 4 monolight with the XProF trigger.

Q: 4. Will the X Pro N work on Sony a6300 ? ?

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON can be used in manual with a Sony camera. TTL and HSS will not work.

Q: 5. Does it have a locking mechanism to prevent it from falling off the camera and destroying the lens? I bought one by Vello that I had to stop using because it didn't lock onto the camera.

A: This adapter attaches to the camera as securely as a lens. Any lens adapter that's operating correctly will fit in the camera as securely as a lens; if you have a defective adapter, it may not be secure.

Q: 6. how does one change the aperture if the pentax 28-45 lens is used on a 645n(film) body ?

A: Take your camera to any store that sell the same model or newer or mail Pentax.. HUH?

Q: 7. Will it fit a A7II?

A: Yes, this is to fit old Minoltas on Sony e-mount, of which the A7s and the NEXes are.I use this adapter to fit a 58mm f1.2 Minolta MD Rokkor to my A7ii.

Q: 8. Can this trigger save flash settings for quick location / look changes like C1, C2, C3 for camera user settings?

A: Unfortunately, flash settings cannot be stored.

Q: 9. Will this adapter work with an A6000?

A: Yes, I use this adapter on my A6000 so I can use my Minolta MD mount lenses.

Q: 10. Anyone know what the maximum filter thickness is before vignetting at the 28mm end with the lens attached to a 645z body?

A: I use a B+W thin circular polarizer 82mm and have not noticed an issue. Vignetting would only be an issue at 28mm.