The white EVF-1152D Single 15" 2-Way Full-Range Outdoor Loudspeaker System from Electro-Voice is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the DH7N 3” titanium compression driver, coupled to a Constant Directivity 60 x 60° waveguide. The system also uses DVX3151A 15” woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.

The trapezoidal enclosure is constructed of weather-resistant birch, and coated with fiberglass for maximum protection from extreme outdoor elements. Thanks to the fiberglass finish and IP55 rating, this loudspeaker can be used in harsh environments. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. A 70.7/100V transformer kit can be easily mounted to the input panel for use in distributed systems.

The system offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector and CDG dual-gland-nut input panel cover. In addition, an externally accessible jumper selects passive or active operation.

DH7N 3" diaphragm and 1.4" exit pure titanium compression driver

DVX3151A 15" LF transducer with a fully symmetric drive

Comes with a Phoenix-style connector and CDG dual-gland-nut input panel cover

Fourth-order crossover network with HF protection

Coverage pattern of 60 x 60° and Constant Directivity 12" rotatable waveguide

100 dB sensitivity and 134 dB maximum SPL

Twenty-two M10 threaded suspension points

Related Questions and Answers

Q: 1. Is it only for use outside

A: This light can be used with the included battery or plugged into an AC outlet using the Godox AC Adapter for AD600Pro Witstro Outdoor Flash B&H # GOAC26 https://bhpho.to/2QFKZXl

Q: 2. Does the Godox AD600 Pro come with a carrying case?

A: Unfortunately it does not include a carrying case.

Q: 3. What's the best way to run this strobe on a C-stand? The baby pin of my C-stand doesn't go far enough into the Godox in order for the baby pin's dimple to align with the tightening screw of the Godox.

A: You can still use a pin on the grip at the end of your extension arm, but I would recommend the Avenger E250 Long Double 5/8" Baby Pin, BH # AVE250. This model has a notched end which will have a better fit with the AD600 Pro. https://bhpho.to/2FCKgSs

Q: 4. Does it come with an umbrella or soft box?

A: It does not come with an umbrella or softbox. Those would be optional accessories. When shopping our site you can always see what is included with an item by viewing the overview tab and finding the “In the Box” listing located on the right hand side of our web page. We also list a few options for umbrellas and softboxes under the Accessories section.

Q: 5. Can you use more than one of these at the same time? Can I use this with an AD400 too?

A: Yes, you can trigger more than one AD600 Pro or AD400 Pro unit. Each unit should be on their own channel and group to fire and/or control the output.

Q: 6. When do I update the firmware and how often does it need to be updated?

A: To download the most recent firmware update from Godox, you would visit their website and go to their Downloads webpage from their menu bar. The Downloads page is listed on the link included below. You would then search for the AD600 on the webpage, then click the green arrow in the Downloads column next to the AD600 on the webpage to begin your download. It only requires updating when a new update is released by Godox, or if you are having issues with your flash.a href= http://www.godox.com/EN/Download.html target= _blank http://www.godox.com/EN/Download.html/a

Q: 7. Is the Flash duration T.01 or T.05?

A: Godox uses T0.1 for its measurements of the Godox AD600Pro Witstro All-in-One Outdoor Flash (B&H # GOAD600PRO) and other flashes that they make.

Q: 8. Are the batteries interchangeable with the Godox AD600BM Flash?

A: The batteries are not interchangeable.

Q: 9. How can I get replacement screws for the Bowens adapter?

A: You would have to contact the manufacturer for those screws.

Q: 10. Can i use this together with canon Flashes at the same time?

A: If the Canon flashes have a Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC , they can be fired along side this monolight.