The Apantac DA-SDI-HDTV SDI to HDMI/DVI over Ethernet Converter features one 3G-SDI capable SDI input with two looping SDI outputs. It also features one RJ45 output port that transmits an HDMI/DVI signal long distances over affordable category cable.

Converts SDI to DVI/HDMI with CATx extended output

Converts HDMI to SDI with looping input and dual output

Compatible with Tahoma Multiviewers

Compact design

Reclocking DA outputs

3G/HD/SD-SDI compatible

Cable reaches up to 393.7' (120m) for 3G-SDI, 459.3' (140m) for HD-SDI

Related Questions and Answers

Q: 1. What is the latency incurred during the cross conversion if I want to feed hdmi and then output SDI to a wireless transmitter?

A: This is not a published specification. But switchng and conversion is very quick with low latency assured by ATOMOS

Q: 2. Will this monitor have any latency or lag with a Panasonic GH5 when using for focus and shooting "run and gun" style?

A: HDMI has an inherent delay regardless of the device. You can experience lag from the cable length or port on either end. If you want a zero delay experience, you can use the 3G-SDI input with a camera that can output it.

Q: 3. I it possible to have scopes in full screen? If so, can you have the shot half mixed with scopes?

A: The OS that all the Atomos devices use allows one to make this scopes almost full screen; it's not going to be just scopes. it will take up about 60 to 75% of the screen so you'll still be able to see the image through the scopes.

Q: 4. Does the screen have anti reflective coating or anti glare?

A: The screen does not have anti-reflective coating or anti-glare.

Q: 5. Will this work on a Bmpcc6k camera?

A: Yes, the following unit will work but will only output in the following formats not 6k, HDMI (8/10-Bit 4:2:2) DCI 4K: 60/59.94/50/30/29.97/25/24/23.98 UHD 4K: 60/59.94/50/30/29.97/25/24/23.98 1080p: 60/59.94/50/29.97/25/24/23.98 720p: 60/59.94/50 SDI (8/10-Bit 4:2:2) DCI 2K: 60/59.94/50/30/29.97/25/24/23.98 1080p: 60/59.94/50/30/25/24/23.98 720p: 60/59.94/50

Q: 6. When using a battery and a dummy battery to DTAP simultaneously, will the battery drain first? Or does it pul power from both at the same time?

A: The Atomos Shinobi 7" 4K HDMI/SDI Monitor will draw power sequentially, so it would drain one battery first and then the other.

Q: 7. What cable would I need to control the menu of my Z Cam E2-F6 with this monitor?

A: You will need a USB-C to Serial LANC cable. Atomos USB Type-C to Serial LANC Calibration Cable (13") https://www.bhphotovideo.com/c/product/1562063-REG/atomos_atomcab018_usb_c_to_serial_calibration.html

Q: 8. Is there a Hawk Woods gold mount adapter that will work for this monitor?

A: No, Hawk-Woods did not make a particular plate for the Atomos Shinobi 7" 4K HDMI/SDI Monitor. An alternative route to consider to power the display from a gold mount battery is using a cage, a compatible battery plate, and a D-Tap to 2.1mm barrel connect. For example, the SHAPE Monitor Cage for Atomos Shinobi 7" with the SHAPE Pivoting Battery Plate for Shogun 7 Monitor Cage (Gold Mount) and the Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 50"). See the links below: https://bhpho.to/3AE9aKv https://bhpho.to/3AGOL7t https://bhpho.to/3oPOEUl

Q: 9. Hi. Does it have EL zone metering? The ninja V's were able to with an os update. Or is it a paid update?

A: The Atomos Shinobi 7" 4K HDMI/SDI Monitor does not have EL Zone Metering.

Q: 10. Will this support the Sony DSC RX10IV with all functionality?

A: No, the Atomos Shinobi 7" 4K HDMI/SDI Monitor will not have camera control support for the Sony Cyber-shot DSC-RX10 IV Digital Camera. You should consider the PORTKEYS LH5P II 5.5" Touchscreen Monitor with Camera Control for Sony FS5/FS7/FX6/FX9 (BH #POLH5PIISLNC • MFR #LH5P II -SLANC) instead.