The black C3108-96 Two-Way Passive Speaker System from RCF features Constant Matching Design technology for optimal transition between the high frequency horn polar pattern and the low frequency woofer directivity. The horn can be rotated, allowing the loudspeaker to be installed either vertically or horizontally. The high-frequency transducer in this system is a 1” compression driver with 1.5” voice coil for smooth, wide dispersion and features an 8” woofer with a 2” voice coil for low frequency signals.

The system includes a high-level crossover network that features the LICC (Low Impedance Compensated Crossover) that offers delay reduction, reduced phase shift, and superior transient response. Dynamic high-frequency driver protection is accomplished with the Active Mosfet Compression Driver Protection System (AMCDP) that complements the driver power curve.

The cabinet is made of Baltic birch and is equipped with top and bottom multiple plates for either wall or suspended mounting with chains. The steel front grille is protected with a double layer polyurethane fabric. Connections are made through two Neutrik Speakon NL4 connectors (audio input and parallel link output). It is suitable for use in permanent installations such as main reinforcement in small spaces, high-level AV playback, zone delay and fill systems, or under balcony installations.

Features an 8" high-output woofer and a 1" compression driver

90° x 60° CMD (Constant Matching Design) constant directivity horn

Rotatable horn for horizontal mounting

Trapezoidal enclosure made of 12mm birch plywood

HF driver with Active Mosfet Compression Driver Protection (AMCDP)

Low Impedance Compensated Crossover (LICC)

Rigging inserts: 6 x M8 (rear), 2 x M10 (lateral)

Features multiple plates on top and bottom for either wall or suspended mounting with chains and includes installation points on its rear panel as well

Easily rotatable front RCF logo

Related Questions and Answers

Q: 1. Is the i60a equipped with a battery magazine like that of the BM-01 or BM-02?

A: No it does not. It takes four AA batteries but is set up like the i40 so each battery needs to be loaded individually.

Q: 2. Does Nissin have an Air Commander for the Fuji cameras?That can be used with the i40 or i60A?

A: Unfortunately, no, Nissin does not currently have an Air 1 Commander compatible for use with Fujifilm's TTL system.

Q: 3. I have the Nissan i40 for Fuji. My longest lens is the Fuji 50mm f2. With the exception of availability of the Air 1 and an external power supply, is the i60A and better?

A: The i60a will give you more power than the i40. Guide number of 60 vs. a guide number of 40. It has some additional features which give you more control as well. If you plan on doing off camera wok, then the i60A has a built in receiver for use with the Air 1 Commander. The i40 does not have this feature.

Q: 4. Will this work with air 1 commander on nex-6 off-camera?

A: Yes. The i60A has the built in receiver just like the Di700A so it will work with the Air 1 Commander for Sony. This flash is expected to ship in mid May so please place your order now to insure that you will get one when they begin shipping. This will be a very popular flash.

Q: 5. Is there currently a battery pack that will work well with the Nissin i60a for Fuji?

A: Yes, This Nissin PS 8 will work with it. You will need to use the Sony cord as the Nissin i60A for Fuji uses the same cord as the Sony system.

Q: 6. anyone got this to wirelessly trigger in HSS mode on panasonic cameras (I have the GX8 and G85)? If so is there any shutter speed limitation in HSS mode below the max shutter speed of the camera? Actually- how do you trigger this is wireless RF 2.4Ghz mode as I do not see a transmitter device to go with this..? Thank you

A: We have the Olympus MFT EM-1 MARK II and use the Nissin Air Commander in HSS mode to the maximum shutter speed. I would think it would be the same with the Panasonic MFT. Here is a link to the Nissin Air Commander which fastens on the hot shoe of the camera to trigger the i60A off camera:https://a href= http://www.bhphotovideo.com/c/product/1298921-REG/nissin_nda1_ft_air_1_commander_for.html target= _blank www.bhphotovideo.com/c/product/1298921-REG/nissin_nda1_ft_air_1_commander_for.html/a

Q: 7. Does anybody know the guide number for this flash, Nissin i60a at 35mm and ISO 100?

A: 32 Meters; 105 Feet

Q: 8. I have the Fuji X-T2 on pre-order and I own the X-T1 and X-T10. Will the i60 be capable of high speed sync in TTL mode on any of these three cameras?

A: No, it will not work in High speed sync on any Fujifilm camera at the moment in manual or TTL.

Q: 9. Are the i60a flashes that are shipping now updated with the firmware that will allow them to be used with the xt2?

A: The one I've received 5 days ago on Sept 27 has the firmware.

Q: 10. Does the Nissin i60A include a diffuser?

A: There is one built into the flash that pulls out but it doesn't come with a separate piece that clips on the front.