The cocoa E2 Unidirectional Earset Microphone with 1mm Detachable Cable and 3.5mm Connector from Countryman is an over-the-ear earset, similar to a classic E6 earset, but with a shorter boom designed to work with the Sennheiser Evolution wireless microphone system. It provides suitable isolation at the mouth, but with less visibility than an E6 Omni earset, and can be used to capture audio for general speaking and vocal applications.

With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are warm and natural. The element, boom, and sub-miniature connector are all easily hidden on the user's face. The boom position near the ear helps to eliminate breath pops and vocal plosives on the mic. The 1mm detachable cable terminates to a 1/8" (3.5mm) locking connector for direct connection to a Sennheiser Evolution Series (G2 and G3), EW 100, EW 300, EW 500, or SK 1093 bodypack transmitter.

For Sennheiser Evolution Transmitters    20 Hz to 20 kHz Frequency Response    For General Speaking and Vocals    Fits Over the Ear    Includes Carrying Case    Black and White Cable Clips    Windscreen and Protective Cap

The E2 Earset redefines pure sound in a virtually invisible package. It offers better ease of use than a lavalier or podium microphone.

There are two aspects of the E2 design that make it possible to capture sound so far away from the mouth: strong off-axis rejection and precisely tuned frequency response. For on-axis interference, the frequency response tuning in the connector of the E2 allows you to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band.

Like the connector for the industry-standard E6, the connector for the E2 is built tougher and more water resistant than previous models.

Lower gain, for powerful vocals requiring the highest overload.

Related Questions and Answers

Q: 1. Can you record ProRes RAW internally or only to an external monitor?

A: At this time, the Z Cam E2-M4 will only support ProRes Raw through an external recorder, through its HDMI output. http://www.z-cam.com/e2-m4/

Q: 2. does it come with the cable to connect to BMPCC?

A: Yes, the following item comes enclosed. 14V battery, 3A rapid smart charger, DC power cables for connecting to Blackmagic Design cameras

Q: 3. Does Small Rig have a cage for this camera yet?

A: Kondor Blue offers the Z Cam E2 Flagship Base Rig (M4/S6/F6/F8), BH #KOZCAMBASRIG. https://bhpho.to/3afE0wI

Q: 4. Is there an option to support Android devices or this is exclusively for iOS? Maybe an update?

A: Manufacturer only lists support for iOS at this time. We have not heard of any imminent firmware updates, but product specs are always evolving and Android support may be on its way.

Q: 5. how much does it weigh?

A: The following unit weighs 2.5 lbs.

Q: 6. how can we AC power this camera ?

A: We don't have the AC adapter from Z CAM yet but you can use a dummy battery to AC like BH #INPSY62: https://www.bhphotovideo.com/c/product/1112103-REG/indipro_tools_psy62_7_4v_power_supply_for.html

Q: 7. Does this camera put out a "HDMI Trigger" to record on external connected devices that have the function, like the Tascam DR-70D 6 INPUT?

A: the camera does output HDMI trigger flags that work on the atomos recorder. compatibility depends on the recording device, the camera sends out standard HDMI TC record trigger flags

Q: 8. Does it work with canon EF lens mount ?

A: Yes it does. You will just need the Z CAM Interchangeable Lens Mount for E2 Flagship Series (EF Mount) BH #ZCEM101. https://bhpho.to/2XOrPAd

Q: 9. Can you get standard ProRes 4:2:2 (Not ProRes RAW) when saving to an external SSD?

A: Yes, you can do ProRes HQ, ProRes 422, ProRes LT, and ProRes Proxy.

Q: 10. Does this camera come with built in ND filters?

A: No it does not come with built in ND filters