The CLP-02 Clamp from Chauvet is a medium-duty C-Clamp made of steel that fits most fixtures up to 55 lb. The clamp is compatible with 1 to 2" trussing.

Load Capacity: 55 lb    Adjustable Knob    Steel Construction    Fits on Most Fixtures    For 1 to 2" Trussing

Related Questions and Answers

Q: 1. The centre hole accepts a 3/8-16 post. What is the maximum length of that post, before it protrudes through the top & interferes with the clamp?

A: It is 12mm thick

Q: 2. Will this work securely with the Really Right Stuff L-Plate for FUJIFILM GFX 50R? There don't seem to be any anti-slide screws on that plate's underside, unless I'm thinking about this all wrong.

A: Yes. The Lever-Release Clamp will be able to securely grip the L-Plate. The anti-slide screws are just there for added security before one fully tightens the clamp. When the clamp is fully tightened it will hold the plate in place regardless of whether it has those screws or not.

Q: 3. Has anyone been able to get this to work on the ZFC with firmware 1.4.0?

A: The Techart PRO TZM-02 Autofocus Adapter for Leica M-Mount Lens to Nikon Z-Mount Camera is compatible with the Nikon Zfc camera.

Q: 4. Is there a way to adjust the friction tension? If I were to release the tension to reposition what prevents moving?

A: The FLM 47GX Centerball Tripod Head with SRB-40 QR Clamp has a friction tension knob. You can adjust the friction tension by tightening or loosening the friction tension knob. If you open the friction tension knob all the way, the main ball adjustment knob will be the only knob that will prevent the head from moving.

Q: 5. Hi can i replace this with the one i have as knobe on ballhead55!?

A: You have to use the RRS BH-55 ballhead. I am using the 80mm clamp and it is much more positive than the Arca Swiss.

Q: 6. Is it possible to swap the normal pan knob with the 15 degree pan knob? I try to keep on the ball head controls on the left.

A: Unfortunately, the FLM 47GX Centerball Tripod Head knobs cannot be swapped.

Q: 7. I have a RRS BH55 ballhead with the 60mm LR (B2-AS II LR) plate on it now. I am contemplating buying the 80mm LR plate for the ballhead for use with my longer lenses and also for the extra locking length on my night sky and long exposure photography. I know this will fit, but I am assuming I will need the 3/8-1/4 reducing bushing to mount this plate to my ballhead stem? Will the interior threading of the bushing interfere with the mounting screw? The plates that come on this ballhead have unthreaded center mounting holes so the mounting screw just drops thru.

A: This clamp use a bolt that screws in and typically screws to the stem of a ball head. You will have to figure out what the thread size of your ball stem is and correctly match the head of the bolt to sit into the countersunk hole of the clamp. The center socket has female 3/8"-16 threads and it accepts metric 6 and 1/4"-20 threaded screws via a bushing adapter. If your head takes a 3/8"-16 bolt, that would be ideal, otherwise you would need a reducer.

Q: 8. Where do I locate the male insert that goes with the QD socket in the Leofoto SF-02?

A: Leofoto does not have the QD socket insert available as a standalone item for the Leofoto SF-02 Lens Foot with Clamp for Sony FE 200-600mm f/5.6-6.3 G OSS Lens. They do however have the Leofoto SP-01+DC-22Q QD Strap & Clamp Kit which can connect directly to this plate, BH #LESP01DC22Q (https://bhpho.to/3R6pmKE).

Q: 9. i just acquired a set of gitzo series 5 systematic tripod legs. would i be better off with the rrs 60mm or 80mm lever release clamp?

A: RRS 60mm works with camera body well and 80mm it is more for long lenses with tripod caller

Q: 10. Will this release system work with arca-swiss p0 ball head?

A: I bought this plate along with the Arca-Swiss P0 Ball Head this past week and it works perfectly.