The white EVF-1152S Single 15” 2-Way Full-Range Indoor Loudspeaker System from Electro-Voice is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the ND2B 2” titanium compression driver, coupled to a Constant Directivity 90° x 60° waveguide. The system also uses SMX2151 15” woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.

The trapezoidal enclosure is coated with EVCoat for maximum protection from the elements. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. The loudspeaker offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector. In addition, an externally accessible jumper selects passive or active operation.

ND2B 2" diaphragm and 1.4" exit pure titanium compression driver

SMX2151 15" LF transducer with a fully symmetric drive

Fourth-order crossover network with HF protection

Coverage pattern 90° x 60° and constant directivity 12" rotatable waveguide

101 dB sensitivity and 134 dB maximum SPL

Twenty-two M10 threaded suspension points

Comes with a Phoenix-style connector

Related Questions and Answers

Q: 1. Will this head fit on my Sunpak Ultra 6000 PG tripod?

A: Yes, if your sticks have a 3/8 thread. I don't know anything about those sticks, but I know this head has a standard thread.

Q: 2. Could I remove the center column and replace it with a Manfrotto Leveling Center Column with 50mm Leveling Ball?

A: The center column on the Manfrotto MT055XPRO3 Aluminum Tripod can be removed and replaced with the Manfrotto 555B Leveling Center Column - for 055 Pro and 3021 Pro Tripods, BH #MA555B.

Q: 3. There is no picture but where it says the center color tilts 90 degrees horizontally from the normal vertical stature that means the center pole extends up and tilts to the side correct?

A: Yes. I just checked and it does that. I will send a picture separately.Michael

Q: 4. Is there a carbon fiber version of this tripod? If so, what are the specs...and the price?

A: The Manfrotto MT055CXPRO3 would be the carbon fiber version of the MT055XPRO3. At the time of this posting, the kit with the MHXPRO-3W head would be $588.95. You can find the specs for the tripod, on its page on our site.

Q: 5. How can you adjust the level of this Tripod? Is it only by adjusting the legs back and forth, or is there an easier way to do it?

A: The legs have multiple adjustment points. You may choose to extend both of the sections for the longest leg reach or just one of the sections for shorter legs. Also, the center column, the one your camera it attached to, is adjustable. So you can fully extend the legs and the center column for a very tall shot.

Q: 6. Will this head fit on 3021 Manfrotto legs?

A: As long as the tripod has a flat top with a 1/4 screw this head will fit.

Q: 7. Are there any tripod heads that are for photography and videography that dont compromise on quality? Been looking at Manfrotto but have seen mixed reviews.

A: Fluid heads are great for video because they allow for smooth panning motions which is desirable for professional looking footage. For photography, it will work, sure. Having been using DSLRs for over 20 years, I prefer the versatility of a ball head any day over a fluid head. If you take more pictures, use a ball head. If you do video mostly, get a fluid head. There are inexpensive ball heads out there. This fluid head is very well built and is smooth as butter.

Q: 8. Does this tripod works with the 322RC2 head?

A: Yes this would work with the 332RC2 head perfectly fine since it is a standard 3/8" thread.

Q: 9. I saw the 808RC4 here is provided with a 3271 QR plate. Is there any difference between it and the 410PL? Do I have to buy the 410PL? Thanks

A: The 3271 plate is the same as the 410pl (both are referred to as RC4 type) plate. Thank you for pointing this out, I will have our webteam update this site to reflect the proper plate number.

Q: 10. Does the bubble leveler being on the plate mount prevent you from using a video head?

A: A video head with a flat base and a 3/8" screw thread would not interfere with the bubble level on the base of this tripod.