The Kramer MV-6 3G HD-SDI Multiviewer is a versatile, high-performance multi-viewer for 3G HD-SDI video signals. It can display up to 6 inputs in any combination and output the image in SDI, HDMI, and CV formats. Both pre-programmed and customizable screen divisions are supported.

Maximum Data Rate of up to 3 Gbps    SDI, HD-SDI, & 3G HD-SDI Multi-Standard    Kramer re-Klocking & Equalization    Ethernet & RS-232 Control

Maximum input data rate of up to 3 Gbps

HDTV compatible

Re-clocking looping inputs

Multi-Standard Operation: SDI (SMPTE 259M), HD-SDI (SMPTE 292M), and 3G HD-SDI (SMPTE 424M)

Multi-Video Output Formats: 3G HD-SDI (SMPTE 424M), HDMI & composite, scaling, refresh rate, and video standard conversion

Front Panel Preview Screen: 16:9, 4.3" (10.92 cm) color LCD displaying the output of the unit

Kramer re-Klocking & Equalization Technology rebuilds the digital signal to travel longer distances

Flexible Control Options: Front panel with 2-row LCD, OSD, Ethernet, and RS-232 (supplied with PC control software)

Screen Handling Buttons: Freeze, size, position, and 4 pre-programmed and 2 user-definable layouts

Worldwide Power Supply: 100 to 240 VAC

Standard 19" (482.6 mm) rack mount size; 2U rack ears included

Related Questions and Answers

Q: 1. Does this come with a D-Tap power cable like the other model?

A: The PORTKEYS LEYE 3G-SDI & HDMI 2.4" LCD Electronic Viewfinder does not include a DTap power cable. Please see the cable options below for powering the LEYE. PORTKEYS D-Tap to Locking 4-Pin Power Cable for BM5 Monitor (3.28') BH #POBM5DTAPPC https://bhpho.to/3JYfUID or Kondor Blue D-Tap to Canon LP-E6 Dummy Battery Cable (Kondor Blue, 16-36") BH #KODTAPCLPE6 https://bhpho.to/406kNF5

Q: 2. Can monitor take a V mount batt? If so how?

A: Yes ,please buy v-mount battery plate through link:https://a href= http://www.bhphotovideo.com/c/product/1200704-REG/lilliput_v_lock_battery_plate_battery_mount_plate_for.html target= _blank www.bhphotovideo.com/c/product/1200704-REG/lilliput_v_lock_battery_plate_battery_mount_plate_for.html/a

Q: 3. Is this an IPS monitor? Or a TFT monitor with 6-bit?

A: This is a newly announced unreleased item whose specs are subject to change at any time. When it actually arrives, we will have a much better idea of what it has and how it does what it does.Since the BM Video Assist is touch screen, that suggests to me that it is IPS since non IPS screens show tailing when touched.We shall see soon.

Q: 4. Is there a windows version to this device that will use usb C or usb 2.0/3.0?

A: You should consider the Blackmagic Web Presenter HD or the Blackmagic ATEM Mini Switcher. The Web Presenter has both HDMI and SDI the ATEM Mini Switcher is less expensive but only has HDMI.

Q: 5. I got Dji fantom 2vision=, nied monitor ?

A: The DJI Phantom 2 Vision works with an IOS or Android smart phone for live monitoring.

Q: 6. Best battery to last long time connected to 12volt input ?

A: I don't exactly know the power consumption of the unit, but I suspect it is in the neighborhood of 1 Amp at 12 VDC. The use of 2 LP-E6 batteries on the back gives me all the time that I would want to shoot in one day...they recharge easily overnight. A spare pair lives in my bag, already charged. The 12 Volt connector on the unit will charge attached batteries. If you decide to use an external battery, you would have to mount it somewhere and have the correct cable to make it work (check polarity carefully!). I also have built a rig that powers a BMPCC camera, Small HD DP4 and B4 zoom lens from a single Gold Mount battery plate. On that rig, a 65WH battery will run all of the equipment for more than a day. Anton-Bauer and Ikan both make good batteries and chargers. Basically, Amps X Volts = Watts so, you can do comparative math and pick out a good battery system. Good luck.

Q: 7. Does it support cross conversion? Input hdmi and output SDI, and vice versa?

A: I'm afraid not. The HDMI and SDI connections will be loop-outs only. If you are looking for an affordable monitor with Cross Conversion you could consider the Lilliput Q5 5.5 , which has Cross Conversion between the HDMI and SDI connections.https://bhpho.to/2qtn7q6

Q: 8. Does this playback the recorded footage too?

A: The FeelWorld CUT6S 6" 4K 3G-SDI/HDMI Touchscreen Recorder/Monitor does not have a playback function for recorded footage.

Q: 9. Will the 12v power out of the URSA Mini power this monitor? And if so will the cables supplied with either product do the job or will an additional cable be required?

A: Since the Video Assist has just been announced, power options are still being worked out. The 4 pin XLR on the right side is one possibility. However, a power splitter would have to be made since that outlets primarily purpose to power the Viewfinder. Another solution could be powering the Video Assist via the V-mount or Gold mount battery plate D-tap outlet. It may at first have to be a custom D-tap to Video Assist cable to make this happen. Watch for further announcements regarding this product.

Q: 10. Which cameras can provide power using the cable 8.4 VDC?

A: There are many Mirrorless camera models that could work with dummy battery cables when using the 8.4v output of the FeelWorld CUT6 6" 4K HDMI Touchscreen Recorder/Monitor. Examples could be Sony A7SIII and Sony FX3.