The 6X-500 from Lindell Audio is a single channel microphone preamp mated with a two channel Pultec style EQ, and housed in a 500 series enclosure. It features an all discrete design based upon the 990 amplifier. The preamp delivers up to 65 dB of gain and has switchable 48V phantom power and a polarity switch.

The EQ features low- and high-frequency boost with up to 15 dB of boost in the high end. The 6X-500 fits in all 500 series compatible power supplies (required and sold separately).

Single Channel    Transformer Coupled Balanced I/O    65 dB of Gain    2-Band EQ    3 Stepped Frequency Centers    Phantom Power    Polarity Switch    Based on 990 Amplifier    Requires 500 Series Power Supply

Transformer coupled balanced input and output

Up to 65 db of gain

Passive Pultec Equalizer using inductor plus 990 gain make-up amplifier

Switched three step low frequency boost

Switched three step high frequency boost

Switchable 48V phantom power

Polarity reverse switch

Selectable high boost bandwidth on PCB

Pin compatible with 990 and 2520 type op-amps

5-LED VU meter

Related Questions and Answers

Q: 1. The link for the Sony Compatibility chart is broken, so, I must ask ... will this work with the Sony Alpha a6500?

A: The a6500 is compatible with this remote as per the following chart: https://bhpho.to/2WlWGUA

Q: 2. How can I use a flash or flash trigger?

A: The Extenda does not need to be in the Hotshoe. It is connected to the camera with the USB cable going into the side of the camera. The Flash or Flash trigger can go into the Hotshoe. As an alternative mounting option for the Extenda you can get the Vello Dual-Shoe Bracket with Grip linked here to leave your Hotshoe free. https://bhpho.to/3teh4Vw

Q: 3. Can you use the max frame release (Nikon 500-10fps) or does it have to be set on single shot?

A: As per the manufacturer, continuous shooting will work, but the frame rate is drastically reduced. Generally, it is recommended to use single shot mode.

Q: 4. What are the maximum settings for the intervalometer?

A: 999 shots for what ever time in between shots

Q: 5. Will this work with Photomechanic?

A: Unfortunately, the Vello LW-500-U Extendá Plus for Lightroom and Capture One Wireless Tethering is not compatible with Photomechanic.

Q: 6. What kind of cable should you use with a Z7?

A: You would need a USB-C cable to connect the Nikon Z7 Mirrorless Camera to the Vello LW-500 Extendá Plus Wi-Fi Camera Controller for Select Canon, Nikon, and Sony Cameras. You can use the Pearstone USB 3.1 Type-C to USB Type-A Charge & Sync Cable (3'), BH #PEUSB313CMA3 (https://bhpho.to/2NS6bXO).

Q: 7. Are there plans to add support for the Nikon z6/z7 in the near future?

A: The manufacturer is currently working on a update to support the Nikon Z6/Z7.

Q: 8. How conect to Lighroom un MAC, what is procedure

A: Here is the Vello LW-500-U Extendá Plus link for Lightroom and Capture One Wireless Tethering user manual: https://www.bhphotovideo.com/lit_files/543171.pdf.

Q: 9. Does the device automatically download images as created to the iPhone or tablet?

A: No, it is only a camera controller via smart device.

Q: 10. Is it fully functional with FujiFilm GFX 100S?

A: Unfortunately, the Vello LW-500 Extendá Plus is not compatible with the Fujifilm GFX 100S.