You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Sony Skb Hard Carrying Case For Pxw-z90v Camera

Sony Skb Hard Carrying Case For Pxw-z90v Camera
  • Product Code: ga26938
  • Availability: In Stock

$539.85 $685.61

Using custom-cut foam, this waterproof SKB Hard Carrying Case from Sony protects your PXW-Z90V camcorder during transport and storage. In addition to the camera itself, this case has cutouts for two extra batteries, four memory cards, a shotgun microphone with a windscreen, and other pertinent small accessories. The exterior is manufactured from a high-strength polypropylene copolymer resin that is resistant to impact and inclement weather. When closed, the rubber gasket seal keeps moisture out, while the automatic pressure valve ensures that the case is easy to open after altitude changes. Trigger-release latches are quick and easy to operate when opening and closing the case. The over-molded rubberized handle provides a comfortable grip when holding the case.

Open Box Products Have a Limited 1-Year Manufacturer Warranty    Custom-Cut Foam Interior    Waterproof, Molded Resin Exterior    Compartments for Camera and Accessories    Rubber Gasket Seal    Over-Molded Rubberized Handle    Resistant to Impact and Outside Moisture

Key Specs
ColorBlack
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeInsert with Custom Compartments, Convoluted/Layered Foam
Water ResistanceWaterproof
IP67
DimensionsExterior
18.3 x 13.8 x 6.8" / 464 x 350 x 173 mm
Interior
17 x 11.5 x 6" / 431.8 x 292.1 x 152.4 mm
Weight6.1 lb / 2.8 kg
Parameters
Camera CompatibilitySony PXW-Z90V
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeInsert with Custom Compartments, Convoluted/Layered Foam
Features
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
CertificationsMIL-STD810H
Padded InteriorNo
MaterialsExterior: Polypropylene
DimensionsExterior
18.3 x 13.8 x 6.8" / 464 x 350 x 173 mm
Interior
17 x 11.5 x 6" / 431.8 x 292.1 x 152.4 mm
Weight6.1 lb / 2.8 kg
Packaging Info
Package Weight7.95 lb
Box Dimensions (LxWxH)18.5 x 14.7 x 7.4"

Related Questions and Answers

Q: 1. Can you fly with this as a carry-on?

A: At 23.5 x 11.5 x 13.00 inches this is going to be just a bit too larger for carry-on which is normally 22 x 14 x 9 inches.

Q: 2. Would this bag fit the FS 5 and the Zacuto recoil rig altogether ?

A: In order to fit the Sony FS5 and its Zacuto Recoil in the RIG-FS5Q, the viewfinder arm and the grip arm would most likely have to be removed. For a case that should be big enough, (you may have to fold the EVF and grip arms) we suggest the Porta Brace RIG-2SRK Rig Camera Case (Black) B&H # PORIG2SRK. Since we cannot test this configuration, if you have the camera and rig, measure them in working configuration and folded (if possible) and see if they fit in the dimensions of the case which are 22.0 x 11.0 x 13.5 (55.9 x 27.9 x 34.3 cm)

Q: 3. Will this fit a Sony pxw-x70?

A: Yes, the Sony PXW-X70 and the PXW-Z90 are similar in size, and the PortaBrace Rain Slick Camera Cover for Sony PXW-Z90V Camcorder would work with the X70.

Q: 4. I also have a SONY NX70U. I wonder if it fits too.

A: Not that we are aware of as the PXW-X70 has a different design over the NX70U. Instead we recommend the Porta Brace PB-2550 Hard Case with Foam (Blue) for the NX70U, BH #POPB2550F. https://bhpho.to/2zqcZTO

Q: 5. Is this TSA approved for the cabin?

A: The total of it's dimensions does not exceed 45 linear inches (or 114 cm) in combined length, width and height, including any handles and wheels for carry on baggage. That is the rule on major airlines. Of course you should check with the airline you are using.

Q: 6. Will a laptop fit in this bag?

A: Depending on what additional items are stored with it, with interior dimensions of 16 x 10 x 7.25" then a laptop (depending on its dimensions) can easily fit, but no dedicated compartment is included on this particular bag.

Q: 7. As shown in the picture, can the foam body be pulled out of the case and turned around 180 degrees so when carried the camera body is down in the middle of the case and the mic hold is on top parallel to the carry handle?

A: Foam inserts are adhered to the interiors of such cases, and will not likely be able to be rotated without breaking the bond of the adhesive.

Q: 8. Can I take this on a plane as a carry-on?

A: You cannot. This case has external dimensions of 32.75 x 17.00 x 13.00" which is too larger for carry-on.

Q: 9. Hello, would this raincover allow a mounted Lumecube on a PXW-Z90V?

A: No, the PortaBrace Rain Slick Camera Cover for Sony PXW-Z90V will not provide enough room for you to mount a Lume Cube to the top of the camera.

Q: 10. Does anyone have the dimensions on this case? I noticed there is nothing showing under 'SPECS' on this listing. If you could give me height x width x depth. I will be putting it inside another case for transporting and need to know dimensions. Thank you.

A: Currently we are awaiting more information from the manufacturer. By looking at the illustrations and knowing the size of the PXW-X70, is it my guesstimate that the case is approximately 21 x 15 x 8 .

19/09/2024

This is my first case for camcorder and I love it! X70 do not come with any case so I purchased this SKB case. Its fits perfect with ALL OF THE ORIGINAL accessory's that PXW-X70 comes with. If you attach bigger battery or tripod head mount it will not fit, should be obvious. I've managed to store : 1. Sennheiser KA 600 - XLR Female to 1/8 TRS Male Connection Cable 2. Auray DUSM-1 Universal Shock Mount 3. Manfrotto Clamp-On Zoom Remote Control (same aria, right above XLR Handle Unit rail) 4. Xcellon CR-P2P Portable USB 3.0 Card Reader 5. Head mount for E-Image EK60AAM Fluid Drag Video Head One more thing to add: ITS WATER PROOF!!!

5
23/07/2024

I have a Sony PXW-Z90V, and it fits perfectly.  I love it, totally worth it.  Only downfall is that the tripod adapters have to come off every time I put it in the case.

5
18/07/2024

Has room for my Z90 and all accessories, including Sony's battery charger (which I had to get separately). Everything feels very secure and protected.

5
08/07/2024

This case fit the camera and accessories perfectly. The latches are easy to open, but feel secure.

5
24/06/2024

Solidly built case with great attention to detail and build quality. This case really is the business. You can tell straight out the box your camera is going to be well protected against knocks and drops inside the case. It really is simply an awesome product. Wish I had more camera gear so I could more of these! Can't wait to get my NX80 into it!

5
01/06/2024

This case will protect your camcorder from damage. Well built and the camcorder fits very firmly into it. I would recommend it to anyone who owns a PXW-X70.

5
13/05/2024

Good quality

5
09/04/2024

This case fits the newer model sony pxw-z90. It has plenty of space for accessories. Everything inside feels nice and safe.

5
30/11/-0001

Overall I love this case. It's rugged, and the camera fits perfectly. I'm actually using it for a Sony Z90 rather than X70, but since the body is the same they both fit equally well.


One suggestion would be deeper wells for batteries. I have multiple high capacity batteries and they're too long to fit in the battery slots, so I have to put them in the big miscellaneous section, where they tumble around.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Shure Movemic Usb-c Male Cable (15")

$87.00 $107.01

Tiffen 86mm Cc10m Magenta Filter

$839.85 $1,049.81

Carson 10x25 Trailmaxx Compact Binoculars

$104.97 $145.91

Godox Scrim Flag Kit (24 X 36")

$477.00 $758.43