The 240GB Go Drive Low Profile 7mm Opal 1.0 Encryption Ready SSD from VisionTek is used to store and backup data in PC, Mac, Notebook, and Ultrabook computers.

The drive is fully compliant with the rigorous Opal 1.0 specifications established by the Trusted Computing Group (TCG) so data will remain secure in the event of computer theft or loss. Being Opal 1.0 secure encrypted ensures the Go Drive complies with government and corporate data security requirements.

As Opal 1.0 utilizes the AES 128-bit hardware encryption built-into the Go Drive's controller, there's no speed reduction like that found on a non-secure drive utilizing a software-based encryption application

DuraWrite extends the drive endurance by 20x or more compared to standard SSD controllers

Advanced Wear Leveling & Monitoring distributes data evenly across the entire drive

Advanced Read/Disturb Management safeguards against data corruption by spreading read/write cycles across the flash components

Intelligent garbage collection "recycling" maintains optimal write speeds by clearing blocks of unneeded data during off-peak usage times

RAISE (Redundant Array of Independent Silicon Elements) protects the data on your drive from flash block failures without typical RAID inefficiencies

Superior error correction (ECC) protection for data retention and drive life

Suitable for corporations, government offices, financial service firms, healthcare operations, SOHO settings

No moving parts ensure silent, cool, energy efficient operation

Shock, vibration, and temperature resistance

Access time up to 50 times faster than HDD

Designed to deliver SATA 6G speeds, yet backward compatible to SATA 3G and 1.5G

DuraClass Technology allows efficient block management & wear leveling offers maximum drive and data reliability

Trusted Computing Group Opal 1.0 SSC compliance safeguards sensitive data against unauthorized access

Designed and built in the USA

TAA Compliant assures government contractors and government buyers this product is assembled in the U.S.A and is in compliance with the Trade Agreements Act

Included 2.5mm spacer to allow the SSD to better fit in a 9.5mm space

Related Questions and Answers

Q: 1. It can connect to a camera with xlr inputs, correct? The description only lists recorders and mixers.

A: Yes the Rode Wireless GO to 3-Pin XLR Male Low-Profile Cable can connect to a camera with an XLR mic input.

Q: 2. Compatible with mid 2012 I5 MacBook Pro? Are other parts needed for install?

A: Other than the drive - you will need a smalll phillips screwdriver, Tork T6 screwdriverf, Nylon Pry Tool.

Q: 3. Will this work in my HP OMEN Laptop 15-dh1050nr 15.6" Intel Core i7-10750H 16GB DDR4 512GB SSD?

A: In general we do not recommend upgrading the 2.5" drives on the HP Omen as it is a difficult notebook to upgrade. Other models of the OMEN could be done by a professional computer repair shop but you need to check with HP if this particular HP OMEN is compatible.

Q: 4. Will this particular product fit on the side of a Sony FX 30? Looking for vertical video solutions.

A: The SmallRig Low-Profile NATO Rail (2") could mount to either of the FX30's side 1/4"-20 threads, but it needs two threads to provided a sold mounting point, so it would not work well mounting diretly to either side of the camera. If you happen to have a cage on your FX30, then the SmallRig Low-Profile NATO Rail (2") would likely work better as it would have more threads to mount to.

Q: 5. Would this fit on top of the RED Komodo/Komodo-X?

A: Yes, the top of the RED DIGITAL CINEMA KOMODO-X 6K Digital Cinema Camera can fit the SmallRig Low-Profile NATO Rail (3.5").

Q: 6. Where is this item made?

A: This item is made in Taiwan.

Q: 7. What is the diameter of the tie-down?

A: The Matthews Low-Profile Mitchell Tie-Down has a diameter of 3.5 inches.

Q: 8. Can you remove the center bolt and make this a female tie-down? My head already has a bolt.

A: Yes, you can remove the bolt in the middle of the Matthews Low-Profile Mitchell Tie-Down. You will still need to use the nut to fasten the bolt securely.

Q: 9. Any idea what the max load is for this nato rail? I have it on top of my camera cage and I use it with a Nato top handle.

A: Max payload is not listed by the manufacture for this product, but if you tighten the screws provided with the nato rail to the cage, holding 10+ pounds should not be an issue.

Q: 10. What is the head diameter?

A: The Wooden Camera Low-Profile Screw's (3/8"-16) head has a diameter of 11.80mm.