The 220V 24116EBLR ViewShare Advantage Electrol 69 x 110" Ceiling-Recessed Motorized Screen (fabric, roller, and motor available separately) from Da-Lite integrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

Designed to eliminate the extra step of finishing the screen with trim, the screen features ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening, eliminating the need to complete additional trim work. Sliding installation brackets are provided to make it easy to attach the screen housing to the structure above the drop ceiling.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24116EFLR.

130" Diagonal / 16:10 Aspect Ratio    High Contrast Matte White Surface    1.1 Gain / 100° Viewing Angle    Smooth Roll Technology    Box Only (No Screen Fabric)    SCB-100 RS-232 Control    Jabra SPEAK 410 MS Speakerphone    Integrated HD Webcam    Low Voltage Control (LVC)

High Contrast Matte White is a fiberglass surface with a gray base for deeper reproductions of black, which improves contrast. It is for non-high-definition projection and environments with moderate ambient light. Cone: 100° Gain: 1.1

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. I want to the buy the Zeiss Milvus 18mm ZE and the correct focus gear at the same time, from B&H. Is this the right gear?

A: Yes, the Tilta Seamless Focus Gear Ring (69 to 71mm) is the correct gear ring for the ZEISS Milvus 18mm f/2.8 ZE Lens.

Q: 2. Will this hood fit to the 18-55mm lens of the Nikon D5100..??

A: I have a D5300. The Vello HB-69 is a clone of the Nikon HB-69. I went to the Nikon website and looked for the list of compatible lenses. Look at the lens model number on the front of the lens. Mine says: AF-S Nikkor 18-55mm 1:3.5-5.6GVRII.The Vello was suggested by the sales rep as a cheaper option at half the price. After comparing the build quality to a Nikon HB-34 I bought, I should have spent the extra $12.50 and bought the Nikon HB-69. The Vello is thinner plastic and the bayonet base has less heft.

Q: 3. Will this strobe work with 3rd party modifiers, or only the supplied softboxes?

A: That model strobe uses the Elinchrom mount also called EX. There are a few different manufactures that make modifiers with that mount, Elinchrom, Impact and Interfit. Note to be careful when picking it out that it is the correct mount. Impact and Interfit make different mounts not just EX.

Q: 4. I have set this up and use an on-camera flash to trip the two lights BUT I am NOT able to vary the output of the flash. I dial from full to 1/8 but only the modeling light varies in intensity. Am I doing something wrong?Lucian

A: Just to be sure - when reducing flash power, you must dump the flash first and then measure power. This means if the flash is at full power and you reduce it to an 1/8, you must first fire a flash to dump the power out of the flash capacitors and reduce their charge to an 1/8 and then measure your flash output. If the flash remains at full for a 3rd and 4th shot, then it may be faulty.

Q: 5. Will one of these fit the thicker part of the zoom ring on the canon RF 24-70 lens?

A: Yes. We highly suggest the following ring for best end-user performance Cool-Lux LuxGear Follow Focus Gear Ring (72 to 73.9mm) BH #COLG7273 • MFR #951416 https://www.bhphotovideo.com/c/search?q=Lux%20Gears&sts=ma

Q: 6. Can I use this with the Elinchrom Speedring for Rotalux Deep Octa Indirect 59" / 150 cm?

A: I don't believe that the indirect ring come off

Q: 7. Are there two monolights in this kit? As the title says? Because when i select what is in the box list it only shows one monolight only.

A: Yes, there are two.

Q: 8. Can I use this with Bowens type flash head?

A: Yes, since you have to buy the appropriate speed ring to use it with any flash head. For Bowens-S, you'll need this additionally: https://bhpho.to/39y8rOk

Q: 9. Can I mount this to a Hensel flash if I have a speed ring?

A: Yes. You can use it on Hensel flash if you have this speed ring for it https://www.bhphotovideo.com/c/product/1352664-REG/elinchrom_el26544_rotalux_speedring_f_hensel.html

Q: 10. will this fit nikon d3300 kit lens af-s nikkor 18-55mm 1:3.5-5.6G ?

A: It fit my stock lens 18 - 55 mm 1:3.5-5.6GII. When putting it on twist slightly counter clockwise to align then clockwise till it locks.if the lens feels loose you haven't turned it quite far enough.