The TPRO-RXDS 1RU x 1/4 Wide Brick Receiver forms part of FSR's TwisterPro UTP Transmitter/Receiver system. Combined with an optional TPRO-TX transmitter, this receiver allows for long-distance transmission of RGB video, stereo audio, RS-232 data and IR control data. Offering the highest level of signal integrity and error-free transmission, this system uses affordable, easily installed Cat-5/5E/6 cable--a major advantage over bulkier, traditional video and data cables.

Through cable runs of up to 1000 feet, the TPRO-RXDS uses RJ-45 connections to transmit not only all RS-232 and IR data, but video resolutions up to 1920 x 1080 and 24-bit stereo audio @48kHZ. A single VGA port handles RGB, component, composite or S-Video signals, while RS-232/IR data is carried via 9-pin DSub. Full expandability is possible using separate 1-in/8-out hubs, which can be cascaded to allow up to 512 outputs.

Unlike the TPRO-RXD, the TPRO-RXDS uses skew compensation to adjust for the delay skew, or loss of color convergence, that can affect images transmitted over cables longer than 300 feet (91.4m). This feature allows fine-tuning of the image by merging the misconverged red, green, and blue lines back into solid white.

This receiver is ideal for control rooms, classrooms, houses of worship, boardrooms and other applications needing reliable video, audio and data transmission with zero electrical interference. Its "brick" style enclosure can be used on any surface, or it can be rack mounted with an optional rack kit.

Delay Skew Compensation    1080p Video/Stereo Audio    RS-232 Data/IR Signals    Uses Cat-5 Type Cable    1000 ft Reach    RJ-45 Connection    Adjustable Gain Control    Highest Level of Signal Integrity

VGA 15-pin DSub female connector for video output

DB-9 male connector for RS-232 output

CAT-5 and UTP connections are via RJ-45 connectors (EIA/TIA-568B)

Video resolutions up to 1920 x 1080 (1080p)

Cable skew compensation adjustments

Adjustable gain control on front panel

Compatible with RS-232 standards, most IR devices

Simplex RS-232 up to 19.2k baud

LED indication of video, RS-232 and IR data activity

Custom carrier frequencies are available per customer request

Extends IR control up to 1000 feet

Normal and high output emitter power level settings

High output power level settings up to 60mW allows for multiple emitter connections (emitters sold separately)

Integrated IR sensors in addition to hard-wired input options

UL and CSA approved external power source (wall plug-in) included

High quality 24-bit stereo 48 kHz sample rate

Over-current sensing with LED indication

Optional 1 in/8 out TPRO-HUB with power supply available

Unit can be powered at either transmitter or receiver end, or through optional hub

Related Questions and Answers

Q: 1. When was this EIZO model released?

A: It was released on May 11, 2020. https://www.eizo.com/news/eizo-releases-27-inch-hardware-calibration-monitor/

Q: 2. Is there any advantage to buy the built-in colorimeter vs using an external one, except for the convenience of regular auto calibrating? Or is it better to spend a bit more on an external one and have more flexibility?

A: When you have the built in colorimeter, you can set specific times for the monitor to calibrate. With an external color calibrator, you will be able to not only calibrate one monitor but multiple monitors.

Q: 3. https://www.bhphotovideo.com/c/product/1302827-REG/eizo_ch2700_bk_lcd_shading_hood_for.html Does this fit the CS2740?

A: Yes, CS2740 is a listed compatible model for the Eizo hood above.

Q: 4. Since this panel is 8bit + 2bit FRC Does anybody see the banding in gradients on enlargements?

A: No, banding should not be noticeable when enlarging images on the EIZO ColorEdge CS2740 26.9" 16:9 Wide Gamut 4K IPS Monitor.

Q: 5. Does this monitor also offer the different reading modes & EyeCare feature like the FlexScan EV2785?

A: No, there is no options for reading modes or EyeCare features.

Q: 6. Other than for Photo editing, does anyone use this for CAD, such as AutoCad and doing RTRT (Real TIme Ray Tracing)?

A: The EIZO ColorEdge CS2740 26.9" 16:9 Wide Gamut 4K IPS Monitor with EX4 Calibration Sensor is a great option for usage with Adobe Photoshop or Adobe Lightroom. Or you can use it with video editing software as well. This monitor has 99% of Adobe RGB built in.

Q: 7. Does the monitor have built in audio, or are external speakers required?

A: The EIZO ColorEdge CS2740 does not have speakers built-in.

Q: 8. Can we fix a hood to this model? And if yes any specific model

A: Yes. EIZO has a specific hood for this model: https://bhpho.to/3toIjwg

Q: 9. I have an older MacBook Pro (late 2013). Would this monitor work with this computer? It would be used for photo editing (primarily photoshop).

A: Yes this monitor would be compatible with a MacBook 2013 and would be a great monitor for photo editing.

Q: 10. how do I attach this lens to a GH5?

A: There are no lens adapters for mounting an E-mount lens like this to a Micro Four Thirds camera like the GH5.