Wire Dual Voice Coil Sub

Jbl Am7212/66 2-way 12" Loudspeaker System (white)

Product Code: ga267685
Availability: In Stock

$10,554.00 $13,192.50

Qty

0 reviews Write a review

Description
Reviews (0)

The white AM7212/66 2-Way 12" Loudspeaker System from JBL is a high-power, lightweight, 2-way, full range loudspeaker. It is comprised of the JBL Differential Drive, dual voice coil and dual magnetic gap 2262H (12") low frequency driver, and 2432H high frequency 1.5" exit, 3" voice-coil compression driver. The large format Progressive Transition (PT) waveguide provides a 60 x 60° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.

The enclosure is constructed of multi-ply birch coated in JBL's DuraFlex finish and is heavily braced to maximize low-frequency performance. The trapezoid enclosure is fitted with fifteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.

The AM7212/66, a member of the AM7212 family, will perform as either a bi-amped or passive cabinet, at the flick of a switch, making it versatile for many sound amplification applications, such as: performing arts facilities,theatrical sound design, auditoriums, worship facilities, live clubs, dance clubs, sports facilities, and themed entertainment venues.

Parameters
Active or Passive	Passive
Low Frequency Driver	1 x JBL 2262H 12" (305 mm) Differential Drive driver with 3" (75 mm) dual voice coil Nominal Impedance: 8 ohms Sensitivity: 96 dB SPL (1W @ 1m, within operational band)
High Frequency Driver	JBL 2432H, 1.5" (38 mm ) exit compression driver, 3" (75 mm ) voice coil Nominal Impedance: 8 ohms Sensitivity: 114 dB SPL (1W @ 1m)
Frequency Range	36 Hz to 20 kHz (-10 dB)
Frequency Response ± 3dB	42 Hz to 18 kHz
Coverage Pattern	60 x 60°
Coverage Modes	Bi-amp / Passive switchable
Directivity Factor	13.5 dB (Q)
Directivity Index	11.4 dB
Crossover Point	1.6 kHz (Passive)
Transducer Power Rating	LF: 1000 W (4000 W peak), 2 hrs 700 W (2800 W peak), 100 hrs HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating	Passive mode: 600 W (2400 W peak), 100 hrs (IEC)
Maximum SPL	Bi-amp Mode: LF: 126 dB cont avg (132 dB peak) HF: 134 dB cont avg (140 dB peak) Passive Mode: 123 dB cont avg (129 dB peak)
System Sensitivity	Passive mode: 123 dB dB SPL (1W @ 1m)
Horn Waveguide	PT-H66HF-1
Enclosure Material	Trapezoidal with 15 degree side angles, 5/8" (16 mm) exterior grade 11-ply Finnish birch plywood
Suspension Attachment	15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish	White DuraFlex finish
Grille	Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
Input Connection Type	NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 0.2 sq" (5.2 sq mm)(10 AWG) wire or max width .375" (9 mm) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifcations	Mil-Std 810; IP-x3 per IEC529
Dimensions	28.0 x 14.5 x 18.0" (711 x 369 x 458 mm)
Weight	51 lb (23.1 kg)
Packaging Info
Package Weight	51 lb

2262H Differential Drive low-frequency driver

2432H high-frequency compression driver

Large PT Progressive Transition waveguide for excellent pattern control and low distortion

Rotatable waveguide for vertical or horizontal orientation

Bi-amp/passive switchable

Related Questions and Answers

Q: 1. Can you use this tethered with an added horizontal arm (e.g. manfrotto 131dd) attached to it holding a camera and laptop?

A: Yes, this will work with a lateral arm, but you may want to get a tripod with a higher load capacity. I would recommend the Benro TMA37, click the link below to view; https://bhpho.to/2CMGvIB

Q: 2. Hello, can this head fit onto the MVT502AM tripod?

A: Yes it can but you will need a 75mm half ball adapter to mount it to these legs. such as the: Manfrotto 520BALLSH 75mm Short Half-Ball B&H # MA520BSH MFR # 520BALLSH

Q: 3. Does the bubble leveler being on the plate mount prevent you from using a video head?

A: A video head with a flat base and a 3/8" screw thread would not interfere with the bubble level on the base of this tripod.

Q: 4. How does this head mount to a tripod?

A: This head mounts via a 3/8 -16 thread.

Q: 5. Does it come with a bag?

A: No, a carrying case is not included with the Manfrotto MT055XPRO3 Aluminum Tripod. If you are looking for a case that would be compatible with the tripod, I would recommend the Manfrotto MBAG80N Unpadded Tripod Bag, B&H # MAMBAG80N, for your needs.

Q: 6. Is this smaller than the 500A?

A: This head is smaller

Q: 7. Is this a video head or a Fluid Head?

A: Definitely IS a fluid head. The description on this page is poorly written. Look at the the Manfrotto site and it is specifically titled as a "XPRO Fluid Two-Way Tripod Head with Fluidity Selector." "Adjustable fluidity on tilt movement for smoother shooting; Professional fluid drag for pan and tilt movements."

Q: 8. What is the base diameter on the Manfrotto MHXPRO ?

A: The base diameter of the Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head is 2.25 inches which translates to about 57mm

Q: 9. Do the legs, at least the lower sections, have measurement markings?

A: No the legs do not have measurement markings (I just double-checked). I will say this, though, I use my tripod nearly every day and it works fabulously. Good luck!

Q: 10. Is there a Clamp Adapter for this head that would make it compatible with Arca-Swiss type plates?

A: There is no clamp adapter for the Manfrotto 808RC4 3-Way, Pan-and-Tilt Head with 410PL Quick Release Plate that will accommodate an Arca-style quick release plate.

There are no reviews for this product.