Laser Projector With Hdbaset

Atlona 4k/uhd Hdmi Over Hdbaset Receiver With Control And Poe (70m)

Product Code: ga26915
Availability: In Stock

$1,106.94 $1,339.40

Qty

0 reviews Write a review

Description
Reviews (0)

Use the Atlona 4K/UHD HDMI Over HDBaseT Receiver with Control and PoE (70m) to convert an incoming HDBaseT signal to HDMI and connect it to a display or projector. This receiver offers connections for HDMI video and audio, bidirectional IR control, and RS-232 control all over a single HDBaseT connection. HDBaseT is advantageous as it allows for longer cable distances than HDMI alone, while carrying other important signals along a single cable. 4K HDMI resolutions are supported, as is HDCP 2.2 in order to play protected high-resolution content. As this receiver accepts downstream power using the HDBaseT connection, no separate power supply is required.

Receives 4K HDMI up to 230' Receives Power over HDBaseT Bidirectional IR Control Includes IR Emitter HDCP 2.2 Compliant Supports Multi-Channel Audio

Parameters
Video Resolutions	4096 x 2160 @ 24/25/30/50/60 Hz, 3840 x 2160 @ 24/25/30/50/60 Hz, 2048 x 1080p, 1080p @ 23.98/24/25/29.97/30/50/59.94/60 Hz, 1080i @ 50/59.94/60 Hz, 720p @ 50/59.94/60 Hz, 576p, 576i, 480p, 480i
VESA Configuration	2560 x 2048, 2560 x 1600, 2048 x 1536, 1920 x 1200, 1680 x 1050, 1600 x 1200, 1600 x 900, 1440 x 900, 1400 x 1050, 1366 x 768, 1360 x 768, 1280 x 1024, 1280 x 800 1280 x 768, 1152 x 768, 1024 x 768, 800 x 600, 640 x 480
Colorspace Standards	YCbCr, RGB
Chroma Subsampling	4:4:4, 4:2:2, 4:2:0
Color Depth	8-bit, 10-bit, 12-bit
Audio	Formats: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Bit Rate: Up to 24-bit
Distance	Cat 5e/6 @ 4K up to 115' / 35 m Cat 6a/7 @ 4K up to 130' / 40 m Cat 5e/6 @ 1080p up to 197' / 60 m Cat 6a/7 @ 1080p up to 230' / 70 m HDMI IN/OUT @ 4K up to 15' / 5 m HDMI IN/OUT @ 1080p up to 30' / 10 m
Signal	Bandwidth: 10.2 Gbps CEC: Pass through HDCP: Supports up to 2.2
Connectors	1 x Mini-USB type B, firmware 1 x RJ45, HDBaseT 1 x HDMI type A, HDMI output 1 x 5-pin captive screw, IR 1 x 3-pin captive screw, RS-232 1 x PoE from TX
Temperature	Operating: 32 to 104°F / 0 to 40°C Storage: -4 to 140°F / -20 to 60°C Humidity: 20 to 90%, non-condensing
Power Consumption	10.89 W
Power Supply	Input: 100 - 240 VAC, 50/60 Hz Output: 48 VDC, 0.83 A
Certifications	Power Supply: CE, FCC, RoHS, cULus, RCM, CCC Receiver: CE, FCC
Dimensions	With Ears: 1.1 x 4.7 x 3.5" / 27 x 119 x 89 mm Without Ears: 1 x 4.3 x 3.5" / 25 x 109 x 89 mm
Weight	0.7 lb / 330 g
Packaging Info
Package Weight	1.14 lb
Box Dimensions (LxWxH)	8.65 x 7.45 x 2.9"

Compatible with Ultra High Definition sources and displays
Prepares AV systems for technological improvements, 4K/UHD streaming services, and playback devices

Adheres to latest specification for High-bandwidth Content Protection
Allows protected content stream to pass between devices

Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT

Control signals travel over HDBaseT link for maximum control system flexibility

Receives HDMI signals up to 230' @ 1080p and 130' @ 4K/UHD using Cat 6a/7 cable

IR input designed to work with 12V IR receivers for source control

Placement of ports on rear panel simplifies wire management

Supports PCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS Digital Surround, and DTS-HD Master Audio
Allows any multi-channel audio stream to be used within a professional audio system

Front panel USB port provides an easy means for kit upgrades
Ensures long term system return on investment

LED indicators provide power and HDBaseT link status information
Provides easy setup and troubleshooting

Easy installation in confined spaces behind displays and above projectors

Related Questions and Answers

Q: 1. Does this support CEC?

A: Yes, the Atlona AT-HDVS-TX HDBaseT Extender with AT-HDRX Receiver Kit supports CEC.

Q: 2. Do both sender and receiver units need to be powered? Or is power required only at one end?

A: Both units need to be powered. Two AC power supply come in the box.

Q: 3. Does this come with the power supply?

A: You have two options: This kit Includes an external power supply or you can use IEEE 802.3af PoE Power Sourcing Equipment (PSE).

Q: 4. Does this kit come with the power supply?

A: Yes, the Atlona 4K HDMI over HDBaseT 2x1 Switch Wall Plate Extender Kit includes a power supply.

Q: 5. support 3d

A: Yes, according to Atlona this Matrix Switcher does support 3D renderings.

Q: 6. Does the LAN connection carry network traffic? Can I use the LAN connection to access my network?

A: According to the manufacturer, there is network control on the LAN connection.

Q: 7. If you have a projector with a HDBASET connection, can this be used to extend without using a Altona receiver?

A: Yes, If your projector has HdBaseT input you would only need to use the Atlona AT-HDVS-TX VGA/Audio + Two HDMI to HDBaseT Extender Switcher with Display to connect to your projector.

Q: 8. Does this come with both transmitter and receiver? The image shows both but the description only says transmitter.

A: A purchase of the Atlona 4K/UHD HDMI Transmitter over 100M HDBaseT with Ethernet, Control, and PoE only includes the transmitter, the receiver must be purchased separately.

Q: 9. What transmitter do I need for this?

A: This item is hard wired to a matrix switcher. Consequently, we are not sure what your question is. Please email telling us what you wish to do. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 10. Is the length of 393' (4K) per receiver or the total for all four receivers combined?

A: The limit is 393 feet per receiver.

There are no reviews for this product.