The white AM7315/95 3-Way Loudspeaker System with 1 x 15" LF Speaker from JBL is a high-power, lightweight, 3-way, full-range loudspeaker. It is comprised of the JBL Differential Drive, dual voice coil and dual magnetic gap 2265H 15" low frequency driver, an 8" CMCD-82H cone midrange Differential Drive dual voice coil internal compression driver, and the 2432H high frequency 1.5" exit, 3" voice-coil compression driver. The large format Progressive Transition (PT) waveguide provides 90° x 50° coverage. The waveguide is rotatable so the loudspeaker system can be used in either vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.

The enclosure is constructed of multi-ply Finnish birch and is coated in JBL's DuraFlex finish, which is heavily braced to maximize low-frequency performance. The trapezoid enclosure is fitted with thirteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent black foam backing to provide additional driver protection and give a professional appearance.

The AM7315/95 will perform as either a bi- or tri-amped cabinet at the flick of a switch, making it versatile for many sound amplification applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live clubs, dance clubs, sports arenas, and themed entertainment venues.

2265H Differential Drive 15" low-frequency driver

CMCD-82H cone midrange compression driver with integral 8" diameter Differential Drive dual voice coil internal driver

2432H 1.5" exit high-frequency compression driver with 3" voice coil

Large PT Progressive Transition waveguide for excellent pattern control and low distortion

Rotatable waveguide for vertical or horizontal orientation

Bi-amp/tri-amp switchable

Related Questions and Answers

Q: 1. Does this tripod works with the 322RC2 head?

A: Yes this would work with the 332RC2 head perfectly fine since it is a standard 3/8" thread.

Q: 2. Does anyone know why they shortened the height on this newer model from the old Manfrotto Pro 055XPROB? The new one only extends to 66.9 whereas the old version goes up to 70.3 , side by side the new one is actually taller at the base but the center column is much taller on the older version, which is why the the height is taller so did they shortened this column for stability reasons?

A: I never raise the center column. On several of my tripods I cut the center post so I can get closer to the ground for micro work with plants. However this has been the best Manfrotto tripod I've used.

Q: 3. Will this tripod work with the Really Right Stuff BH55 ball head? I am looking for something that will support my sigma 150-600

A: Yes, the Really Right Stuff BH-55 Ball Head will fit the Manfrotto MT055XPRO3 Aluminum Tripod.

Q: 4. waht is the warranty for this?

A: This tripod would come with a 6-Month Warranty, but gets Extended to 10 Years with Online Registration.

Q: 5. Would this head work on the Manfrotto Befree tripod?

A: As long as the tripod has a flat top with a 1/4 screw it will work but this is a pan/tilt head, larger and heavier than a regular ball head.

Q: 6. Is the plate ARCA type?

A: No, but it is adaptable to arca-swiss. I use a "Haoge Quick Release QR Clamp Adapter Convertor for Manfrotto RC2 System to Arca-Swiss Compatible" ... you'll have to search for it. I have it permanently installed on this head for use with my standard Arca Swiss plates.

Q: 7. Hello,I am new to tripods and I was advised to buy the Manfrotto 055CXPRO4 Carbon Fiber Tripod along with this particular head. Is that a good/compatible combination?I was also advised to buy additional quick release plates. I will need one each for a Canon EOS 1DX, a Canon 7D and the Canon EF 100-400mm f/4.5-5.6L IS USM Lens. Please could you give me the information on the appropriate/compatible quick release plates? Thank you.

A: Yes. The 055CXPRO4 tripod would work well in combination with the 808RC4 head.For additional plates, I would recommend getting these:Manfrotto 410PL Quick Release Plate - for RC4 Quick Release SystemB&H # MA410PL ? Mfr # 410PLThese will work underneath your two cameras, as well us under the foot of your 100-400mm.

Q: 8. What are the differences between this and the 190XPRO4?

A: The 055XPRO3 is a sturdier tripod. I needed a relatively inexpensive tripod for a 300 2.8 and the 190XPRO4 was too light and allowed for too much vibration. The 055 is still on the light side for the lens, but gets the job done without spending a lot more on a sturdier tripod

Q: 9. There is no picture but where it says the center color tilts 90 degrees horizontally from the normal vertical stature that means the center pole extends up and tilts to the side correct?

A: Yes. I just checked and it does that. I will send a picture separately.Michael

Q: 10. Does the 808RC4 have retractable handles like the X-Pro 3-way? That feature would make it much easier to fit in a tripod bag.

A: No, the handles do not retract...but they can be removed (unscrewed out).