The 3-9x40 Crossfire II Riflescope (Dead-Hold BDC) from Vortex Optics is a cost-effective yet durable variable power riflescope. The 3-9x magnification is ideal for close and mid-range hunting and target practice. A nitrogen purged and o-ring sealed aluminum housing is built to perform in driving rain and extreme humidity. This model of the Crossfire II is configured with a Dead-Hold BDC reticle and low-profile capped windage/elevation turrets. A fast focus eyepiece, fully multicoated optics, and generous eye relief make the Crossfire II a full-featured scope for sportsmen.

3.0-9.0x Magnification, 40mm Objective    Fast Focus Eyepiece    Fully Multicoated Optics    1" Diameter Tube Design    Capped/Resettable W/E Turrets    1/4 MOA Windage/Elevation Adjustments    One-Piece Aerospace Aluminum Housing    Waterproof/Fogproof/Shockproof    Nitrogen Purged Interior    Dead-Hold BDC Reticle

Customized compensating reticle subtensions minimize guesswork on holdover and wind drift corrections, ideal for shooting at ranges where calculating accurate bullet drop is essential.

Fully multicoated optics and an additional anti-reflective coating on the objective and the ocular lenses ensure transmission of bright detail-rich images throughout the entire magnification range.

The one-piece aerospace aluminum housing is anodized for a durable non-reflective finish. Optical elements are held in place by machined locking rings that ensure perfect lens alignment even after intense recoil and rapid fire. Additionally, the interior is nitrogen purged and o-ring sealed, preventing driving rain and extreme humidity from fogging the optics.

This unlimited, unconditional, fully transferable, hassle free warranty is almost unheard of in the optics industry. Whether damaged by the owner or a manufacturing defect, Vortex Optics will repair or replace the scope at no charge.

Related Questions and Answers

Q: 1. Anyone used this to hold test charts out into a scene?

A: Yes, will work well for test charts.

Q: 2. Will this plamp hold a reflector?

A: It has a load capacity of 8 ounces.

Q: 3. Would this work with the Tamaron 150-600 lens on my canon 6D?

A: Hy LinnFor shure the SkimmerSack II will work perfectly with the Tamron 15-600mm lens. I'm very happy with mine.Patrik

Q: 4. Do you need to purchase a separate piece to be able to use a gimbal head?

A: No, just beans. I use poly beads.

Q: 5. The manual seems to suggest that for speedcycler mode to work, all receivers as well as the transmitter must be a multimax - that it won't work with other pocket wizards as receivers. Is that true?

A: For SpeedCycler, you can use any MultiMAX or a MiniTT1/FlexTT5/FlexTT6 with an AC3 ZoneController as the transmitter. For receiving radios, you can use any radio that has Zones, such as the Plus III, Plus IV, MultiMAX, and PowerMC2. With the ControlTL, you can have 3 Zones and with the original MultiMAX, you can have 4 separate Zones. With the MultiMAX II, you can use either 4 Zones or up to 16 remote groups as it can use Channels instead of Zones. You could also use PlusX or older Plus radios as receivers as well, for up to 10 remote groups.

Q: 6. Will it fit on any round head flash like Godox V1?

A: No, the Profoto OCF II Snoot is for Profoto lights that use the OCF connection. It does not work on the Godox V1.

Q: 7. Will this work with the Olympus 900 and 600 flashes ? J. Payne

A: It is possible with a receiver on the flash.

Q: 8. Can I remove clamp and attach it to threaded mountpoint?

A: While the clamps are removable, they cannot mount onto a threaded mounting point.

Q: 9. Will this work with the older Profoto lights, such as the Compact 300?

A: This Profoto OCF II Snoot is only compatible with the Profoto OCF series monolights within the B1 and B10 series.

Q: 10. Will this work with my HIVE Wasp and Hornet lights?

A: Yes, the Profoto OCF II Snoot is compatible with the HIVE LIGHTING Hornet and HIVE LIGHTING Wasp LED Lights as they both conform to the Profoto Speed Ring standard.