The Comprehensive HD15 Plug to Plug Computer Adapter contains a male HD15 plug on one end and a male HD15 plug on the other.

Male HD15 to Male HD15

Related Questions and Answers

Q: 1. I purchased the ES-1 and the 27mm PK-13 Extension and have them set up on a D90 with a Nikor 55mm macro lens and a UV filter. With the ES-1 fully extended 70mm and the lens focused at a lens length of 70mm (for a total slide-to-image distance of 167mm), I get a nicely focused full frame shot of my slide. The only problem is that the bottom of the image is slightly cropped. It seems with experimentation that I would have to move the slide about another 150mm off the lens and then refocus a bit to remedy this problem. But everything I read indicates that this set up should work. Is some cropping inevitable. Do I need a longer tube?

A: Since the D90 has a DX sensor, you need less magnification to copy a slide than 1:1. With a 55 mm Micro-Nikkor, you will need a PK-13 extension tube between the camera and lens to achieve 1:1.5 magnification, and a K extension between the lens and the ES-1. K tubes are only available used, and are 52 mm M to F adapters in several lengths.

Q: 2. thread size?

A: Nikon does not list the tread size for the Nikon ES-1 Slide Copying Adapter as it is compatiable by attaching it to the AF Micro-Nikkor 60mm f/2.8D lens with the BR-5 Ring or the Micro-Nikkor 55mm f/2.8 lens.

Q: 3. Does the la-ea5 have any shutter lag, which the la-ea3 has?

A: With Full support for focal plane phase-detection AF, Real-time Eye AF (human & animal), Real-time Tracking, and continuous AF/AE tracking3 at up to 11 fps,.Don't think Lag is an issue with the right Camera / lens combination. Full compatability info Can be found here. https://support.d-imaging.sony.co.jp/www/cscs/accessories/?mdl=LA-EA5&area=gwt&lang=en_US

Q: 4. Is this adapter made of plastic or metal?

A: The Godox Bowens Adapter for ML100Bi & ML60IIBi is made of plastic.

Q: 5. Apologies if this is already asked and answered - I could not find the answer to the specifics of my setup. I have a Canon EOS Rebel t3i and a Canon EF-S 55-250mm 1:4-5.6 58mm lens. Would this product work for me and if so, with what modifications required? Thanks so much!

A: Google Scanning thousands of old slides? and select scanning thousands of old slides use a digital camera. You will need a macro lens and I don't know if your lens has macro capability at 55mm, The ES-1 has a 52mm thread so you would need a step down filter ring. I found the old Nikon K extension tube set on Ebay. A little research should answer the question about your Canon equipment. The bottom line on the product is that it has a little learning curve, white balance, alignment etc, but it does a great job.

Q: 6. I have a Fuji XT 1, the 60mm macro which does 1:2 and the MCEX 16 extender. Can I configure this to use with my set up?

A: not sure, but I'd guess probably not since you're using Fuji equipment and this is specifically designed for Nikon micro lenses.

Q: 7. With this if a lens has Image Stabilization, will it work in tandem with the IBIS?

A: If he lens has stabilization this adapter will maintain that. If your camera has IBS any lens stabilization will work with it yes.

Q: 8. Does this adaptor work with the Eos 5D Mark IV?

A: No, Canon Mount Adapter EF-EOS R is design to fit Canon DSLR lenses (EF or EF-S) to mirrorless camera bodies, The adapter has a Canon RF camera mount therefore you can not connect to Canon 5D mark IV which has a Canon EF lens mount.

Q: 9. Will this work with the Canon EOS R8 and a Canon EF 24-105 mm f/4L IS II USM lens?

A: Yes. The Canon Mount Adapter EF-EOS R is fully compatible with the 24-105mm EF lenses when used on the R series cameras such as the R8.

Q: 10. When the ef-s 10-22 lens is mounted on the R adapter(s) will it produce vignetting since the lens was designed for the cropped sensor?

A: EF-S lenses are automatically cropped to an APS-C sized portion of the full frame sensor, so no vignetting. FF to APS-C cropping reduces 30.3 megapixels to 11.6.