The AJA Ki Pro Rack is a tapeless, file-based video recorder that captures and records in ready-to-edit ProRes and DNxHD codecs, in 10-bit 4:2:2 full-raster files, and onto HDD or SSD storage modules (sold separately). 10-bit 4:2:2 color depth provides superior dynamic range, original picture representation, and flexibility in adjusting color and balance in post. Two slots are available for the storage modules.

Ki Pro features RS-422 control for integrating with editing systems, external controllers, and with tape decks (to capture tape-based media as ProRes). Also by RS-422, assemble edits can be sent direct to storage modules, often faster than rendering to ProRes or DNxHD.

The panel controls are for the most part identical to those of tape decks. The display screen and operating system work hand-in-hand to facilitate full configuration without any connection to a separate computer: all information is displayed clearly on the screen and the OS control menu is a fast and flat one.

The set of connections is diverse and includes video and audio ports that are the same kind as those of tape decks. Accordingly, the Ki Pro is compatible with the cabling and routing systems used with tape decks. Also available is an Ethernet port by which files can be transferred (minimizing the need for staff involvement and allowing better employment of staff).

Up/down/cross conversion can be performed right inside the hardware, both during recording or playback. A second device won't be needed for conversions.

As for remote control, the Ki Pro can be fully configured and controlled via a web browser per an IP address assignment. Multiple Ki Pro Racks can be networked together for control over a single interface.

File-Based Recording / Playback    Ready-to-Edit File Capture    Records 10-Bit 4:2:2 ProRes / DNxHD    Records onto HDD/SSD Storage Modules    Hardware Up / Down / Cross Conversion    Broad RS-422 Integration    IP Assigned Web Control / Configuration    Tape Deck Style Panel Controls    Fits Standard Cabling / Routing System    1RU Rack Height

• File-Based 10-bit 4:2:2 full-raster video recorder
• Captures in "ready-to-edit" ProRes and DNxHD files
• Records direct onto optional HDD/SSD storage modules
• Internal up/down/cross conversion during recording/playback

• Panel controls are about identical to those of tape decks
• Full configuration via display screen and OS flat control menu
• RS-422 integration with editing systems / controllers / tape decks
• Assemble edits can be sent directly to storage modules over RS-422
• Control and configuration can fully be remote via web per an assigned IP
• Multiple Ki Pro Racks can be networked together for control over a single interface

Related Questions and Answers

Q: 1. What’s the difference between 3s and 3s pro?

A: The PRO unit comes with several additional accessories, including a carrying case.

Q: 2. Must the SmartSling handle be attached to the gimbal to work or can it operate wirelessly (not attached to the crane)?

A: The smart handle must be attached to the system.

Q: 3. Is this compatible with the Canon Cine-Servo line of lenses, such as the 17-120 and the 25-250?

A: No. This is only compatible with ENG lenses and does not support "Cine" servos.

Q: 4. I'm confused, are there any accessories--especially for a 2nd operator--that the 3S PRO kit does NOT include? Also, can the image transmitter be used to transmit signal without the gimbal?

A: Yes The Transmount is capable of being used without the gimbal. In regards to accessories for a 2nd operator that will depend on what you want the 2nd operator to do. If you want the 2nd operator to have gimbal control (pan/tilt/roll) then the 2nd operator will need a tablet/smartphone with the Zhiyun-Tech app installed on it. They may also want a tripod as it makes controlling the pan/tilt much more natural. If the 2nd operator is pulling focus then you will need some additional accessories. 1. The Crane 3S Pro does not include the wireless control for focus you will need Zhiyun-Tech TransMount Motion Sensor Remote Control for WEEBIL-S & CRANE 2S/3S (BH #ZHGMBCOB05 • MFR #GMB-COB05) 2. the built in transmitter is fairly quick but it is not 0 delay which may throw off the focus puller. Some people may be able to compensate for this but even though the delay is very small it can throw people off when trying to pull focus. you may want to invest in a 0 delay wireless video solution such as a Teradek ACE

Q: 5. Can you vary the zoom speed by varying the pressure on the rocker switch or is zoom speed set (at a static rate) by the dial?

A: No. Changing pressure on the rocker does not affect the speed. However, this is actually a plus. You can move the speed dial with one finger while pressing the rocker. This may sound awkward but actually is not. By designing the rocker in this fashion, it prevents you from accidentally changing the pressure on the rocker and creating an uneven zoom. I'm entirely pleased with the design. I have other zoom controls that are pressure sensitive that are not as effective.

Q: 6. Hello. the Elinchrom EL-Skyport Transmitter Plus HS allows to regulate the firepower from the same control at the head ELC PRO HD 500? because Skyport screen option of selecting only the HD 1000 PRO ELC you look.I appreciate the response.

A: The transmitter does have control of power and does display the ELC500. You can see that in the manual on page 11. The link for the manual is http://bit.ly/1Nc8TMV.

Q: 7. I this gimbal compatible with the Sony FX3?

A: Here is a list of compatible cameras for the Zhiyun Crane 3S. https://oss.zhiyun-tech.com/zyplay/instructions_edit/supportmodel/CRANE%203S%20Camera%20Compatibility%20List%20-%20(EN).pdf

Q: 8. How much does this unit weigh? I'm assuming my Easyrig Minimax cannot support the weight of this gimbal and my Canon C200.

A: This weighs 5.45 pounds and supports up to 14.3 pounds.

Q: 9. Will this work for a GH7? I know it's pretty light and this is my first Glidecam purchase.

A: Yes it should. The XR-Pro has a load capacity between 0 to 10 pounds, you are able to use light weight cameras with this stabilizer.

Q: 10. Are the zoom and focus control compatible with panasonic cx-350 USB?

A: We are not aware of this being able to control the zoom and focus on a camcorder like the CX350.