You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Electro-voice Evf-1152s Single 15" 2-way Full-range Semi-outdoor Loudspeaker System (pi-weatherized, Black)

Electro-voice Evf-1152s Single 15" 2-way Full-range Semi-outdoor Loudspeaker System (pi-weatherized, Black)
  • Product Code: ga267978
  • Availability: In Stock

$8,804.85 $12,502.89

The black EVF-1152S Single 15” 2-Way Full-Range Semi-Outdoor Loudspeaker System from Electro-Voice is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the ND2B 2” titanium compression driver, coupled to a Constant Directivity 90° x 40° waveguide. The system also uses SMX2151 15” woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.

The trapezoidal enclosure is constructed out of weather resistant birch, and coated with EVCoat for maximum protection from the elements. This PI-weatherized loudspeaker system is rated for outdoor exposure only in protected areas such as under a roof overhang. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. The loudspeaker offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector and included gland-nut cover plate. In addition, an externally accessible jumper selects passive or active operation.

Parameters
Frequency Response-3 dB: 70 Hz to 14 kHz
Frequency Range-10 dB: 41 Hz to 18 kHz
FrequencyReceiver High Pass: 45 Hz
Axial Sensitivity101 dB (1 W / 1 m)
SPLMaximum Calculated: 134 dB
CoverageHorizontal: 90° (or 40°)
Vertical: 40° (or 90°)
Power Handling500 W continuous, 2000 W peak
RatingActive
Continuous: LF 400 W / HF 40 W Peak: 1600 W / 160 W
Low Frequency TransducerSMX2151, 15" (381 mm) driver
High Frequency TransducerND2B, 2" (51 mm) diaphragm compression driver
Crossover Frequency1450 Hz
Nominal Impedance8 Ohms
Minimum Impedance6 Ohms
ConnectorsDual four-pin contact 10 AWG Phoenix/EuroBlock style screw terminal
Gland-nut with included input panel cover plate
Enclosure13-ply birch weather-resistant PI-finished
GrilleStainless steel with hydrophobic cloth
Suspension22 x M10 threaded suspension points
Dimensions30.26 x 18.5 x 18.37" (768.6 x 469.8 x 466.6 mm)
Weight70.9 lb (32.2 kg)

ND2B 2" diaphragm and 1.4" exit pure titanium compression driver

SMX2151 15" LF transducer with a fully symmetric drive

Fourth-order crossover network with HF protection

Coverage pattern 90° x 40° and constant directivity 12" rotatable waveguide

101 dB sensitivity and 134 dB maximum SPL

Twenty-two M10 threaded suspension points

Comes with a Phoenix-style connector and a gland-nut with input panel cover plate (included)

Related Questions and Answers

Q: 1. Will the Nikon trigger work with the Leica SL2S?

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras (BH #GOXPRON) will work but only manually with the Leica SL2-S Mirrorless Camera (BH #LESL2S). We recommend using the Godox XPro II TTL Wireless Flash Trigger for Leica Cameras (BH #GOXPROIIL). Using the Godox trigger for Lecia will give you the best performance.

Q: 2. What kind of carry bag does it come with?

A: This light includes a small soft case.

Q: 3. It's circular so I'm wondering if any of the Profoto modifyers with the rubber would fit around it. Has anybody tried this yet?

A: No, it will not fit.

Q: 4. Does this come with a AC adapter? If not is one available? It does mention one in the specs.

A: This unit does not come with an adapter, you can purchase an ac adapter seperately. Click the link below; https://www.bhphotovideo.com/c/product/1475384-REG/godox_ac400_ad400pro_ac_adapter.html

Q: 5. Since this has a Bowens mount, is it possible to use Godox mount softboxes with this strobe?

A: The Godox softboxes use the Bowens mount yes this will fit.

Q: 6. What is the length with the battery and reflector attached?

A: The measurements including the reflector and battery is as follows: H: 9.6 x W: 4.9 x L: 15"

Q: 7. Does it come with the repositioning handle?, cause mine did not

A: Mine came with the handle installed. Received it on July 25, 2018

Q: 8. In HSS mode, at 10 feet from subject, with ISO 100 1/8000 speed, what f-stop will render good exposure ? In general, what max distance we can shoot in HSS mode at f16 1/8000 sec ? How many f-stop lost during HSS compared to normal flash sync ?

A: For every stop of shutter speed you will lose a stop of light , If at 10" full power gives you f-22 at 1/200 of second you are looking at f-2.8

Q: 9. Can I use it Canon R5?

A: Yes, A commander is needed in order to do. Please review the following item Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC • MFR #XPROC https://bhpho.to/2EoHkHG

Q: 10. Does this Monolight have TTL?

A: Yes, Several TTL systems including Canon, Nikon, Sony, Fujifilm, Olympus, and Panasonic options.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Rcf 15" 800w Weatherproof 2-way Speaker System

$3,897.00 $5,416.83

Rcf 8" 100w Weatherproof 2-way Speaker System

$2,397.00 $2,972.28

Products You May Like

Hoya Fog Diffuser 1.0 (62mm)

$101.97 $123.38

Canon Ef 17-40mm F/4l Usm Lens

$1,797.00 $2,318.13

Billingham S2 Divider Set (olive)

$72.00 $97.20