The Elite Tripod CT-3372 M2 Rapid from Feisol is constructed using CNC milled 6061-T6 aluminum and high-grade carbon fiber legs that make the tripod a lightweight 3.9 lb. By unlocking the twist locks, the 3-section tripod can reach a maximum height of 58.9", and with the 3 variable leg angles of 25, 50, and 75°, the support can go as low as 4.1". Feisol's Rapid anti-leg-rotation technology does not allow the legs to twist when fully extended. Because of the 66 lb weight capacity, the tripod supports mirrorless to large format cameras for professional applications. Additionally, the legs fold 180° in the reverse, which makes it a compact 24.8", and the built-in bubble level ensures that your horizon is aligned every time.

Load Capacity: 66 lb    Maximum Height: 58.9"    Minimum Height: 4.1"    Folded Length: 24.8"    Leg Sections: 3    Weight: 3.9 lb    Reverse-Folding Carbon Fiber Legs    Twist Locking, Rapid System Legs

The tripod has a load capacity of 66 lb, a maximum height of 58.9", and a minimum height of 4.1"

The 3-section tripod has reversible folding legs, which folds to a length of 24.8"

Integrated bubble level at the yoke of the tripod

CNC milled 6061-T6 aluminum with carbon fiber legs make it lightweight and weighing 3.9 lb

Twist locks with Rapid anti-leg-rotation technology

Variable leg angles of 25, 50, and 75°

Related Questions and Answers

Q: 1. What is the diameter of the base?

A: The base diameter of the CB-40D is 60 mm / 2.4 inches.

Q: 2. Can the quick release plate attached to the head be removed easily? I am considering replacing the quick release with a lever release.

A: Yes, I find the plate to be very easy to remove. I use the Feisol tripod, ballhead and release plate with my Nikon D610 and various lenses. My most commonly used lens is a Tamron f.8, 24-70 zoom. To remove the plate one only needs to loosen the thumb set screw slightly, and slide the plate out. There is a safety lock, with a button release, which keeps the plate from sliding out on its own. The button is easy to push which sliding the plate. A single-lever release may be slightly faster (I have one on a different tripod), but the Feisol unit is very well built and the slide will not drop out accidentally unless the set screw is pulled back. All said, this is a fine piece of equipment.

Q: 3. With Feisol CT-3441T tripod, would you be able to reverse fold the legs without splaying?

A: Hi Andrew - there is only minimal splaying with the CB-40D and the CT-3441T still fits in the bag which comes with it.

Q: 4. do i need to purchase a plate w/ this tripod (ie, the thing that attaches to my camera) or does it come with it?

A: The QP-144750 Quick Release Plate is included with the FEISOL CB-50DC Ballhead.

Q: 5. Can I connect this to any tripod? I have a 20-25 year old very good and solid BOGEN Tripod. Will this connect to this tripod?

A: You'll need to check the thread diameter in your tripod just to be sure. It's hard to answer without knowing at least a model number. This is a standard attachment and should work in most cases.

Q: 6. I just received my Feisol CB-50DC but I can't seem to free up the ball head. It's jammed. Is there something I am missing?

A: The only thing I can think of might be to adjust the friction control dial located near the bottom of the barrel.

Q: 7. Hi, i would greatly appreciate your advice on what video head to use with this tripod.I was interested in the Manfrotto 701 HDV but i cant seem to find it anywhere online and some sites like CVP says that it is a discontinued stock.What other video head would you recommend that works best with this tripod?Im mostly going to be shooting on dslr (7D)Thank you for reading this,Regards

A: We recommend the Manfrotto 502HD Pro Video, B&H # MAMVH502AH, http://bhpho.to/JANiwX. This head would bolt directly to the 755CX3 MagFiber Video Tripod Legs.

Q: 8. Can I use a Manfrotto 200PL quick release plate?

A: The Manfrotto 200PL will not work with this ball head. You need an Arca-style quick release plate like the FEISOL QP-144750.

Q: 9. Would the BlackRapid Arca-Swiss compatible plate work with this head?

A: I believe so. The Feisol head is designed to use any form of Arca-Swiss type plate, although there is an additional safety locking tab that may be proprietary. It will not prevent you from using the BlackRapid plate, but you may not be able to take advantage of this feature.

Q: 10. Is the FEISOL QR system compatible with the Kirk collar for the Nikon 80-400 mm ED lens and the Sunwayfoto L-bracket for the Nikon D600/610? This may seem to be a trivial question, but not all Arca-Swiss-compatible systems are truly compatible. Many thanks.

A: Yes it is compatible with the Kirk collar and the Sunwayfoto bracket.